General Posts

We often get calls for basic wiring diagrams. Here's one that was taken from an old Easyriders and expanded by the wizards of Hard Core Chopper Magazine in Japan. Take your time. Keep those copper strands away from sharp edges, moving stuff (like chains) and hot items. Cover everything with shrink wrap. Use extra layers […]

I was making a couple seat pans a few days ago, so I thought, what the hell, I'll share 'em with you. This is the first part, since there's some work left. I'll finish soon, so you won't have to wait too long.There's lot's of people who make their own seat pans. A lot are

I have been riding Harleys for 25 years with your basic hand-clutch and foot-shifter. Now due to all the bikes featured in the HORSE and a really clean bracket that Lucky Devil Metal Works created in Houston, I decided it was time for R.F.R. to move into the world of suicide clutches and jockey shifters.

This tech is really, really simple, but as everything else in life, we just try to make things easier on ourselves and this will solve a big pain in the ass. Yes, I'm talking about the clips that hold the pipe flanges. I'm sure the devil had a pretty good agenda when he decided to

I've learned a lot about building handmade exhaust systems for the last couple of months. I flat screwed up the first tech on tools, but returned to Home Depot, found the correct parts and went back to work. I picked up a couple of 4-inch C-clamps, and the proper diameter goofball plumbing clamp. I'm still

The stock tranny linkage cut to work as our brake linkage. A week ago I worked on the brake controls with some success. After fabricating a mastercylinder bracket and actually drilling the holes in the proper location, it wouldn’t work. I needed to turn the master cylinder upside down. I called Frank Kaisler to confirm

This is Big Boar's custom battery of choice. It's capable of providing 350 Cold Cranking Amps in a relatively small package. The coolest bikes have always been the stripped down. Whether stock or custom, the less crap the better. So long as the engines weren't too big, or you were running a kick-starter, you could

You made up your mind. It wasn’t easy, but you’re ready to pull the trigger and write a check to get a new bike this week. You’ve done a ton of research and soul-searching to decide on exactly what kind of motorcycle you want to buy. First you thought you wanted to buy a Harley,

Routing the oil lines from the oil tank to the engine is simple task. There are only three oil lines needed to make your bike run: the feed from the oil tank to the oil pump which is located on the engine, the return line from the engine to the oil tank, and the breather

Helluva weekend. Anytime there's lots of motorcycle carnage,sex, whiskey and writing, I'm all for it. Maybe it's Valentines Daycreeping up. Make a note. Here's the deal on the Sturgis Shovelhead. Sincethe engine was in and mounted I went to work on the exhaust system,then seat mounting, position and played with the bars. I made a