General Posts

Brembo has a solid worldwide reputation, and I ran into a hot looking Brembo representative at an illustrious bike function and decide I’d give them a try. They’re hot and ready to rock. The only items I needed were the locking nuts for the back of the rotors bolts and the springer axle spacer. This […]

Here we go. I’m relunctantly behind the eight ball, or more likely the 5-Ball in this case. The bike is nearly complete and I haven't caught up with the articles. For the most part I was working at Primedia on the bike mags and didn’t have time to breath. No fucking lame excuses. Let’s hit

Having the right tool makes all the difference. No matter what job you plan, the first question is do I have the knowledge and experience to handle it myself, or even with the help of friends? The second, do I have the tools? If the answer is yes, you are good to go. Some people

It's all about choice, and these days we have more to choose from than ever before.Some truly talented people are creating original, mind blowing frame products. Aaron Green's Softrigid, Roger Goldammer's BTR3 frame that's now available in a production rigid (cheers from #4)and Maximum Metal works are just a few that really stand out in

This is how you can finish a seat using one of my PANS FOR LIFE pans (PFL) First Thing is to cut the center out to fit the inner edge of a PFL pan. Tracing:Next step is to lay the leather on the PFL and tape it in place. Next step is to trace the

Built and photographed by Cyril Huze. One of the Ten Commandments of custom bike building is “Keep it Clean,” an overall philosophy that also figures into the design concept that greatness is in the details. Another commandment is “Keep it Functional.” Both concepts are well apparent in the internal handlebar controls offered by Custom Cycle

This is the Big One, my first tech tip on Bikernet. In the process we got to add more chrome to Bandit’s Road King, that he’s worked so hard to blackout. This product was so straight forword, I’ll just jump into what you need to get the job done. Dish Soap Needle Nose Pliers 13/32

Click to see morefrom Lucky Devil Pay attention, guys.Recently we received the following letter and immediately followed up. “We have developed a Gerotor oil pump that bolts right onto evolution engines,” Bret Barker said, “to give them twin cam style oiling. We have just run it on our test bench atthe shop. We are getting

The Halibrand Special by Conder CustomIt started life as a 2006 Softail Springer with the 200mm back tire, provided by House of Thunder Harley-Davidson in Morgan Hill CA. Outfitted with the first set of Conder/Halibrand Hot Rod wheel adapter hubs and Halibrand Sprint wheels.17×6 rear and 17×5 front, chevy bolt pattern. Sheetmetal, bracketry, overall modification,

Just before rolling out and leaving for Sturgis I check my plugs in the only stock item left on the 93-inch House of Horsepower/S&S hot rod Shovelhead—the early heads. Unfortunately every time I attempted to unscrew the short reach plugs the threads and heli-coil came with them. I rode to Sturgis without ever checking the