General Posts

The photography in this tech sucks, so I thought I’d start it off with a bang from RFR, a hot Texas photog.In the fall of 2004 I semi-retired from racing drag bikes and needed a two-wheeled fix. I found a sweet ‘80 Shovelhead rigid on an EBAY ad but was beat out of it by […]

You guys know that the ol' TBear is always on the look out for fresh young talent. I like up and coming craftsmen who haven't yet been corrupted by the glamour of the Discovery Channel or the high dollar bling-bling that festoons every bike lined up at Stoogis. Just regular guys, who do what they

Our finished wheels, after lacing, with the “new” powder coated rims. Note the nice finish on the powder coating. Editor’s Note: Here’s another tech from the expert tech books publishing empire of the Wolfgang. The following, Chapter 4, tech about lacing bobber powder-coated wheels came directly from the Publisher’s new book, “How To Hop Up

Here's a rare shot of the house where the Devil was born in Transylvania. Today we’re hanging out at Lucky Devil Metalworks in Houston, Texas where the Devil, Kent Weeks, is chopping a stock Harley-Davidson Dyna. To add the necessary heft to the rear of this custom, the D is using Big Boar Products’ new

Editor’s Note: We are going to work with S&S, Baker, BDL, Compu-Fire and other Bikernet Sponsors, on their most asked tech questions. We’ll try to deliver the info you need access to. The following came from Howard Kelly, the former editor of HOT BIKE, and now an S&S tech editor. “We take tech calls all

Some of the shots in this article are soft or slightly out of focus. So we decided to kick it of with a soft shot to set the stage. Hope you can dig it.My current build uses a Hushboy’s Infusion frame with a concealed Lockstop, internal forkstop arrangement. Photo 1Looking at the front end it

How to: Build An Old Skool BobberOld Skool is kool. A fact celebrated by Wolfgang Publications in their new book. No theme bikes here, learn how to build a real American motorcycle based on a Panhead, Shovelhead or Evo engine. Don’t buy expensive new parts, build your own bobber or chopper from mix-and-match swap-meet parts.Written

I wanted to increase the performance on my 2004 Harley Electra Glide, so that when I was running on the highway, I had the power to pass other vehicles quickly. Also I needed the ability to run 120 MPH whenever I wanted, for as long as I wanted. I also wanted to keep it dependable.

If you live anywhere near Houston, you need to make a pact with The Devil to gain access to one of the best custom shops around, namely Lucky Devil Metal Works. After you fork over your soul, Mr. Devil will grant your wishes. That’s why our friend Manny was happy to get a call from

Soldering, and being able to make up a neat jumper wire, are necessary skills for anyone building a bike. After stripping off the insulation the first step is a dip in some non-acid flux. Next, slide a small piece of shrink wrap onto the wire, followed by the connector. Using a good crimp tool, crimp