Unleashing The Doo-Rag Tech

steed banner final

guy bending over for scarf

DO THE DOO

I'll admit it, I've been writing tech tips for three years and I'm running thin on new interesting topics that aren't too esoteric. In the attempt to elaborate tech topics, I've even stretched my vocabulary to include the mind numbing word “circumlocution,” Which, by the way, created quite a debate among the staff at Bikernet, who were insistent on switching my high school vocabulary word to “jabbering”. Somehow I got my way, and they ran with my original choice of wording. Proof that if you stick to your guns, literary convictions, and utilize your myriad of Scottsdale Public School vocabulary words, you've got word-power.

Raise your hand, if he's fulla shit.–Bandit

So in this installment, I'm writing a tech tip about properly folding doo-rags, so they won't blow off your head at 80 mph. Believe it or not, this is a safety concern. Have you ever been riding next to a guy when all of a sudden he starts to swerve, grabs for his head with his left hand, and then swoosh, his noggin is exposed, out in the breeze? It's not a handsome site, and can also be downright dangerous. I've witnessed one of these “free-breezers”, screech to a halt, dead in the middle of an interstate, and flip a U-turn in an attempt to recover his five-dollar, pre-fabricated hair holder. So in the truest form of safety education, and cost effectiveness, I'll enlighten you, through the medium of text and photos, in a precise technique, for folding a ninety-nine cent bandana, into a safe piece of motorcycle road-wear.

step one for badana head

Step one:
Scrape up less than a dollar of change out of your car's ashtray and buy a regular-old square bandana. They're readily available in a multitude of stores all over the goddamn place, not just at your corner motorcycle shop. The standard bandana is a multi-use item, when not secured to your head.

One standard size 100% Cotton bandana will fit just about every size skull, sans Herman Muenster. The one-size-fits-all store bought pre-formed skullcap approach isn't personal enough for me. I like the custom aspect of tailoring the square swath of fabric to my own liking, plus you won't get caught wearing the same iron-cross flaming doo-rag that 30 other dudes wore at the rally.

step 2 for bandana head

Step two:
Pick a corner and fold it over. Here's the secret key of the experienced doo-rag wearer; if you have a big head only fold a small amount over. Don't fold it in half or you won't have enough left on the ends to tie it securely in the back. If you have a tiny head, fold it in half. Medium size head, somewhere about three-quarters of the mid-line will get you in the zone. If you want to look really cool, fold the one corner over that has the label printed on it, then the unwanted part of the design will be hidden under the fold when it's installed properly.

step 3 for bandana head

Step three:
This is a one-man operation. No bones about it. It just looks silly in public to have another man tie your bandana, so practice this move before you step into public. Your mama stopped tying your shoes before you went to kindergarten, so you shouldn't need your wife or girlfriend to tie your bandana for the road either.

Face into the wind, tip your head forward and place the folded portion of the rag onto your forehead. With the two outer tips in your left and right hand, tuck the center top tip down over your head with both hands while still maintaining a grip on the corners. This takes some practice, but it's an acquirable skill that's worth its weight in gold. With less than a dozen practice attempts in front of a mirror, I promise, you'll have the skills needed to perform this task blindfolded.

step 4 for bandana head

Step four:
This is the most critical step to maintaining a firm rag-to-head fitment. Make sure that the leading edge of your bandana is low on your brow, not all high on your head like Aunt Jemima. If you don't tie the bandana low on your forehead it's surely guaranteed to catch some wind and you'll be out your 99 cents.

At this juncture, you should still have your two hands holding the tips of the outside corners, and the third corner is tucked underneath the two ends as you tie a double knot. The first knot needs to feel extra tight on your head. By the time you get the second half of the knot tied again it's going to be looser.

step 5 for bandana head

Now you've got the inside doo-rag tech. Whatever you do, don't go chasing after it, if by chance, it does blow off. If you're not secure in your tying skills, bring a second bandana along in your back pocket. You can buy at least 5 bandanas for the price of one pre-made poser rag. So just remember, practice makes perfect.

step 6 for bandana head

As you can tell, I've just about run dry with new topics. Check out http://www.musclebikes.com and go to the tech-tips section to see the archived Rumble Tech-Tips that range from batteries, tires, ignitions, fuel, brakes ad-infinitum. If you can help me out with some new topics for these tips, please mail them to john@surgicalsteeds.com. Who knows, maybe you'll see your personal motorcycle technical bewilderments become crystal-clear in my next installment of Bikernet Tech Tips.

finished look bandanna

Keep the rubber side down,
John at Steeds
http://www.musclebikes.com

Please follow and like us:
Pin Share
Scroll to Top