Hey,
This is going to be an interesting news column. It will point out the extreme need for everyone to be alert, informed and involved.
Following are pieces of an email from a very active motorcycle rights advocate.
“In general, I like your Freedom Flier copy. One suggestion would be to add a section on the effect CO2 has on human breathing, and how adverse effects can be mitigated simply through keeping the air in your home clean. I mention this because many in the public are convinced that significant risks posed to human health by CO2 emissions are not only a regular occurrence but are also similar in severity to those supposedly posed to the planet.
“Having been in cities in China where the air pollution was so bad that my eyes and lungs were burning even though I was in my room inside a high-end hotel, pretending that excessive amounts of CO2 in the atmosphere are not dangerous is shortsighted. The point is that only under such extreme circumstances are humans normally at risk. Even in the most polluted cities in the U.S. and Europe, this isn’t the case. A simple explanation that CO2 is not dangerous to human health except in the most extreme conditions would be a good thing to add.
Mark is completely off base. CO2 is not a pollutant. We thrive with more CO2. We currently have 420 ppm in the atmosphere, actually a very low number. You will see a report below that will blow your mind.
The real point is that we need to learn the differences, the data and the positive aspects of CO2. This news is full of twists and turns all around inaccurate info that we’ve been fed for almost 20 years. The truth must return…
The Bikernet Weekly News is sponsored in part by companies who also dig Freedom including: Cycle Source Magazine, the MRF, Iron Trader News, ChopperTown, BorntoRide.com and the Sturgis Motorcycle Museum.
DICK ALLEN SPRINGERS RETURN—
Irish Rich at Shamrocks fabrication in Sturgis is up to no good. I even had a small machining part in the process.
Rich is bringing the classic Dick Allen Springer back to life. I put my name on the short list.
They will be all-American made, some with factory springer parts, Paughco components, 5-Ball Racing machined pieces and Clauser Machine (Spearfish, SD) help. Hang on for more reports as the first few come to life.
–Bandit
LE PERA SEAT OF THE WEEK—Don’t miss the TailWhip Double Diamond Collection.
Overview
Taking the Kickflip one step further
If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail of the TailWhip will give you what you are looking for!
Available in Basket Weave, Double Diamond Stitch, Pleated Stitch, or anything your imagination comes up with
Driver Area 10.75″ Wide with 6″ of Back Support, Passenger Area 7″ Wide
Molded Marathon Foam
BikerTec Custom Cover
Highly detailed powder-coated steel carpeted base
Family owned and operated, Made in the U.S.A.
Specs
Driver Seating:
10.75″ Wide
Passenger Seating:
7″ Wide
MSRP:
$571.00
Part Number:
LK-581DD [’06-’17] Dyna
PROGRESS REPORT FROM JERRY GREER’S IN DEADWOOD—
Todd sent a pic this morning.
–Eric Neubecker
It was sixth straight quarter of growing gross profit margin. For the first time since Polaris acquired the Indian name and developed their own ground-up Indian Chief in 2011, the storied brand rolled into the black. They’ve done a class, high-tech, performance and classic job since the beginning.
LETTERS FROM HOME IN NORTH CAROLINA! This is a terrific, classic song, two-person, small theater show, that covers much of our lives and honors veterans.
We are in full swing editing the Letters From Home 50-States Tour Documentary!
From January to May of 2023, Letters From Home engaged in a 50 States Tour, performing one show in each of the United States. Filmmaker Jack Walterman traveled with the crew to capture the tour, and a documentary is currently in post-production under the direction of Dan Beckmann. This film hopes to feature the diverse beauty of America through the eyes of Letters From Home and its audiences. It will release on Veterans Day, 2024.
We really need your help on the way to the finish line! Please help us impact as many people as possible with this journey. Check out the sponsorship levels below or CONTACT ERINN to make a donation today!
THIS JUST IN FROM FLORIDA, 100-WORD FICTION CONTEST ENTRY–
Mountain Ride
In the dark of the overcast day, I navigated the mountain road. Curve after curve then slowing for the switchbacks, the chill started to get to me. I froze to the bone. I contemplated pulling over to walk off the cold. As I made the last turn the sky brightened and the warmth of the sun hit my face.
AHHH, no need to pull over now.
Well, maybe for fuel.
–Rhys
Daytona, FL
NASH MOTORCYCLE LEATHER BELT IN COLLABORATION WITH CHOPPERS MAGAZINE–
Nash Motorcycle teamed up with our friends over at Choppers Magazine to create this special collaborative belt. This 100% U.S. made full grain leather belt is embossed with “Choppers Only” across the back and has a tasty hit of branding from Choppers Magazine and Nash Motorcycle Co.
Belts come in Natural or Black leather and your choice of old nickel or old brass hardware.
Give Choppers Magazine a look!!! www.choppersmagazine.com
PAINTER OF THE WEEK–Rob Art-Custom Rob’Art Custom
Robin Besse Airbrush Designer 550 chemin des Bruyères 69480 Pommiers, France Email: robin.besse@outlook.fr
–Sam Burns
Art Curator
Bikernet.com™
THIS JUST IN FROM THE KLOCK WERKS EMPIRE–Fresh Year, Fresh Shine
Shine Werks, developed by Brian Klock himself, is not just a cleaning product; it’s a commitment to excellence in motorcycle care.
Showroom Shine: Shine Werks delivers a brilliant, showroom-quality shine that will turn heads wherever you go. Your motorcycle deserves to stand out, and Shine Werks ensures it does just that.
Advanced Protection: Beyond its cleaning prowess, Shine Werks provides a protective wax coating that acts as a shield against the elements. Keep your motorcycle looking pristine while safeguarding it from the rigors of the road.
Versatile Application: Whether you’re looking to revitalize your bike’s exterior, add a glossy finish, or protect various surfaces, Shine Werks is your all-in-one solution. It’s designed for motorcycles, but its versatility extends to other surfaces (which you’ll find out more about below…) making it an essential part of your cleaning arsenal.
QUOTE OF THE WEEK–“You never know how a horse will pull until you hook him to a heavy load.”
–BEAR BRYANT
EPOCH TIMES
BRAND New Bikernet Reader Comment!–
WHACKO WACO, TEXAS ONCE MORE
https://www.bikernet.com/pages/WHACKO_WACO_TEXAS_ONCE_MORE.aspx
If they truly believed Beaudin’s murder was being planned he would have been in protective custody. Someone has it out for Seth?
— Jessica Thigpen
Waco, TX
GREASE & GEARS THIS WEEK–The moment has arrived! Your favorite weekly motorcycle talk show is starting right now, and we wanted to ensure you don’t miss out on the action. We have a front-row seat waiting for you! Thank you for your continued support!
TODAY’S CLIMATE CRISES IS A FAIRY TALE—This is just a snippet of a fantastic article, everyone should read.
As atmospheric CO2 increases, its GHG effect decreases: CO2’s warming effect is 1.5°C between zero and 20 ppm, 0.3°C between 20 and 40 ppm, and 0.15°C between 40 and 60 ppm. Every doubling of atmospheric CO2 from today’s levels decreases radiation back into space by a mere 1%. For most of the past 800,000 years, Earth’s atmospheric CO2 has ranged between about 180 ppm and 320 ppm; below 150 ppm, Earth’s plants could not exist, and all life would be extinguished.
Today’s global atmospheric CO2 levels are ~420 ppm. Even at these levels, plants are “partially CO2-starved.” In fact, standard procedures for commercial greenhouse growers include elevating CO2 to 800–1200 ppm; this enhances growth and crop yield ~20–50%. As shown by satellite since 1978, increased atmospheric CO2 has helped “green” the Earth by more than 15 percent, substantially enhancing crop production.
If global atmospheric CO2 was ~280 ppm in 1750, and it’s ~420 ppm today, what’s the source of this 140-ppm increase? Scientists estimate that human-associated industrial emissions might have contributed 135 ppm — with “natural causes” accounting for the remaining 5 ppm.
In Earth’s history, the highest levels of atmospheric CO2 (6,000–9,000 ppm) occurred about 550–450 million years ago, which caused plant life to flourish. CO2 levels in older nuclear submarines routinely operated at 7,000 ppm, whereas newer subs keep CO2 in the 2,000- to 5,000-ppm range. Meanwhile, ice core data over the last 800,000 years show no correlation between global warming or cooling cycles and atmospheric CO2 levels.
CO2 in our lungs reaches 40,000–50,000 ppm, which induces us to take our next breath. Each human exhales about 2.3 pounds of CO2 per day, which means Earth’s 8 billion people produce daily 18.4 billion pounds of CO2. But humans represent only 1/40 of all CO2-excreting life on Earth. Multiplying 18.4 billion pounds by 40 gives us 736 billion pounds of CO2 per day. This approximates the overall CO2 excreted by the total animal and fungal biomass on the planet.
Daily emissions from worldwide industry in 2020 were estimated to be 16 million metric tons of CO2 equivalents. If one metric ton is 2,200 pounds, then “total industrial emissions” amount to 35,200,000,000 (35.2 billion) pounds of CO2 per day. This means that the entire animal and fungal biomass (736 billion pounds) puts out more than 20 times as much CO2 as all industrial emissions (35.2 billion pounds)!
Can any clear-thinking person comprehend the facts above and still create a company with idiotic plans to “sequester CO2” or “sequester carbon”? Scientifically, “net zero” and “carbon footprint” are meaningless terms. There is no “climate crisis.”
–By Daniel W. Nebert
From the CO2 coalition website
SUPPORT GOOD TIMES QUICK–
Y’all Need Motorcycles Five Panel Snapback
$ 35.00
Estimated delivery to United States Feb 7–12
Support Good Times Y’all Need Motorcycles five panel snapback hat in black or white. Embroidered design, premium wool blend, high profile 3 ¾-inch crown, flat visor with classic green undervisor, matching plastic snap, and hard buckram.
STEP INTO THE BIKERNET EMERALD THOUGHT TEMPLE FOR TODAYS INSPIRING SERMON–Embrace the Challenges Disappointments and Obstacles
Within every adversity is the seed for equal or greater benefit.
True growth doesn’t stem from our successes; rather, it flourishes in the face of mistakes and challenges. Einstein wrote that we never solve a problem at the same level of consciousness that it was created in. What he was telling us is that we must move to a higher level of consciousness in order to find the solution. Why would we want to focus our energy on the problem instead of taking that same negative energy and find the solution.
My friends we will face challenges every day, some small, some monumental. This is just the way it is.
It is up to us whether they are going to handle us or are we going to handle them.
No matter what, we have a choice of which way to go. Les Brown wrote “Our ability to handle life’s challenges is a measure of our strength of character.”
Affirmation: Today I embrace and challenge for I Know that they are an opportunity for me to grow. I am confident in the inherent solutions within me.
I learn from the lesson, rise above the situation and my Life is better for it. Today I am in charge of any situation.
And So It Is
Namaste’
–Yale
Yale Custom Motorcycles
“Being challenged in life is inevitable, being defeated is optional.” – Roger Crawford.
[page break]
MORE STUFF YOU NEED TO KNOW FROM THE TOWN OF BUFFALO CHIP–Coming February 17
The 2024 Sturgis Buffalo Chip
Poster Model Search
Presented by Twisted Tea, Pepsi, Fozzy’s Cycle Shop, High Seas Rally, Silverado Franklin, Snap-on Tools of the Black Hills and XRock
Who’ll Be the Face of the 2024 Party?
If you’ve ever dreamt of becoming a model, have a girlfriend, friend or wife you think is worthy, or you just like to be around pretty women, the Buffalo Chip’s annual Poster Model Search is worth learning more about. This regional search is about to bring women out of the woodwork to compete for the chance to become the 2024 face of the Best Party Anywhere and win $16,000 in cash and prizes!
BLACK HILLS BIKERNET GUN NUT REPORT–
The South Dakota legislature continues work on protecting our Second Amendment Rights. Recently, two pro-gun bills, SB 39 and HB 1035, passed their respective chambers and are now headed to Governor Noem’s desk for signature.
Please contact Governor Noem and urge her to SIGN SB 39 and HB 1035!
Senate Bill 39, prohibits homeowners associations from placing restrictions on firearms and ammunition beyond state law.
House Bill 1035, extends the grace period for renewal of an enhanced permit to carry from 180 days to 12 months.
Again, please contact Governor Noem and urge her to SIGN SB 39 and HB 1035!
Hope Timoll
NRA-ILA Information Specialist
https://www.nrailafrontlines.com/
NEW FROM COMPETITION DISTRIBUTING–Enter a Photo for a Chance to be Featured in next year’s calendar!
We are making a calendar for 2025! Submit your high-resolution photo to kelsey@competitiondist.com for a chance to be featured.
MORE INSPIRATIONAL QUOTES FOR THE WEEK–“The one lesson I have learned is that there is no substitute for paying attention.”
–DIANE SAWYER
SHARP NEWS FROM RMJ TACTICAL–
Greetings! After a 3-year hiatus, Reid has made a batch of Kiridashi’s! These are available to purchase now!
Our resident Blacksmith, Reid, who is known to many for his custom Raven tomahawks, also makes a pretty mean knife! Here is his rendition of the classic Kiridashi. They are made from AEB-L Stainless Steel with a gorgeous dark gray forged finish. Reid hand grinds each one with a V style grind.
Each Kiridashi includes a kydex sheath with both a ball chain for neck carry, and a steel pocket clip for inside the waistband (IWB) belt carry.
For a small knife, the Kiridashi can play a big role as part of your EDC kit. They make outstanding utility blades, and are light enough to not require extra thought until you need them.
Due to the handmade nature, the texture, length and thickness will vary slightly from knife to knife.
Overall Length: 5 1/4″ – 5 3/8″
Cutting Edge: 1 1/2″ – 1 3/4″
Thickness: Around 3/16″
Weight: Around 1 ounce (without sheath)
Material: AEB-L Stainless Steel
Sheath: Kydex with ball chain and Pocket
Clip
MAMA NEEDS TO TRY HARDER–We love Mama Tried. Where else you going to see this many diverse custom machines in a rad old ballroom?
Plus, the beer and brats are always killer and the H-D Museum is always worth a trip. We’ll have a small booth set up at the Rave/Eagles Ballroom so come on by and say hi.
–BILTWELL
HANG ON FOR THE S&S Winter Power Package–
The Power Package is the ideal combination of performance and savings designed to transform your engine without breaking the bank. Combining big bore cylinders with matched cams/plate/pump and everything else a high performance cam chest needs to compliment added cubic inches and reliably make big power.
Available for all Twin Cam and Milwaukee Eight engines. Contact your dealer to get yours now at reduced pricing!
Extended Special offer valid until February 29 2024
MRF ROADSHOW STOPS–ABATE of Pennsylvania
Bikers in the Keystone State have held their Leadership & Legislative Seminar for 38 years. It is an event with a long and successful history.
This year, their panel discussion was moderated by ABATE of PA Legislative officer Ken Edwards. On the panel were Tom Jones (98th District Rep), Dallas Kephart (73rd District Rep), Eric Mershimer (Coordinator ABATE of PA), Zach Farmer (AMA) and Eric Bugaile (Lobbyist Archer Public Affairs).
Rounding out the seven (7) person panel were the MRF’s Traci Beaurivage and MRF Board Member Andy Kelly. The speakers for the banquet on Saturday were Representative Tom Jones and the MRF’s Traci Beaurivage, who challenged everyone to “be unstoppable” in growing our movement.
SHORAI LITHIUM BATTERIES–
Double the power, double the savings! For a limited time, enjoy a 20% discount when you purchase both Shorai batteries and chargers together. It’s the perfect time to elevate your power sports experience.
This exclusive deal is available for a short time only, so seize the opportunity to power up your rides with Shorai. Elevate your adventure with reliable, high-performance batteries and chargers.
Use this code during checkout to enjoy a 20% discount on your entire purchase.
POWERDUO20
Why Power Up with Shorai?
Premium Batteries: Shorai LFX batteries deliver unparalleled energy, faster starts, and are up to 80% lighter than traditional lead-acid batteries.
Advanced Chargers: Our chargers are designed to maximize battery life and performance. The Shorai BMS-01 charger is your battery’s best friend, ensuring optimal charging, balancing, and maintenance.
HOT New Bikernet Reader Comment!–Review: Chopper Hobo by Shovelhead Dave
https://www.bikernet.com/pages/Chopper_Hobo_by_Shovelhead_Dave.aspx
I’ve not heard / seen JJ Solari’s name in years. Motherfucker you inspired me to state writing while I was in prison in the 90s. I’d be dead now if not for your rants in biker mags. Good to stumble across you.
–Gus Guess
Summerville, SC
IN SUPPORT OF VIETNAM VETERANS–Fellow South Dakotans,
Senator Mike Rounds will be hosting a series of Vietnam Veteran Lapel Pin Ceremonies to recognize, honor and thank South Dakota’s Vietnam and Vietnam-era veterans for their service, valor and sacrifice.
To commemorate the 50th anniversary of the Vietnam War, the Department of Defense established this program and authorized Commemorative Partners, including Senator Mike Rounds, to distribute lapel pins to Vietnam and Vietnam-era veterans. If you wish to learn more about the Vietnam Veteran Lapel Pin program, click here.
Living U.S. veterans who served on active duty in the U.S. Armed Forces at any time during the period from November 1, 1955, to May 15, 1975, regardless of location, are eligible to receive one lapel pin. If you or someone you know is a Vietnam or Vietnam-era veteran, Senator Rounds welcomes attendance at these ceremonies for veterans to be presented with a pin and to enjoy the camaraderie of your fellow veterans.
Details for each event are listed below:
YANKTON
Tuesday, February 13
10:30 AM CT
Best Western Kelly Inn
1607 East Highway 50
SIOUX FALLS
Tuesday, February 13
3:00 PM CT
SD Military Heritage Alliance
1600 West Russell Street
PIERRE
Wednesday, February 14
3:00 PM CT
American Legion
520 South Pierre Street
RAPID CITY
Thursday, February 15
2:00 PM MT
David Lust Accelerator Building
18 East Main Street
Senator Rounds’ office kindly requests all RSVP’s be submitted no later than February 7, 2024. To RSVP, please contact Shannon at (605) 343-5035 or via email to Vietnam_Pin@Rounds.Senate.gov.
TURN 14 Powersports Set to Shine at AIMExpo with Great
Products, Autographs and an Epic Party
Turn 14 Powersports and its parent company, Turn 14 Distribution, are gearing up for a significant presence at the upcoming AIMExpo, the powersports industry trade show scheduled to take place in Las Vegas February 6-8, 2024. Great products, autographs from top motorcycle racers, giveaways and an epic party are all part of the plan.
As a sponsor of AIMExpo, the company will host the Industry Party Powered by Turn 14 Distribution on Tuesday February 6. The event will be the largest-ever gathering of industry leaders and employees from companies in every segment of the powersports business. It takes place at 6pm on the show floor immediately after the show’s opening session.
Brand managers and staff from the twelve brands owned by Turn 14 Powersports are preparing an expansive display featuring the most popular and newest products from each of the well-known brands. The layout will allow dealership attendees to view the brands grouped by category, including quad/UTV accessories, off-road and racing equipment, street riding parts and accessories, and apparel for on and off-road riders.
As a special feature of the display, Stilez Robertson of the Yamaha Star Racing team, will sign autographs on Wednesday and the ProTaper and Answer Racing staff will be joined by former motocross and supercross rider Nick Wey throughout the show, with a special autograph session on Wednesday.
Each day of the show, Turn 14 Powersports will offer custom-made caps, with designs selected by each attendee featuring the logos of each of the top Turn 14 Powersports brands.
HARLEY-DAVIDSON (HOG) Announces Departure of Chief Commercial Officer Edel O’Sullivan–Edel O’Sullivan Coyne (Edel O’Sullivan) will be stepping down as Chief Commercial Officer (CCO) of Harley-Davidson Motor Company, a subsidiary of Harley-Davidson (NYSE: HOG)., effective February 9, 2024.
Ms. O’Sullivan has served as the CCO since February 2021. As Ms. O’Sullivan pursues another opportunity outside of the Company, we wish her well with our gratitude and respect for her many contributions to Harley-Davidson over her tenure.
Luke Mansfield, Vice President of Motorcycle Management at Harley-Davidson Motor Company, has today been appointed as Chief Commercial Officer, effective February 12, 2024.
Since joining Harley-Davidson Motor Company in 2018, Mr. Mansfield has held various leadership roles at the Company, including Vice President – Chief Strategy Officer from 2018 to 2020 and most recently Vice President – Motorcycle Management from 2020 to his current appointment as CCO. Mr. Mansfield previously held senior leadership positions at Samsung and PepsiCo.
DRAG REP COMMENT— ALERT! Drag Specialties Waiver Story
https://www.bikernet.com/pages/story_detail.aspx?id=15404
Is this the national enquiree? You’ve heard something but you haven’t verified it and passing it off as fact. The page in the catalog that everyone is freaking out about has been in the previous 2 catalogs as well. You should consider doing some research before jumping to conclusions.
It’s on page 7 in this year’s catalog, it was on page 6 in the 2022 and 2023 catalogs. Drag Specialties and Parts Unlimited must print it to cover their asses. Whether an acknowledgement or waiver that dealers will be required to sign to purchase race-only parts is yet to be determined.
Nowhere does Drag require consumers to sign waivers but if the EPA requires it of the distributor to cover their asses, then dealers should follow suit to cover theirs. As of right now, it’s business as usual. The only thing that’s a certainty is that CARB and the EPA have and will continue to make it more difficult to acquire class 3 parts.
Keep your eye on the Supreme Court case Loper Bright Enterprises v. Raimondo case. A decision is expected to be made soon which could overturn the Chevron Doctrine and take away the EPA and other federal agencies abilities to interpret laws and make rules without judicial review.
–Anonymous Drag Rep
We actually did our research and Amy did a helluva job on that article. This rep caused me to dig even deeper. I spoke to Bob Kay from the IMA, who spoke to Tom Motsko from Drag Specialties.
The waiver program is happening, but S&S and Vance and Hines are paying to have many of their performance products reach compliance with the EPA, so they can be sold far and wide without issues.
We will publish another report in the very near future.
–Bandit
[page break]
CUSTOM BIKE OF THE WEEK—
I believe it was built in Thailand. See the attachments below. It is unclear if he inspired, built, or posted the photo. I’ve seen various Harley engines on the front of a Morgan, but nothing like this.
–Sam Burns
Feature Bike Editor
Bikernet.com™
IMPORTANT INFORMATION ON THE DRAG WEBSITE–Emissions and Noise Regulations
NOTE: The California Air Resources Board (“CARB”) and/or the Environmental Protection Agency (“EPA”) does not permit the use of aftermarket emissions-related part(s) that alter the performance of OEM emissions-related devices unless carb has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information. More California exhaust information is available at www.arb.ca.gov/.
NOTE: Aftermarket products, including but not limited to exhausts, catalytic converters, oxygen sensors, fuel/air controller modules, air filter kits, camshafts, O2 eliminators, and carburetors and jet kits which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street use in California unless they have been issued a CARB Executive Order.
Aftermarket emissions-related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed circuit race use only. Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws. See manufacturer’s information and state and local laws to determine what is authorized for your use on your vehicle.
The following emissions-related defined terms are used on this website (PARTS WITH THE FOLLOWING DESIGNATIONS ON THIS WEBSITE ARE NOT ILLEGAL FOR SALE IN CALIFORNIA UNDER CARB REGULATIONS):
“Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part.
“Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
NOTE: Products shown may not conform to federal, state or local emissions and/or noise regulations.
FIVE-BALL LEATHER EXPANSION—
When Frankie isn’t working on his Venice, CA Tattoo shop, he’s riding out to 13 Palms with his new girl Chanel to visit the very old Bob T.
THIS JUST IN FROM THE PRISM GANG–Sling Shot Clutch Control – 5 & 6 Speed
0900514
Regular price $314.99 USD
This kit is designed to fit all frames that have the traditional H-D 3-hole mounting pattern. This 3-hole mounting pattern includes: all Softail frames from 1987-1999 and most aftermarket chopper frames. Slight modifications and light fabrication will be required to run floorboards.
Complete the conversion with our 5 & 6-Speed Jockey Shifter Kit
Designed to be used with H-D 5 & 6 speed transmissions.
Comes with a shortened cable for proper clutch adjustment.
Made of Stainless Steel.
Consists of both forward and backward internal lever stops to help eliminate pedal flop.
Bolts directly up to Harley big twin frames.
Can be used with OEM kickstand and kickstand plate.
Kickstand mounting holes are tapped eliminating the need for nuts.
Contains a replaceable brass bushing.
Can be used on an open or closed primary.
Backing plate and lever are available in either mild or stainless steel.
All necessary stainless steel mounting hardware is included.
Sold with a tumbled finish.
Optional: Run our Shifter Peg at the pivot for foot support.
ANOTHER REPORT FROM GREASE & GEARS TV– We’re stoked to announce the release of our latest video, Gene Slater’s Chopper Friends Throwdown Chopper! We can’t wait for you to check it out.
You can watch the video now on our network Grease & Gears TV – please help spread the word and share it. Tell them you saw it on Grease & Gears TV.
Ride Safe & Be Cool!
Springtime is just around the corner; it’s time to show your ride some love before the roads clear up!
Regular maintenance is key to keeping your motorcycle running smoothly, especially in colder weather. Here’s why winter maintenance matters:
Extend Your Bike’s Life: Give your bike the TLC it deserves! Winter maintenance not only keeps your ride in top condition but also extends its lifespan. A little effort now goes a long way in preserving the longevity of your motorcycle.
One easy way to help your high-mileage rebuild process is to use the BAKER TRK (Transmission Rebuild Kit). When your transmission is calling for some attention, this kit has your back! BAKER has crafted this kit to make your rebuild as smooth as possible. After installation, enjoy reduced bearing noise with high-quality bearings and bid farewell to those pesky leaks with included gaskets and seals. Experience the difference and say hello to a quieter, smoother transmission after this kit’s installation. Your motorcycle will thank you with enhanced performance on the open road.
Give your bike the care it deserves this winter. Embrace the road ahead with confidence!
BAKER Drivetrain
9804 Old M-78
Haslett, MI 48840 USA
sales@bakerdrivetrain.com
New TECH Bikernet Reader Comment!–
AMAZING TECH: INSTALLING THE JIMS FORCE FLOW FOR TWIN CAMS
https://www.bikernet.com/pages/AMAZING_TECH_INSTALLING_THE_JIMS_FORCE_FLOW_FOR_TWIN_CAMS.aspx
–Eliot
Orland, IN
The people who manufactured JIMS force flow fan said they do not sell a fan for a 2023 Rural King special. So, I asked them why and they told me they’ve never upgraded the wiring. So, for 2000 I think 2022, 2023 , 2000 and 2024 you can buy it you can install it but they do not tell you how to wire it.
They said they do not make one for my 2023. That’s the major manufacturers response. I said give me a break it’s a fan dammit. Just tell me how to make it work off of the thermostat and the on and off switch and that’s all I care about. I would appreciate if somebody could help.
Thanks for any help
Hey,
I reached out to JIMS. I put one on the Salt Torpedo with a toggle switch. I believe the black wire was ground, then I just tested the other wires until I found the power wire, bada bing. I had it wired to a switch.
–Bandit
JIMS Contributed
Eliot –
I’m sorry about the original feedback given to you on our Forceflow – we had some miscommunication on our end that led to this.
In short, originally, we would connect the Forceflow to the dataport link on earlier bikes. Reason being, often times customers were loaded up already on their accessory port, and the dataport was pretty much always unused, and gave us a 12V source.
That said, about two years ago – the dataport was changed to an injected molded plug and we could no longer source the mating part of the plug. We had to come up with a solution.
We have developed an adapter, which converts the dataport plug over to the accessory port – and this makes it an easy plug and play install. I have a couple of proto’s made up, and if you want to go this way – I can throw one of them at you if you decide to run a JIMS Forceflow.
Or … it’s as simple as tapping into a 12V source on the bike – almost anyone can figure this out. I know you can.
Our sales manager “Monty” has a wiring diagram that shows our harness, and we could send this to you. Monty’s up to speed on how these work and can help.
Again, I’m sorry we didn’t give you this information earlier.
–Paul Platts
Director of Product & Business Development
JIMS
555 Dawson Drive
Camarillo CA 93012
Main 805.482.6913
MRF ROADSHOW STOPS–
Kansas Lobby Day
Yesterday was Biker Lobby Day in Topeka, Kansas. The event was hosted by ABATE of Kansas, with participation from the Kansas Confederation of Clubs and the MRF! They addressed profiling, autonomous vehicles (AV), preserving choice in vehicles (ICE) and fuel supply.
The MRF was well represented by their state MRF Rep and Assistants, Bill Cooper, Tony Railsback, Tammy Railsback and Tony Rawls-Riley. Also present for the event were Christy Gunderson of Iowa and MRF Board Member Eric Ross, who was a guest speaker for the event.
AMCA BLACK HILLS CHAPTER MEET– Feels like spring in the Black Hills. We had a great time at the Christmas party, it was terrific to see everyone. We will be meeting again on May 18, 2024, in Aberdeen at Carl’s for our spring meeting. Please put it on your calendar. Reminder that this is also the Olsen boy’s (Carl, Matt, Locke) birthday’s so always a lot of fun.
Our Road-run last fall was a big success, and we continue to be the one’s setting the bar for other runs. Reach out to me, if you want to share your Road Run story.
I am looking forward to seeing all of you, as you are my favorite people. Until then be safe and healthy.
–Bill Grainger
(605) 431-9163
FAB KEVIN TO THE RESCUE—Brother John bought a 1960 roller and started to work on it. The glide didn’t have the stock drum brake and for so many bikes a springer front brake system will do the trick. We went to work.
The most inexpensive way to go includes Fab Kevin’s mounting plate and a common, Tokico, 4-piston Jap bike brake caliper. We machined a spacer and offset the bracket. Bada bing, strong stopping power with class on a Panhead. John is currently rebuilding the caliper.
–Bandit
KODY NORRIS Group Signs With Upper Management For Exclusive Booking Representation
Performing on TBN’s HUCKABEE Saturday, February 3rd at 8/7c and Sunday, February 4th at 9/8c
Award-winning country & bluegrass group The Kody Norris Show received seven wins at the 2024 SPBGMA Awards in Nashville, Tennessee. The band brought home trophies for Entertainer of the Year, Instrumental Group of the Year, Album of the Year, Song of the Year, and Band (Overall) of the Year. Adding to the wins, Mary Rachel Nalley-Norris was named Fiddle Performer of the Year and Josiah Tyree won Banjo Performer of the Year. This year’s awards were held on Saturday, January 27th, at the Sheraton Music City Hotel in Nashville, Tennessee.
The Kody Norris Show won the following 2024 SPBGMA Awards:
Entertainer of the Year / The Kody Norris Show
Instrumental Group of the Year / The Kody Norris Show
Banjo Performer of the Year / Josiah Tyree
Fiddle Performer of the Year / Mary Rachel Nalley-Norris
Album of the Year / Rhinestone Revival
Song of the Year / I Call Her Sunshine
Band (Overall) of the Year / The Kody Norris Show
“I can’t believe it! I’m so happy for our band and everything we have accomplished in the last year. This is a heck of a way to kick off 2024 and we are so honored. We love bluegrass music, our fans, and everything that SPBGMA stands for!” – Kody Norris
NON-STOP, NEVER DULL AND NEVER GIVE UP—This News column speaks to the need to stay informed and involved. But wait, in the middle of all the chaos is day to day life. The evil ones seem to miss that.
Next week I need to focus on a couple of techs, including one about rebuilding a 4-speed transmission for the first time in 40 years. Hang on!
The talented Freddie Cuba sent me this shot of his new railing.
Picked up my paint at the TNT Headquarters in Spearfish. We had it flat cleared. Tim said, “Don’t touch it, the flat clear will go shiny.”
What the hell, I’m going to be touching it for the next month handling final assembly.
I machined down the dust collector on the inside of John’s hydraulic brake drum then welded it back in place. It still hit the backing plate and we removed it again.
We attended a gala event at the Deadwood Mountain Grand. The goal was to raise funds for the Sacred Mountain Retreat for drug and alcohol addicted Vets. It was a good time and hopefully we pitched in some.
It’s non-stop around here. Another tech will update the VLXAFL5 build. In the meantime we will fight for the freedom to build and ride anything you like.
–Bandit
