Todd's Cycle have came up with new products to save Builders time, plus create form and function. If you’re in Orange County come over to the shop and check it out.
Call us at 714.901.4516 or visit us at
http://www.toddscycle.com
SPRUNG SEAT MOUNTS
Spring seat mount, this mount is just under 1 ½-inch long and can be modified to your height needs. Seat mounts are tapped on the bottom with a 5/16- 18 thread. This mount can be bolted or welded to the frame. Spring seat mounts come with a shank that will accepts most springs on the market. The springs are held in place with and E clip for easy on and off applications.
TODD’S BUNG
This bung is 1 ½-inch long and is drilled and taped to 3/8-16, with an OD of ¾-inch. Use these bungs to mount fenders, oil bags, licenses plates, pipes and more. Made from weldable mild steel.
TODD’S COUNTERSUNK BUNGS
This bung is made from weldable mild steel and is 1 ¼-inch in length, with a ¾-inch OD and counter sunk for a 3/8 socket cap screw (Allens). They can be used for mounting pipes, fenders oil bags. The list goes on, you name it and you can use this part. We have countersunk bungs for 5/16 bolts, see below.
TODD’S SISSYBAR MOUNTS
This sissybar bung is made from weldable steel and is 1-inch in length, drilled and tapped to accept a 5/16-18 screw. The OD in 5/8-inch. This bung is used to mount sissy bars to fenders and to the frame. Many more applications will work, too.
TODD’S 5/16 COUNTERSUNK BUNG
This bung is made from wieldable steel and is 1-inch in length, drilled and counter sunk to fit a 5/16 socket cap screw. The OD is 5/8-inch. This bung is used to mount sissy bars to fenders and to the frame, also mounting taillights and the list goes on for this useful little buddy.
TODD’S RUBBERMOUNT TANKS MOUNTS
This little wonder holds down gas tanks to oil bags or anything else you would want to mount using rubber isolators. Used for only clean applications or educated eyes..
–Todd's
todd@todds-cycle.com
