Free Departments

This is strange. I’m writing several Sturgis Chop Techs after I returned from Sturgis. I’ll try to remedy that in the future, but we were so damn busy trying to complete the bike and run Bikernet, we didn’t keep up on the techs. Many apologies.This piece covers the installation of the hot Speedster cap from […]

The first thing that pops into my head is Dave Mann’s “Ghost Cowboy” and then Berry Wardlaw dressed as a cowboy. What does that have to do with an article about the hottest engine to hit the motorcycle industry this year? Well hang on and you’ll see. Berry Wardlaw, of Accurate Engineering in Dothan Alabama,

This is one of Bob Le Pera's original Banana seats from the early '70s. He still makes them today. If you check out the spec sheets for custom bikes in about any mag, and you come upon the seat section, chances are you’ll find Le Pera listed as the manufacturer. Motorcycle seat = Le Pera,

Click to see morefrom Lucky Devil The old pipe to oil tank tab.My first move began with a correction. I removed the exhaust pipe tab welded to the oil bag. The oilcan is rubber mounted, the exhaust pipe generated severe heat and the pipe system needs to be solidly mounted. It had to go. Actually

Brembo has a solid worldwide reputation, and I ran into a hot looking Brembo representative at an illustrious bike function and decide I’d give them a try. They’re hot and ready to rock. The only items I needed were the locking nuts for the back of the rotors bolts and the springer axle spacer. This

Here we go. I’m relunctantly behind the eight ball, or more likely the 5-Ball in this case. The bike is nearly complete and I haven't caught up with the articles. For the most part I was working at Primedia on the bike mags and didn’t have time to breath. No fucking lame excuses. Let’s hit

Having the right tool makes all the difference. No matter what job you plan, the first question is do I have the knowledge and experience to handle it myself, or even with the help of friends? The second, do I have the tools? If the answer is yes, you are good to go. Some people

It's all about choice, and these days we have more to choose from than ever before.Some truly talented people are creating original, mind blowing frame products. Aaron Green's Softrigid, Roger Goldammer's BTR3 frame that's now available in a production rigid (cheers from #4)and Maximum Metal works are just a few that really stand out in

This is how you can finish a seat using one of my PANS FOR LIFE pans (PFL) First Thing is to cut the center out to fit the inner edge of a PFL pan. Tracing:Next step is to lay the leather on the PFL and tape it in place. Next step is to trace the

Built and photographed by Cyril Huze. One of the Ten Commandments of custom bike building is “Keep it Clean,” an overall philosophy that also figures into the design concept that greatness is in the details. Another commandment is “Keep it Functional.” Both concepts are well apparent in the internal handlebar controls offered by Custom Cycle