There’s a wild air cleaner from Paul Cox. I’m going to say, and I might be off base, that most carbs are rebuilt for a couple of reasons: either they sat too long, sucked bad gas, or ran without an air cleaner too long. I would venture to guess that most carbs on custom bikes […]
Rebuilding The S&S Shorty Series Carbs Read More »
We’d like to say that it’s all work and no play for the IronWorkers crew at Sturgis, but truth be told, we managed to work in some biking fun. We also asked Dar Holdsworth of Brass Balls Bobbers if he’d display the IronWorks/Bikernet.com/Brass Balls Bobber, giveaway bike (or dare we say, your bike) at the
Part 3: IronWorks/Bikernet.com/Brass Balls Bobber Giveaway Bike Read More »
If you’re using the Harley-Davidson Oil Cooler Kit part number 26082-05 you will also have to purchase a oil filter part number 63798-99. We covered installing another factory/touring oil cooler system in the King reports, but since then some people had problems with the original system and the factory developed this upgrade. That’s why we’re
Touring Model Oil Cooler Installation Read More »
Click Here To Be A Sponsor I spoke to an official, Tom “Rodan” Evans, from the SCTA (Southern California Timing Association) about rules, classes and Bonneville racing. Delvene reminded me that it was time to pre-register. “Running open bikes is the most fun,” Rodan said. “But let’s look at what you have?” According to Rodan
Bikernet Bonneville Effort, Part 11, The Classes Read More »
You can imagine how jazzed I was to receive the 120-inch Accurate Engineering Panhead engine from Yellow Freight. I’m a major fan of Panheads. Hell, I was born in ’48, but don’t tell anyone. Shortly thereafter the Baker Transmission, 6-speed, touring unit with the oil bag under it, arrived. I also discovered that all my
Bikernet Bonneville Effort, Part 10 Read More »
Click Here To Be A Sponsor Plasma cutters are amazing, but let me back up just a taste. I needed to take care of the Devil in Houston at Lucky Devil’s Metal Works and made the brother a belt buckle. He’s going to build the lovely Nyla a Frisco style chopper in the near future—tight
Bikernet Bonneville Effort, Part 7 Read More »
We’ve made serious progress on both bikes, thanks to terrific help from friends around the industry. The buzz is hot for the Bonneville this year. Classic Custom Cycle Engineering dogbone risers.I may jump around a bit, but let’s haul ass into my first move. With the 45 frame aligned by U.S. Choppers, Rick Krost, the
Bikernet Bonneville 2006 Effort, Part 6 Read More »
In the last segment the crew of U.S. Choppers straightened the Bonne Belle, 1940 45 frame, but I asked Rick Krost, da boss, if he felt any gusseting was necessary. He pointed out all the strong factory gusseting in the front and even on the single down tube, but suggested that we gusset the rear
Bikernet Bonneville 2006 Effort Part 4 Read More »
We’re rockin’ with this project. I’ve never built two bikes at once, Bonneville aside, but we’re having a blast. Both projects are hustling and this report will bring you up to date. The CCI V-Bike Panhead is still a roller and we’re waiting on the drive-line elements so we can mock-up the pipes before shipping
Bikernet Bonneville Effort Part 3 Read More »
