Tech

Here's our test subject, a 2010 dresser belonging to a Departure Bike Works Customer.We keep up on exhaust systems. The damn things are forced to change as fast as new models are released. D&D runs dyno tests on every exhaust system they make, plus they have developed new, better flowing touring bike mufflers, so when […]

This is a strange one. In this economy, suddenly Sportsters became the answer for wild years of partying on two wheels without any major expense. For a decade, it didn't make financial sense to customize or ever buy a Sportster. Big twins were moneymakers, whereas Sportsters cost the same to modify, but the resale price

Bert Baker, the mad scientist behind the Baker product line.The Baker team understands the love affair with your vintage motorcycle… There’s nothing like putting authentic, vintage styled components on your nostalgic bike. That’s why BAKER has taken the time to reinvent the 4-Speed. “Some people don't give a smooth fart about any Big Twins after

The 2007-2009 Sportsters have the ECM module mounted on the rear fender. This does not lend itself to a clean solo seat option. Seat styles for these year bikes have a “hump” in them to allow for a compartment to hide the module. I have been looking for a way to move the ECM to

We are currently working on the good Dr. Hamster's '34 VL, which, for some unknown reason has a set of mid '40s Indian handlebars mounted on dogbones, attached to his VL springer front end, with dogbone risers. It's a strange arrangement, but we decided to stick with it. We checked out the bike from stem

Editor’s Note: We are going to work with S&S, Baker, BDL, Compu-Fire and other Bikernet Sponsors, on their most asked tech questions. We’ll try to deliver the info you need access to. The following came from Howard Kelly, the former editor of HOT BIKE, and now an S&S tech editor. “We take tech calls all

  The Sturgis Shovel has seen its share of LA Harbor town back alleys in the eight years of pounding the streets around Wilmington, California. The exhaust is really starting to show the effects of the road and weather. Originally these hand fabricated pipes were painted with barbeque paint found lying around the Bikernet Intergalactic

Shrunken FXR mid-controls by Giggie at Compu-Fire. Note: we need flat-headed Allens. Giggie our master machinist from Compu-Fire rolled up to the Bikernet Headquarters last Saturday. We haven’t seen him for months due in part to his work on new starting systems for the custom market. They are dancing through the final development stages of

Stuffing a big twin into a VL frame dates back to the days when the Knucklehead was a brand new, modern OHV engine, 1936. There were a lot of advantages to a conversion like this. VL frames were good for a 25 pound frame-weight reduction, versus its Knuck counterpart. The shallower VL rake made for

The key to this warlord modification is aWWI TRENCH KNIFE, original about $200 plus. Bob T., being a knife collector, has a goddamn box full of of them. Next ya need a RoadRat, Roberts kick pedal rod (it's longer than stock). He machines them from 304 stainless. (Road Rat Robrrts E-mail is RoadRatRoberts@webtv.net) Stem from