The Klock Werks NavBag is a multifunctional windshield bag made for Street Glides, Electra Glides and Trike models. The innovative bag features a slick magnetic closure and a special compartment that securely displays your GPS, cell phone, MP3 player or other device behind a protective screen. The screen is capable of transmitting the electrostatic energy necessary to operate most touch-screen devices. It also has a soft felt bag that will not scratch the windshield. It also contains dual accessory cable ports and room for other personal items.
Tammy has done her fair share of maintenance and repairs so installing the Klock Werks Nav Bag on her trike was not going to be a problem. She has learned much over the years. Even if the job looked easy, read the instructions and in this case it prompted a phone call to me asking if she could come by and use my inch-pounds torque wrench.
Using a number 27 Torex bit, the screws holding the windshield in place were removed. Note: The windscreen was completely removed for photo purposes. According to the Klock Werks instructions only the one center Torx need to be removed and the two end fasteners loosened.
Install the NavBag between the inner fairing and the windshield. Tammy installed the center screw first. NOTE: It Is Very Important To Not Over Tighten These Screws. If you do, the brass insert molded into the fiberglass inner fairing will spin, and you will not be able to tighten properly.
Using a ¼ inch drive inch pounds torque wrench Tammy tightened the center screw to 20 inch lbs. and then the two outside ones. Following the same sequence she increased the torque to the required 25 inch lbs.
At this time she does not have a GPS but her cell phone. Glasses and whatever have found a new home and she loves it. As soon as she scores a GPS, we will bring you a report and a product review.
–Rogue
