Bikernet Banner

January 11, 2007 Part 3

BIKERNET NEWS SPECIAL REPORTS–60TH HOLLISTER LOGO, VINTAGE BAGS, FASTENER TIP OF THE WEEK, RALLY STAGING, MASS MMA POLITICAL AGENDA, NEW ENGINE FROM S&S, UFO ABDUCTION–NOT KIDDING, MENTAL HEALTH-KIDDING, DVD DEAL, ARIEL RESTORATION AND PRUGH OPENS SHOP

Continued From Page 2

hollister_Logo use

HOLLISTER’S 60TH LOGO– 60 is old but Hollister’s 60th has a brand new look. The new Hollister Motorcycle Rally committee commissioned local Hollister Resident Jim Wood at Sage Blanc Inc. to design a brand new logo for the next 60 years July 6th 7th and 8th. With the help and input of motorcycle industry icons like Mike Corbin, the finished logo is awesome!

“This is going to be everywhere” stated Seth Doulton of Horse Power Promotions. Horse Power Promotions has the job of promoting and producing this years rally.

“We have already licensed it to company’s for sunglasses, seats, helmets,wheels and we are working on about a dozen other things right now” Seth said.

To receive a license to use the 60th anniversary Hollister logo to helpMarket your company all year and be the exclusive in your product segment. contact Horse Power Promotions at 805-686-2007 or e-mail sd@silcom.com

Hollisterposter

SUZUKI INFO REQUEST–Read your article on the Suzuki M-109R. Don’t know if you’re Paul Garson, however since I noticed DIST plates on the bike perhaps you might be more alert to used bikes, particularly the silver (not available for 2006) or second choice black on sale in SoCal?

Any alerts or recs to find the bike would be appreciated.

–E Suzuki
v3dman@hotmail.com>

WFIWITH ANTHONY

GRAB WORLD’S FASTEST INDIAN DVD ON OVERSTOCK SALE FROM WHITEHORSE PRESS–World’s Fastest Indian DVD & Poster
Originally $29.99
Now Just $25.00

This is the hit movie starring Anthony Hopkins that every motorcyclist wants to own. Order your copy in the next two weeks and save 20%. You can still receive a FREE original movie poster with your order as long as supplies are available.

prugh logo

PRUGH DESIGNS NOW OPEN–Michael Prugh, best known for his attention to detail and his industry changing chassis designs, has opened Prugh Design. Two-time runner-up in the AMD World Championship and seen on Discovery’s Biker Build-Off, Michael has been an inspiration to the world of two-wheeled machines.

Prugh Design’s primary aim is to support all companies, independent of size, in the design development process. Offering advanced motorcycle concept design and development from conceptual sketching to project management.Michael also plans to keep his flawless, ever original bikes coming off the lifts and look for a new line of Prugh Design parts coming soon!

T 605.718.7521
www.prughdesign.com

prugh

REQUESTS FLOODING IN FOR JJ’S FIRST BOOK–It’s a biker novel like no other, a classic, soon to be made into a television commercial.

Holy shit, you’re still at it. did you mention thispiece of shit product of mine on your site orsomething?….or is it just word of mouth stuff toyour pals that they’re gettin’ back to you about. imean, i appreciate the interest yer generatin’ but idont want to piss these bastards off either makin’ ’emfrustrated. i want to piss everyone in the world offEXCEPT bikers. especially the thug type bikers YOUhang out with. so calm these fine people down. tell’em it’s kind of like Halo 3: it’s comin’; and thatyou’ll be happy to provide full details just as soon asthat fuck solari tells you. unless you can think ofsomething better. and by that i dont mean “hey, here’shis address, go ask him yourself.” over and above allthis, it’s nice that you’re lettin’ me know at leasttwo people want the thing. even though yer makin’ me awreck by it.

–J.J. Solari
jcatsec8@yahoo.com

da ariel motor

THE ARIEL RESTORATION SAGA–I was in love you see…..

Years later…..almost there. Been saying that for too long now but I’m hopingto have it together and ride from Santa Cruz to Halfmoon Bay this May forthe second Legend of the Motorcycle concours deelydop. Although the bike’snot concours quality by any stretch of the imagination, I’d sure love to see itsitting in the parking lot with full saddlebags, a bedroll and oil leaking allover the place.

da ariel bike

The next part of the dream is to get it back home, strip allthe shit off it, put in back on a trailer and haul it to Bonneville to see if I couldbreak into the 50 mph club while watching the serious stuff like your flathead,etc. A man’s gotta have a dream and that’s mine.Burt Munro Lives!

–Dick
dickallen@shaw.ca

sign was his

DOMAIN NAMES FOR SALE–I purchased the following domain names when I was involved in the hotaces project, because I thought they would be valuable in the future. I would like to sell them and was wondering if you know anyone in the online gambling business who might be interested in purchasing them – they are:
HardtailCasino.com
HardtailCasino.net
HardtailCasino.org
HardtailPoker.com

WinnersSecret.com
WinnersSecret.net
WinnersSecret.org

–Sandy Wright
Lyric Marketing & Design
Graphic Design…Marketing…Photography
214-208-3987
2300 Ables Drive
Plano, Texas 75093
sandy@lyricmarketing.com
www.lyricmarketing.com
www.lensqueen.com

sign sharp edges

THE ANNA JAMERSON EXPERIENCES-AN ASTONISHING UFO ABDUCTION CASE– After a lengthy hiatus, the Intruders Foundation (IF) will resume its regular program of seminars with a presentation by Anna Jamerson, one of the authors of CONNECTIONS, in which she will discuss her extraordinary UFO abduction experiences. Anna and her friend Beth Collings met in the late 1980s, and subsequently discovered that they were both undergoing UFO abductions, and that, amazingly, they had been brought together as children in a series of ongoing encounters evidently engineered by the UFO occupants.

Anna Jamerson is a highly intelligent, articulate woman who spoke movingly about her encounters at our second all-day IF conference in 2000 at the New York Hall of Science. On January 27, she will recount what is in many ways perhaps one of the most dramatic and complex series of UFO abductions ever. Her joint abductions with Beth Collings comprise the central section of C.D.B. Bryan’s much acclaimed book, CLOSE ENCOUNTERS OF THE FOURTH KIND, and her talk at IF will be accompanied by a remarkable group of illustrations by her gifted co-writer, Collings.

The events she will detail mostly occurred at a horse farm she owns, but one incident apparently involves an underground alien installation of some sort. Ranking with the Betty and Barney Hill case, the Linda Cortile abduction, and the 1975 Travis Walton incident, Anna Jamerson’s account is of the utmost importance to the history of the UFO abduction phenomenon. Her book, CONNECTIONS, is one that should be in the library for anyone interested in the subject, and will be available for sale at the seminar.

The seminar will be held on January 27th at the new meeting rooms of A.R.E., located on the SECOND FLOOR at 241 W. 30th Street (between Seventh and Eighth Avenues), New York, NY. The price of the seminar is $30 for non-members and $20 for members of IF, seniors and students. Reservations must be made by telephone at 212-645-5278, and will be filled on a first come, first served basis. Payment must be made in advance to secure the reservation. Make checks payable to the Intruders Foundation, P.O. Box 30233, New York, NY 10011. Seating is limited. Book early! Only 60 reservations will be accepted!

pomona brown bike
This is one of the Pomona winners who we hope to feature after ER does.

NATIONAL MENTAL HEALTH CARE WEEK– This coming week is National Mental HealthCare week. You can do your part by remembering to contact at least one unstable person to show you care.

Well, my job is done!

–Joseph Franks
sarge-vet@cfl.rr.com

x-wedge black12

S&S NEXT GENERATION V-TWIN-X-WEDGE!–With EPA and CARB restrictions becoming more and more prevalent, S&S Cycle looked to the future and designed a new OE specific engine more in line with environmental expectations. This next generation v-twin is a departure from S&S’ traditional engine design and a step toward the future of air-cooled, pushrod operated v-twins.

In October of 2002, a small group of S&S Product Development team members were given a green light by the S&S senior management team to start on a new engine design to ensure that S&S OE customers would have engines available when the emissions laws tightened up. It needed to be an air-cooled v-twin, with pushrod operated overhead valves and meet the upcoming 2008 ARB and 2010 EPA regulations. The S&S Product Development team accepted the challenge and began engineering the engine of the future.

By October of 2003 the first prototype design was under way and a running test version spent time on the S&S dyno in December of 2004. So, in just two years a concept became a design, which turned into a running prototype. In just five more short months, April 2005 saw another prototype installed in a chassis and ridden around Wisconsin. When the prototype had reached production intent, two different dyno tests were performed-one to simulate highway operation at 3200rpm for 800 hours and another that ran a 200-hour duty cycle on a dyno that varied engine speed and load from idle to full-throttle. This rigorous testing was necessary before any further development could be done. Once the S&S Product Development team was satisfied with the engine’s durability, they finalized the functional design.

x-wedge polished

The engine, code-named Fred around the S&S offices during development, is the all-new S&S X-Wedge (pronounced “cross” or “ex”)-a 56-degree, closed-loop fuel-injected, three-cam, overhead valve v-twin designed to deliver the performance expected of an S&S engine, but still comply with EPA laws. One key engineering feature is the versatility of the design to create a range of engine sizes. Included are specifications or the 117ci X-Wedge to be released later this year, but in the future bore and stroke sizes can be maximized to create a 139ci engine. The 56-degree v-twin utilizes three serpentine belt-driven, large base-circle cams; two exhaust cams and a common intake cam achieve almost straight pushrod angles that combine with automotive-style rockers and roller tappets to create an incredibly quiet, EPA noise conscious valve train.

Induction on the X-Wedge is done with the new S&S single-bore throttle body pumping fuel and air into a wedge shaped combustion chamber contained in a head with a five stud bolt pattern and increased fin area for maximum cooling abilities. The head has the fuel injector mounted directly in it for even more efficient combustion. A non-structural rocker cover that will allow various OE builders to design a look specific to their brand covers the aforementioned automotive rockers.

The cylinders use the five-bolt pattern, have no oil return holes and are common design for front or rear placement. Their round shape reduces bore distortion and computer designed progressive fin spacing increase the cylinders cooling capabilities. The cylinders are die-cast over the most aggressive liner seen in the industry to ensure heat transfer and permanent adhesion between the cast iron liners and the aluminum surrounding them.

Naturally, case design improvements were implemented including beefier engine mounts, single oil pump sump location and integral tappet blocks and common front and rear tappet covers. The case holds a massive one-piece forged crank that uses automotive plain style main and rod bearings. By increasing the crankshaft mass, additional strength is found and vibration reduction is achieved, even when the stroke is pushed out to 4 3/8″. The X-Wedge will not fit in a standard frame. Specific engine mounts are required, but it will match up to the common primary and transmission designs currently on the market so OE manufacturers will not have to re-engineer the driveline to utilize the technology X-Wedge offers.

There has been much speculation about the new S&S X-Wedge engine, and we are proud to finally present the details of this groundbreaking product.

Bore (range) = 4.125″
Stroke (range) = 4.375″
Displacement (range) = 117 CID
Cylinder head design = 2 valve Cross Wedge
Valve sizes = 2.0″ Intake and 1.6″ Exhaust
Pistons = Forged with no notching, common front to rear, .927″ wrist pin diameter
V angle = 56.25 degrees
Cam Drive = Gates 30 mm wide system with automatic tensioner
Valvetrain = Hydraulic roller tappet with pushrods
Rocker arm ratio = 1.7:1
Crankshaft = Forged one piece
Rod type = 7.400″ forged split design with 7/16″ bolts
Bearing Type = Tri metal plain style rod and main
Main bearing journal dia.= 2.36″
Rod bearing journal dia. = 2.20″
Oil system = Dry sump with internal gerotor pump
Induction and Engine Management = 2-1/16″ throttle body with S&S closed loop VFI
Fuel injectors = 34.8 lb/hr @ 3 bar fuel pressure
Complete engine weight = 163 lbs
Crank and rod assembly weight = 42.75 lbs
4 bolt engine mount system using 7/16″ fasteners
Compression ratio = 9.75:1

s&s banner

MMA MASSECHUSETTS INITIAL LEGISLATIVE AGENDA FOR 2007– 1) to allow motorcycle insurance ‘choice’ for motorcycle owners to shop forinsurance rather than be restricted to the current ‘fix and establish’system;

2) to dully fund the Commonwealth’s Motorcycle Safety Program,increasing thecontribution from $2.00 to $5.00. Increased revenues would be used tosubsidize the Beginner Rider Course for riders under 21, allowing acredit of up to$150.00 off the course fee. This bill will be known as ‘Danny’s Bill’,in memory of Danny Woods, 20, of Saugus, who was killed in August 2006

3) to assess insurers 5% of their profit from earned motorcyclepremiums togo to additional motorcycle awareness programs to reduce accidents andinjuries

4) to reduce motorcycle tolls to 50% of private passenger car rates,based ontolls being collected on the basis of roadway wear and tear;

5) to allow helmet choice for those 21 and older;

6) the re-filing our ‘motorcyclists matter’ bill, to increase civil andcriminal penalties of those drivers who drive criminally reckless orOUI, violatingthe right of way of ANY road user, resulting in serious bodily injury ordeath

7) an off-road trails maintenance bill, as proposed by the New EnglandTrailRiders Association;

8) that no banning of motorcycles on any public way that receives local,state or federal funding for its construction or maintenance be allowed;

9) an off-road trails bill for education, enforcement and season long usageof public parks; (as proposed by the New England Trail Riders Assocation);

10) the re-filing of SB 1344, as enacted by the Senate in 2/2006. SB 1344: AN ACT RELATIVE TO STANDARDS FOR PROTECTIVE HEADGEAR FOR OPERATORSOR PASSENGERS ON MOTORCYCLES: Be it enacted by the Senate and House of Representatives inGeneral Court assembled, and by the authority of the same, as follows: SECTION 1.Section 7 of Chapter 90 of the General Laws, as appearing in the 1994Official Edition, is hereby amended by striking out all beginning withthe word ?Every? and ending with the word:- gear.

SECTION 2.Every person operating a motorcycle or riding as a passenger or in asidecarattached to a motorcycle who is under 21 years of age must wear protectiveheadgear conforming with the such minimum standards and construction asprescribed by the Registrar, and no person operating a motorcycle shallpermit anyother person under twenty-one years of age to ride as a passenger on suchmotorcycle or in a sidecar attached to a motorcycle unless such personis wearingprotective headgear as prescribed by the Registrar.

The Committee also directed the MMA’s legislative director to submit agrantapplication for motorcycle safety and awareness funds to the MassachusettsAuto Insurers Bureau, to aid in reducing accidents and injuries for 2007.Riders and motorcycle businesses are encouraged to submit their ideas forbills to Paul W. Cote, MMA Director of Government Relations(claimscote@aol.com), for consideration in the upcoming 2007-2008 season.

racer

STAGING INSTRUCTIONS FOR COLORADO FREEDOM RIDE–American Freedom Riders – January 13 staging instructionsFinally we have the schedule and the staging details worked out for the ride to the federal courthouse on Saturday, January 13th.

This event was organized on short notice and getting permisson from the federal authorities in El Paso for Agent Ramos to attend took some doing. Our special thanks to Colorado Congressman Tom Tancredo for his helping hand in this matter. The good news is that Nacho Ramos will be riding to the event with us.

We will stage at Denny’s Restaurant on Bell Road in the first block west of I-17 at 10:00 am. We will be there for a period of time organizing into ride groups and preparing for a grand entry into the downtown event. Agent Ramos is riding with us and we will make our arrival to the protest very dramatic for the press coverage.

If you are coming from the south and can’t get up to the staging area, go directly to the federal building where you will be given instructions on where to park. These riders will go out to meet and join the main group so everyone makes the grand entrance together. Please do your best to go to the staging area as it will make things go much smoother.

Any of you who have not yet ridden with us – now is the time. We need to show the Justice department that these agents are supported by legal American citizens.

Indian ad

LOOKING FOR VINTAGE H-D SADDLEBAGS–Any customers/ friends want oem vintage 1948-54 FL leather saddlebags? They could make the difference in the “most original” catergory.The ebay Item number: 200065083890

DMP fasterners banner

THE FASTENER TIP OF THE WEEK–I thought I would first start on discussing different head markings on bolts and what they mean.What does those slashes and numbers generally mean on a hex bolt? It very simple, generally speaking on a clear zinc plated bolt you will notice 3 hash markings on the head this represents grade 5 which carries a tensile strength of 120,000 psi. A gold color zinc plated bolt has 6 hash markings on the head. This represents grade 8 which carry a tensile strength of 150,000 psi. Is their a stronger bolt than grade eight? Yes there is a F-911 hex bolts and 12-point flange bolts that are rated between 180,000 & 190,000 psi tensile strength.

Now to really screw things up for all of us who have Harley Davidson’s, the V-rod has many metric fasteners. If you have ever looked a metric hex bolt you might notice the markings 8.8, 10.9 or 12.9 this does not mean grade 8,10 or 12. The grade 8.8 refers to the tensile strength which is generally 116,000 psi, grade 10.9 is generally 150,000 and grade 12.9 is generally 175,000 psi.

Now what about stainless steel bolts? Well 18-8 stainless is great for corrosion resistance and polishes up to a brilliant finish but is not extremely strong. Generally speaking most of the stainless fasteners are 18-8 and carry a 100,000 tensile strength. Do they make a stronger tensile strength stainless? Yes, and the answer is ARP or Automotive Racing Products has stainless fasteners rated at 170,000 psi tensile strength .

Part 2 of this article will be on plating of fasteners and what to look out for when trying to do it yourself. Derek

–Stankovich @DMP Fasteners.com
All questions and feedback can be sent to wegotum@sbcglobal.net
or 1 888 MR BOLTS.

crazyhorse banner

Continued On Page 4

Read More

January 11, 2007 Part 2

BIKERNET NEWS ALERTS–METRIC THUNDER SELLS VANCE AND HINES, STEALTH IN TRAINING, HELMET LAW FIGHTS, WIN TICKETS TO ARLEN NESS SHOW, PRODUCT OF THE YEAR FROM IRON WORKS, AUSTRALIAN SEAT, TWO-WHEELERS BABE, TWIN CAM CAM GEAR SETS, MAGAZINE SHAKE-UP, BUNGKING BUNGS AND BEST MAG COVERS IN THE WORLD

Continued From Page 1

vh-21

METRIC THUNDER HAS VANCE & HINES BIG SHOTS IN STOCK– Metric Thunder delivers the latest 2007 Harley-Davidson exhaust pipe technology from Vance and Hines. These Big Shots Staggered pipes feature the Power Chamber design, …

Read More

January 11, 2007 Part 1

BIKERNET NEWS FLASH — 360-HUB DOING GOOD, EASYRIDERS PORTLAND AND COWGIRLS, HEY, LOOK AT TECH DREW FROM THE SALT, TOYOTA DUI SENSORS, WEST COAST CHOPPERS DEALER INCENTIVE PROGRAM, CHOPPER CHICKS BREAST CANCER AWARENESS BIKE, WOMEN RIDERS NOW LIFESTYLE VIDEO ONLINE, WHAT IS THAT? AND GYPSIES BBO BIKE FOR SALE.

brass balls cuty front
Girl and bike from the Brass Balls Bobber gang.

Hey,

It’s a new year, new biz, new thoughts and new goals. I’m twisted today, there’s so much going on. We’re rocking with Bikernet’s growth and over a half dozen new sponsors. We truly appreciate the support and recognition. We’re fabricating our Bonneville Frame at U.S. Choppers right now and we’re about to feature another U.S. Chopper Board Track Knucklehead. It’s cool.

I’m going to bring up something reluctantly, but it needs to surface. Have you seen Inconvenient Truth, a documentary by Al Gore on Global Warming and our future on earth. We’re fucked if we don’t do something quick. On the other hand, we can do a couple of things and fix it quick, but it means we change our thinking for the good of mankind. Check it out. Here’s just a tidbit from the movie: In WWII the population of the earth crested 2 billion. Just 60 years later we’re at 6.4 billion and by 2050 we’ll reach over 9.5 billion! We can’t handle that level of population growth. A buddy, who is a doctor, told me, “It we sterilize every woman and man after they have one child we can half the earth’s population in one generation.” Amazing. It’s not just about the EPA, but if we can drive less, get rid of our connection to middle East oil, ride more and work on other fuel sources, we can turn this bullshit around. Let me know what you think? We’re Americans–we can fix anything!

EReventBanner

pomona chica rear
Most innovative product I spotted at the ER Pomona Show. Look closely at Chica’s Softail arrangement on the rigid.

On a lighter note, we hauled two bikes to the Easyriders show in Pomona and came away with some hot notions and new bikes to feature on Bikernet. Check out Chica’s Softail conversion on this Jap bike, but it would work on any rigid. We’ll bring you another report tomorrow from Chris Kallas. I’m trying to deliver a report on each and every show right up to the grand finale in Kansas City, in May. Next is Sacramento this weekend, be there!

Gypsy engine side

HUGH THE CHOPPER KING REPORTING FROM THE BUILD-OFF ROAD– Was in Hartford for NE Motorcycle Expo over weekend. Two very good builders: Greg Westberry and Brian Fuller. Wave of the future.

–Hugh King

Andrewsengine

We will bring you a full report on the Departure Bike Works drag bikes, on it’s way to a race track in Baton Rouge to test their Panhead metal against a Hyabusa drag bike. It’s going to be tough. They’re filming the Drag Race this weekend.

Gypsy engine rear
Gypsy’s bike was amazing. A Classic.

On another Discovery Build-off News front, Gypsy has her Build-off Winning Bike for sale. An amazing creation that includes a Berry Wardlaw, Accurate Engineering Knucklehead engine and exhaust system help from Larry Curik of Lone Star Choppers. This is a fine machine. Contact Berry Wardlaw at Accurate Engineering for more info: accurate@accurate-engineering.com

Accurate banner

Plus, Scott from LeRoy Thompson’s shop won the BBO at the Easyriders Pomona Show this last weekend. Duane Ballard, one of our custom leather seat masters tooled the seat for Stinger Custom Cycles.

baghdad 2

baghdad 1

MYSTERY RIDE IN BAGHDAD–I was in Baghdad a few months ago and came across this ol’ scoot with a side car that some of the contract security guys were using to get from the exchange to their hooch. I couldn’t figure out what in the hell is was though. Got any ideas? Keep up the great work!

Jeremy Ausmus, SSgt, USAF
MNF-I Baghdad

women riders now logo

MOTORCYCLE LIFESTYLE VIDEO LAUNCHES ON THE INTERNET–January 9, 2007 (Livingston, MT) A new Web feature called Motorcycle Lifestyle Video is now available on WomenRidersNow.com covering the lifestyle side of motorcycling. Motorcycle Lifestyle Video encompasses the people, places and things of motorcycling as seen through the eyes of the riders.

“We are showcasing the motorcycling lifestyle and products through the experiences of the people involved,” explains Genevieve Schmitt, president of Women Riders Now, publisher of WomenRidersNow.com. “While we plan to feature all riders, there will be a heavy emphasis on women because they are the fastest growing segment of new riders and our goal is to attract more women to the sport. Plus, we feel who wouldn’t want to watch a woman riding a motorcycle? Both men and women will want to watch the stories we’re featuring.”

Two segments currently featured on Motorcycle Lifestyle Video are “Femmoto,” an all-women’s demo track day held each year in Las Vegas, and “Women’s Motocross,” exploring why so many young women are attracted to riding in the dirt. Future stories will include motorcycle evaluations by experienced female test riders, something not currently seen anywhere on the Web or on television. The video stories are structured with the broadest appeal possible much like a news magazine segment on TV focuses on the human interest element. “Our goal with Motorcycle Lifestyle Video? is to share the motorcycling experience with everyone so those who aren?t currently riding may want to get involved in the sport,” says Schmitt.

To contact Genevieve Schmitt, please call 406.333.4491, or email gschmitt@womenridersnow.com.

Cancer bike

CHOPPER CHICKS CREW TO BUILD CHOPPER IN FRONT OF LIVE AUDIENCE AT DAYTONA BIKE WEEK FOR NATIONAL BREAST CANCER FOUNDATION– January 9, 2007-Daytona, FLA-The Chopper Chicks Crew sponsored by Bikernet.com, a dedicated, all female team of bike builders, will build a chopper and donate it to The National Breast Cancer Foundation during Daytona Bike Week. The International Master Bike Builder Association, an organization of master builders, and Daytona International Speedway will host the Chicks Crew during Daytona Bike Week 2007 on March 8th from 10am-6pm for the build. The bike will be used for fund raising, or any other medium that raises awareness and funding to help the foundation toward its goals. “The Pink Ribbon Chopper” will be the second bike the crew has built for Breast Cancer, but the first for the foundation.

Since the pink ribbon is an international symbol signifying Breast Cancer awareness, the Chopper Chicks Crew decided to use it as the theme for their build. “The Pink Ribbon Chopper,” a long, lean hard tail in white with a pink ribbon painted on the gas tank and a pink rear fender in the shape of a ribbon, will be built in front of a live audience. This exciting event will take place on “Builder’s Row” at Daytona International Speedway, during Daytona Bike Week. The chopper will also have wheels with huge pink ribbons as spokes. The bike will be built using donated parts and labor from a number of major sponsors.

The Chicks Crew consists of Athena Ransom of Vagabond Chopper Co., who has been around motorcycles her entire life and riding since she was seven; Joann Bortles of Crazy Horse Painting, an award winning painter whose work has been featured in magazines such as Easyriders, Ironworks, and American Iron; Jayme Gray from Pussycat Choppers, an avid motorcyclist with a degree from MMI and extensive V-Twin experience; Katie Putnam from Mitch Bergeron’s, another MMI degree holder with tons of mechanical experience; and Sarah Lyon from Magnum Cycles in Kentucky, a creative, self taught mechanic. All five of whom are dedicated to building “The Pink Ribbon Chopper.”

“We decided that it was time for women to make their mark in the motorcycle industry and what better way than to build a bike for a cause that touches almost every woman in some way. We hope to raise awareness of breast cancer as a disease and empower women to realize their dreams.” Said Athena Ransom of Vagabond Choppers.

The NBCF mission is to save lives by increasing awareness of breast cancer through education, and by providing mammograms for those in need. The NBCF works with health care organizations in places like Los Angeles, New York City, and Puerto Rico to provide underserved women with access to information about breast cancer and free mammograms. The founder and president of The NBCF is Janelle Hail, a breast cancer survivor of twenty-five years, who relates to women with compassion, understanding, and inspiration as she conducts public educational programs across the nation. To learn more about the NBCF, visit them online at . www.nationalbreastcancer.org

Every twelve minutes a woman in America dies of breast cancer. This year more than 211,000 women will be diagnosed with breast cancer and 43,000 will die. One in six women either have breast cancer or will develop breast cancer in her lifetime. 1600 men will be diagnosed with breast cancer and 400 will die this year. If detected early, the five-year survival rate is 95%. Mammograms are the best early detection methods, yet 13 million women 40 years of age and older have never had a mammogram. Support The National Breast Cancer Foundation today and give the gift of hope to those in need.

WCC_BANNER2

THE INSIDE REPORT FROM WEST COAST CHOPPERS–WCC offers to our customers a “DEALER” incentive program. The purpose of doing this to promote sales of our products to shops. The terms are simple and the customers don’t need to sign up or apply. At the time of ordering any line item or individual product that is ordered in a quantity of 3 or more will receive a 15% discount on that item. This is not retroactive to orders placed prior to Jan 1 2007. Customers wishing to add to a order that was placed after that date to qualify for this discount will be reviewed by WCC for approval. This discount does not apply to sale items or advertised special offers.

Please visit www.westcoastchoppers.com to view our entire line of products and to sign up for our mailing list to get the heads up on all our news and specials. or you can call 562 983 6666

olddogonbike

BIKERNET FORUM BOARD SUGGESTION BOX–The forum board isn’t archived currently and we’re losing valuable tech material. I started a tech just to archive that heady level of info. So if you run across gems of lifesaving data, pick ’em up and send ’em to Bandit@bikernet.com and I’ll dust ’em off and store them in our tech area. http://www.bikernet.com/garage/PageViewer.asp?PageID=518

sign bar

TOYOTA INSTALLS DUI SENSORS–TOKYO – Toyota Motor Corp. is developing a fail-safe system for cars that detects drunken drivers and automatically shuts the vehicle down if sensors pick up signs of excessive alcohol consumption, a news report said Wednesday.

Cars fitted with the detection system will not start if sweat sensors in the driving wheel detect high levels of alcohol in the driver’s bloodstream, according to a report carried by the mass-circulation daily, Asahi Shimbun.

The system could also kick in if the sensors detect abnormal steering, or if a special camera shows that the driver’s pupils are not in focus. The car is then slowed to a halt, the report said.

The world’s No. 2 automaker hopes to fit cars with the system by the end of 2009, according to the report. Calls to Toyota’s headquarters in Nagoya rang unanswered on Wednesday, a public holiday.

Nissan Motor Co., another Japanese car manufacturer, has already been experimenting with breathalyzer-like devices that could detect if a driver was drunken. Similar technologies, such as alcohol ignition interlocks, are in use in the U.S. and elsewhere.

Concerns over drunken driving have surged in Japan following a series of alcohol-related accidents last year. In August, a drunken driver collided with another vehicle carrying a family of five, plunging them off a bridge and killing three children.

The incident prompted stepped-up roadside spot checks by police, who also plan to stiffen penalties for drunken driving.

drew smiling

BIKERNET AND 5-BALL RACING FOUND ANOTHER BONNEVILLE RACING CONNECTION–My name is Drew Gatewood, and I was the F.I.M. Technical Steward at Bonneville this year.I am the guy in the bib overalls who measured your pan engine.In any case, I found your site on the internet and was looking at all the pictures, and Valerie riding the course.Your group was certainly having a good time, and I kinda wished I was racing instead of working.

’06 was my first time ever to the Bonneville Salt Flats, and I don’t think I’ve ever had more fun.My position as Tech. Steward has already been confirmed for this year (and hopefully many more),and I’m already chomping at the bit to get back.

drews service

Though I make my living building Harley-Davidsons, I am slowly but surely building a bike to run, hopefully in ’08 which is non H-D.625cc, 1cylinder, 6 speed, liquid cooled, & probably turbocharged Jawa Engine, in a chromemoly reproduction Norton style featherbed frame with full fairing. Should put out around 130+ HP on race gas.Don’t get me wrong, my life revolves around Harley-Davidson motorcycles, and has for over 30 years, but I also sell Jawa speedway bikes & promote speedway racing here in Indiana. So, a Jawa engine I can get for a good price.

I can’t wait to see all the great equipment on the salt this year, and hopefully I’ll be measuring your bike again, which would indicate another record being broken.

Denis Manning told me when I first met him that all I had to do was go to Boneville once, and I would probably get bit by the speed bug bad. Boy, did he ever call that one on the money.

Good luck on whatever you’re building, and see ya in September.

–Drew Gatewood

drew on salt

BIKERNET QUOTE OF THE WEEK–Excellence is the unlimited ability to improve the quality of what you have to offer.

–Rick Pitino

DP_Long_Logo

PORTLAND OREGON EASYRIDERS BIKE SHOW INVITATION FOR LUNCH–Everyone here at American Cowgirls would like to invite you and your guests to try us for lunch while attending the Easyriders Bike Show Tour 2007 in Portland Oregon. We have a great Lunch & Dinner Menu featuring Sandwiches, Wraps, Burgers and Steaks just to name a few.

Our nightlife is one not to miss. Every night of the week there is something going on. Texas hold em Poker, Billiards, Karaoke, Live DJ and of course girls dancing on the bar. No we are not a Gentleman’s Club but, we are the place to be for the Down Home Country Nightclub everyone is talking about. The party starts at 9pm when the DJ is playing your song.

Join us for the after party March 24th 2007.

We are located in the heart of Portland at 500 NE MLK Blvd. across the street from the Oregon Convention Center.At American Cowgirls, we strive to bring you the best service in the industry. American Cowgirls has a warm, open atmosphere and we pride ourselves in being a non-smoking establishment for the comfort of our guests. A smoking area is provided outside our front entrance.

So please take the time while attending your event to cut loose with your new friends here at American Cowgirls. Remember we are just a few steps across the street.

–Matt Oakland
Christine Oakland
Owners-American Cowgirls Bar & Grill
500 NE MLK Blvd.
Portland, OR 97232
Phone: 503-233-2211
Fax: 503-233-2216
www.americancowgirlsbarandgrill.net
www.myspace.com/americancowgirls

cut3

A 360-HUB BRAKE TESTIMONIAL FROM SHOW WINNER–Thank you all for making such great products and letting Dynamic Choppers showcase them on this motorcyle ‘Ditch Digger’ (long story behind that name).

We debuted this motorcycle at the 2006 Artistry in Iron at Vegas Bike Fest, sadly not the winner.

It appeared again at the Big Twin West show where it was awarded an ‘excellence in design award’.

This past weekend it was in Pomona at the first ever Pro Class Easyriders show where it won, it will move forward to Kansas in May, and if it achieves a top 6 placement Dynamic Choppers will tour with Easyriders in 2008.

This was not possible without any of your help, once again thank you.

Paul Stewart1
Here’s Paul’s bike.

Also note that HOT BIKE did a photo shoot on this bike for their next hot girls/ hot bikes issue which will be on the news stands for three months.

Also another photo shoot was done where it will be a feature bike in the very near future again with HOTBIKE, (first available issue).

–Paul Stewart
Dynamic Choppers, Las Vegas
3111, S. Valley View, # U – 101 – 103
Las Vegas,NV 89102
702-367-6543 shop
702-367-6848 fax
www.dynamicchoppers.com

–from Chet Burozski
Sales and Marketing Director/360-degree brake system
Baldwin Wilson Development Corp.
1531 E. Northfield Dr.
Brownsburg, IN 46112
W. (317)852-7867
C. (317)370-0920
F. (317)858-9287
www.360Brake.com

sign dog

ARKANSAS HELMET LEGISLATION INTRODUCED–We have been hearing rumors that there would be another Helmet Law Bill introduced in the Arkansas legislation, and sure enough, there is. We can’t just sit idly by and let this get pushed down our throats.

It is time start educating yourself, get to know your state representative and senators, and ask them not to support this bill. Get the local restaurants, gas stations, hotels, and any other place bikers frequent involved. Let them know that motorcyclist are reputable and should have the privilege to have the right to choose whether or not they want to wear a helmet.

Let them know that many tourist dollars are brought into the state of Arkansas for the simple reason, of Freedom to Choose.

When you go to the link to look at the bill, you will find it is short and not so sweet. It is taking away the privileges that many have fought so long and hard to keep.

I am asking for you to start preparing, and when the right time hits, we need to be ready to voice our opinion.

Please send this out to all the members of your District, and let’s use this opportunity to help us win this battle.

–Don Wesson
ABATE of Arkansas
Co-Chairman

W8less Banner

Continued On Page 2

Read More

January 10, 2007 Part 3

BIKERNET END OF NEWS FLASH–MYSTFREE FROM DOHERTY, THUNDER BY THE BAY AND GIBTOWN BIKEFEST, SUPERSHOW 2008 IN TORONTO, DRIVE SIDE CALIPER BRACKET COVERS, NASH IN DAYTONA, V-TWIN EXPO SEMINAR SCHEDULE, MAVERICK WEBSITE UP, ROAD TALES BY SALVADORI, ACCIDENT MANAGEMENT CLASSES ALL OVER THE COUNTRY, SCOTT JACOBS PREVIEW, LIFESTYLE CYCLE HIRING AND MORE.

Continued From Page 2

THE BIKERNET QUESTION OF THE WEEK–Why do lawmakers concern themselves so much with healthcare costs relative to motorcycle accidents? Bikers are patriotic citizens, many of whom have insurance but because of things like denial of benefits for living a risky lifestyle, or fixed policy limits by insurance companies who charge high premiums but offer lousy coverage (reducing their risk exposure), biker’s are somehow blamed for the shortfalls.

I wonder how strongly Senator Carroll has spoken out about the cost to tax payers for health benefit gifts bestowed on illegal aliens. Or am I supposed to call them undocumented? I like the first description better. Hey Carroll, get your head out of your ass and look at what’s really costing us money.

Part of the blame is paying people like you to rule instead of serve. Want to save us some money? Retire and move to Mexico.

–Pan

You know it’s bullshit. Some citizen complains, then the legislator sees it as a feather in his or her, cap that won’t piss off all the voters, and they go for it. If they truly wanted to save money, there’s major fish to fry, like hospitals that kill 150,000 with infections annually, obesity that will cost billions this year and car accidents killing 44,000 this year. How about helmets for them?–Bandit

Oldbon

HAVE YOU EVER BEEN GUILTY– OF LOOKING AT OTHERS YOUR OWN AGE AND THINKING, SURELY I CAN’T LOOK THAT OLD. WELL, YOU’LL LOVE THIS ONE! MY NAME IS ALICE SMITH AND I WAS SITTING IN THE WAITING ROOM FOR MY FIRST APPOINTMENT WITH A NEW DENTIST. I NOTICED HIS DDS DIPLOMA, WHICH BORE HIS FULL NAME. SUDDENLY, I REMEMBERED A TALL, HANDSOME, DARK-HAIRED BOY WITH THE SAME NAME HAD BEEN IN MY HIGH SCHOOL CLASS SOME 30-ODD YEARS AGO. COULD HE BE THE SAME GUY THAT I HAD A SECRET CRUSH ON, WAY BACK THEN? UPON SEEING HIM, HOWEVER, I QUICKLY DISCARDED ANY SUCH THOUGHT. THIS BALDING, GRAY-HAIRED MAN WITH THE DEEPLY LINED FACE WAS WAY TOO OLD TO HAVE BEEN MY CLASSMATE. AFTER HE EXAMINED MY TEETH, I ASKED HIM IF HE HAD ATTENDED MORGAN PARK HIGH SCHOOL.

“YES. YES, I DID. I’M A MUSTANG,” HE GLEAMED WITH PRIDE.
“WHEN DID YOU GRADUATE?” I ASKED.
HE ANSWERED, “IN 1973. WHY DO YOU ASK?”
“YOU WERE IN MY CLASS!”, I EXCLAIMED.
HE LOOKED AT ME CLOSELY.THEN, THAT UGLY,OLD,BALD,WRINKLED,FAT ASS,GRAY-HAIRED,DECREPITSON-OF-A-BITCH ASKED,
“WHAT DID YOU TEACH ???”

–from James Schnarr

LIFESTYLE CYCLES BANNER

COME WORK AT LIFESTYLE!Love to ride and talk about Motorcycles? Have great people skills?Like to make money?

If so, then LifeStyle Cycles needs to hear from you! We have an immediate opening for a motorcycle sales person. The ideal candidate will be an experienced salesperson with great listening skills, attention to detail, great computer skills, team player and a “can do” attitude.

If you think you’re the man or woman for the job and has what it takes to be a part of California’s premiere motorcycle dealership, then stop reading and send your resume and cover letter to junior@lifestylecycles.com! Opportunities like this do not happen often!

jacobs elvis

SCOTT JACOBS PREVIEW–We at Scott Jacobs’ Studio would like to extend the courtesy of a sneak preview of upcoming canvas releases. These images will be unveiled at both the Barrett Jackson Auction (Jan. 13th – 20th) and the Harley Dealer’s Winter Meeting (Jan. 20 – 23). We look forward to seeing some of you at either or both of these exciting events. Witness below the very FIRST and much anticipated Elvis painting by Scott and authorized by Elvis Presley Enterprises entitled: ELVIS ROCKS! The detail is extraordinary (note the music sheet reflecting in the wine glass) as we have come to expect from the Master of Photo-Realism.

jacobs racer

FLAT OUT depicts Jay Springsteen doing what he has done best over a 35+ year career. As usual the canvas giclee will be signed by Scott and Jay.

AMERICAN BEAUTIES is a stupendous image of MARILYN capturing the essence of her allure which is certain to become timeless. Artist proofs are currently available on a first come basis. Since I will be traveling the next two weeks you can reach me via cell @ 720-810-3660 or call the Scott’s studio directly @ 858-756-6725 with any questions or to place an order. Happy New Year to all.

jacobs marilyn

Cheers,
–Ron Copple
Scott Jacobs Studio
303-431-4453
www.scottjacobsstudio.com

scott jacobs banner

LET’S TAKE A QUIET BIKERNET RELIGIOUS MOMENT OF REFLECTION–May the fleas of a thousand camels infest thecrotch of the person who screws up your dayand may their arms be too short to scratch…AMEN

–from Ross Parrow

ACCIDENT MANAGEMENT CLASSES AVAILABLE ALL OVER THE COUNTRY–WE SHOULD ALL TAKE ONE–ASMI celebrated 10 years of Bystander Assistance Training and passed the 10,000 student mark!Our new Instructor Trainers (Virginia Oakes, GA and Gail Riley, MA) began training more instructors and our new ASMI BOD was formed. Click Here http://www.accidentscene.org/about> to meet the BOD

After two years our new trademarked logo was finally approved and a more professional student package and revised website were launched. http://www.accidentscene.org/index.htmlOur office moved to a new location only a mile away where we are able to make better use of our space.

2008 is expected to bring more growth

A Third instructor Trainer (Denise Carey, TX) will be added in JanuaryA concentrated effort to push for training to the Southwestern & Western States will be focused onWe will increase our efforts to fund raise in order to support the continued growth of ASMI. Click here to find out how you can help. Anyone can participate since there are ways to help that cost nothing!

http://www.accidentscene.org/help.htm

We will request more support and an increased presence from all groups and agencies who deal with motorcyclists and motorcycle safety so we can reduce injuries and fatalities to motorcyclists!

ASMI events like WIM and TTRR give you a change to have fun riding while bringing awareness to ASMI and raising money that helps keep class fees low http://www.accidentscene.org/events.htm

I would like to welcome the many new instructors we have. Former students are our best form of advertising so getting some people trained is essential to spreading the word.

Please note that the Women In Motion Flier was posted today. The Tommy Thompson Reunion Ride Flier will be ready to be posted in the next couple weeks. We will be going to North Carolina this year and will do day trips from Cherokee, NC where we will be stationed at the Holiday Inn. Evening parties will help us re-group and enjoy reminiscing about or daytime adventures. For more information: http://www.accidentscene.org/events.htm

Vicki Roberts-Sanfelipo, RN/EMT
Director Accident Scene Management, Inc.
President of SOS & Conspicuity Inc.
www.accidentscene.org
info@accidentscene.org
(877) 411-8551 – toll free
(262) 521-2880 – local
(262) 436-0286 – fax

WHITEHORSE PRESS BANNER

ROAD TALES BY THE MASTER OF MOTORCYCLE LITERATURE–Popular motojournalist Clement Salvadori has been sharing his stories from the road with the readers of Rider magazine since 1988. Now, 101 of those engaging Road Tales have been brought together in one book, cleverly illustrated by his long-time friend Gary Brown.

These tales are spun by an observant and experienced traveler who can make a quick ride on the back roads near his home just as entertaining as a trip across the country.

Meet some of the characters he has encountered (you might be among them), laugh with him at some of his blunders, and join him for bread, cheese, wine, and a stupendous vista somewhere away from the hustle and bustle of humanity.

rebelrodz_004_0802_01

OLD SCHOOL RODZ MEETS EDITOR OF REBEL RODZ–Deer Geno,

Thank you for your recent comments about RebelRodz here on bikernet! You area wonderful and wise man to warn the people everywhere to not read ourmagazine, RebelRodz.

When I first red your warning hear on bikernet, I thought, why would thisman, Geno, who doesn’t even know me, not want people to read RebelRodzMagazine? I thought and thought about it, until it came to me: it isdangerous for people to read our magazine, RebelRodz. It can hurt them, evenkill them. They might, for instants, laugh themselves dead while reading oneof those funny articles in RebelRodz.

They might choke on a cheeseburger whenthere looking at one of dose amazing little kars we have in RebelRodz. Theymight even trip over their shoelaces while there looking at some of dosesexy women in RebelRodz… So yes, I agree with you, deer Geno: Peopleeverywhere must stop reading RebelRodz immediately, it’s for there own good!

You know, I did not want to be the editor of RebelRodz, but the importantpeople here in this company what publishes RebelRodz, they made me do it.They were holding a gun to my head and saying, “you must do RebelRodz or wewill hurt your dog. Well, as you can imagine, I love my dog, so I must doRebelRodz, I half no choice.

But I will make sure that there will be a warning label from now on onRebelRodz, like on cigarette packs, warning the people of the healthhazards if they read RebelRodz. Please, people, do not reed RebelRodz. Itcan kill you!

Yours truly,
–Kai, the editor of RebelRodz

Maverick

NEW MAVERICK ART SITE–Just a quick note to say a new site has been launched at http://www.maverickcustompaint.com so please check it out. It is still under construction as far as new galleries are being added and expanded, but I’m proud of the new look, and hope you enjoy visiting.

Monte
Monte Moore/ Artist
monte@mavarts.com
Phone 303-901-1870
webs : www.mavarts.comwww.maverickcustompaint.com
www.myndzei.com

VTWIN EXPO BANNER

V-TWIN EXPO SEMINAR SCHEDULE– Agoura Hills, CA-The 8th annual V-Twin Expo is just around the corner, February 2, 3 and 4th, 2008 in Cincinnati, Ohio. For those dealers planning to attend, be sure to mark your calendar for one of the most important seminars you will attend. Survival of the Fittest features panelists made up of your peers answering questions that will help you not only survive in 2008, but grow your business..

V-Twin Exclusive — Combating Counterfeits and Knock-Offs in the Motorcycle World
Sunday, February 3rd ~ 1:00 pm – 2:00 pm
Room 234 Duke Energy Center

Some call imitation the highest form of flattery. Others call it counterfeiting. Custom builders and parts designers are feeling the impact of infringement and knock-offs both from domestic and foreign producers. This seminar explores some of the means of protecting novel designs and inventions and some of the remedies that are available when someone else imitates a product without proper permission.

The V-Twin Expo will welcome over 500 exhibitors in 2008 and thousands of v-twin dealers in Cincinnati at the Duke Energy Center. The V-Twin Expo remains the one show to attend for v-twin dealers. “I attend the v-twin expo every year, it is the single most informative event there is. It gives me and my staff personal time with the people we deal with every day over the phone. It’s nice to put a face with a name; also it gives my store the competitive edge it needs” said Duane Easter of Cycle City in Tennessee.

BCCOM

HAPPY NEW YEAR FROM BCCOM–On behalf of BCCOM we would like to wish you all the best in the new year. Special thanks to everyone who has been sending in their membership renewals and taking transferable plates petitions to get signed. We appreciate your support and couldn’t do it without you!

VANCOUVER MOTORCYCLE SHOW TICKETS

Tickets to the Vancouver Motorcycle Show on January 24-27th are sure to bring a smile to any motorcycle enthusiast’s face!Tickets are on sale now at Trev Deeley Motorcycles for $11 for adults and $7 for kids (6-15).

For every bike show ticket sold, Trev Deeley Motorcycles will donate $1.00 to BCCOM!!Deeley’s is located at 1875 Boundary Road in Vancouver. Phone: (604) 291-2453 or check them out on-line here: http://www.trevdeeley.com/

Vancouver Motorcycle Show details can be found here: http://www.sportsmensshows.com/VanCycle/

VANCOUVER MOTORCYCLE SHOW – JANUARY 24-27

Please stop by and check us out at the Vancouver Motorcycle Show on January 24-27 at the Tradex Centre in Abbotsford. Please note that our booth number has been changed to 583 right near Custom Alley so please stop by and say hi.

CANADIAN MOTORCYCLE DRAG RACING ASSOCIATION ANNOUNCES 2008 SCHEDULE–

CMDRA Western Schedule:
MAY 17 & 18 – Nl’akapxm Eagle Motorplex, Ashcroft, BC (http://www.eaglemotorplex.com/)
JUNE 7 & 8 – MHDRA Drag Strip, Medicine Hat, AB (http://www.mhdra.com/)
JUNE 14&15 – Grand Bend Motorplex, Grand Bend, ON (http://www.grandbendmotorplex.com/)
JUNE 28 & 29 – Castrol Raceway, Edmonton, AB (http://www.castrolraceway.com/)
JULY 19 & 20 – Northern Lights Raceway, Fort St. John, BC (http://www.northernlightsraceway.ca/)
AUGUST 9 & 10 – Mission Raceway Park, Mission, BC (http://www.missionraceway.com/)
SEPTEMBER 13 & 14 – SEASON FINALE – Castrol Raceway, Edmonton, AB (http://www.castrolraceway.com/)
SEPTEMBER 15 – Year-End Awards Banquet – Edmonton, AB

CMDRA Eastern Schedule:
JUNE 14 & 15 – Grand Bend Motorplex, Grand Bend, ON (http://www.grandbendmotorplex.com/)
AUGUST 9 & 10 – Grand Bend Motorplex, Grand Bend, ON (http://www.grandbendmotorplex.com/)Remaining dates TBA.

Please check www.cmdra.com for updates.

Nash Banner

NASH MOTORCYCLES DAYTONA ACTION–I dont know if Chris from Cyclesource talked to you yet or not, but were trying to organize a big event out in Daytona at the Skatepark. We want to have bike shops and vendors set up all week. Then also do an old school bike show, have a couple bands play, and do pro skater demos.

–Marlin
NMC

caliper_covers

CUSTOM DESIGN STUDIO DRIVE SIDE CALIPER BRACKET COVER– Anybody who has a drive side caliper bracket that is welded to the frame knows what these are for. The weld on tabs look great molded and painted to match the bike’s paint job.

The problem is when you tighten the bolts down to their torque specifications, the paint blisters up and looks unprofessional. With these covers designed by Kirk Taylor you just put a couple of dabs of clear silicone on the backside of the cover and you’re done.

They are raw aluminum so you can paint, polish or plate to your needs. To remove, just poke your screwdriver from the backside and they’ll pop out with little effort.

MSRP $40/pair.

To order call (415) 382-6662 or email customdesignstudio@sbcglobal.com.

old illo

SUPERSHOW 2008 IN TORONTO–WITH 425,000 square feet of “Everything in Motorcycling” and more than 55,000 expected visitors during the three day exhibition, Supershow 2008 will run from Friday, January 4th to Sunday, January 6th at the International Centre, 6900 Airport Road, Mississauga, Toronto, Canada.

Opening times are 10am to 10pm on Friday and Saturday and 10am to 6pm on Sunday.

Known as “the Big One by the Airport”, because of its location and free parking at the International Centre (6900 Airport Road), the North American International Motorcycle Supershow is a motorcycle shopping extravaganza, offering something for every interest, according to the organizers, including sport bikes, cruisers, moto-cross, off-road, vintage, touring and custom bikes.

Some of the 2008 features and special guests include long distance rider Helen 2 Wheels, world’s fastest woman Trillium Muir, Team Arrow’s Streamliner looking to break the 500cc land speed record (held for more than 50 years), custom bike awards competition, MAX Awards, Canadian motorcycle racer Vicki Gray and A Century of Motorcycling exhibition among many others.

www.supershowevents.com

FW-TOUR-bus-FLAT-H 1
Watch for this PSI and others tour bus in Daytona and 11 other major events. If you’re looking for a vehicle to carry your product nationwide during 2008, drop us a line. They have three open spots.

THUNDER BY THE BAY AND GIBTOWN BIKE FEST–What a great start to 2008. Last weekend was Thunder By The Bay and next weekend is Gibtown Bike Fest on the 12th and 13th Then, the Florida Bike Builders Invitational and Florida Motorcycle Expo – JANUARY 26th and 27th

We have over 100 bikes registered from all over the state in the second largest independent bike show in the US!

This year we have great celebrities like Michele Smith From AMERICAN THUNDER going to be there all day SATURDAY filming, Nikki Lee 2007 Miss Full Throttle and our 2008 Full Throttle Calendar Model, Erin Mckinnon Maxim’s Hometown Hottie Contest winner, Raquel Gibson Magazine Playmate, The Ice Cream Man From Hell, Big Rick Hoffman for Logic Motorcycles and many more National and Local Celebrities.

The Miss Full Throttle Contest will also be Saturday night at 6pm! If you are interested, please show up around 4pm to sign up with two different outfits 1 – Biker Wear 2 – Bikini (This is not a skin to win contest) Miss Full Throttle will be a well recognized face in the motorcycle community by the end of 2008 with all the opportunities that are given to you. $750 in cash to the winner as well as a cover in 2008 and the poster in 2009 plus numerous events throughout the year.

–Tony Cianci
Editor – Florida Full Throttle Magazine
www.fullthrottleusa.com
tonyc@fullthrottle.com

Mist-Free 1

MYSTFREE FROM DOHERTY–Finally a no nonsense cure for the dreaded Twin Cam oil mist dilemma. Tim Doherty, CEO of Doherty Machine, has just announced the release of what is certainly one of the most significant new products developed for the TwinCam 88 since its introduction in 1999.

According to Doherty the single largest complaint of TC owners is the oil mist released through the engine breather system that ultimately ends up coating the side of the bike, rider and passenger. Until now, there have been a number of what amount to “band aid” patches for the problem but none have produced notable permanent results.

In stark contrast to these temporary patch techniques, Doherty’s new MYSTFREE air/oil separation module eliminates the oil mist problem permanently! Both in house and independent tests have shown that the MYSTFREE unit eliminated 99% of the oil residue emitted from TwimCam machines in good mechanical condition.

Tested in engines ranging from the stock 88 up to 154 ci, Doherty’s unique device controlled virtually all misting normally associated with a build up in crank case pressure and inadequate oil pump scavenging. A direct bolt in replacement for the factory module, MYSTFREE can be installed in about an hour with no additional modifications.

There are currently a number of patents pending on MYSTFREE which retails for $229.95. For complete details call 928-541-7744 or visit www.dohertymachine.com

daisy big bear

THAT?S DAISY ON HER BIG BEAR CHOPPER–And this is the end of the news. Daisy will be here, getting interviewed on Saturday. She is a die-hard rider, not to mention very cute? Bandit had to leave to pick up Ray Wheeler; his bike broke down about two-miles down the road.

We have a crazy weekend ahead of us, with Charlie Brechtel coming down with more guests than I can mention. A band, women, people to interview and I don?t know what else. I?m gonna act like the cats and disappear?

Have a great weekend and we?ll have a report on Sunday about how it went on Saturday!

Layla

Read More

January 04, 2007 Part 4

BIKERNET NEWS EDITORIALS–SADDLEMAN AND THUNDER BOB GIVE SEATS AWAY, DAVE ZIEN NEEDS YOUR SUPPORT, STURGIS RALLY AND STURGIS COUNTY LINE SPONSORS BIKERNET, JOKER TRANNY FACE, ASSALT WEAPAN NITROUS SYSTEMS AND CLASSIC PANHEAD PIPES

Continued From Page 3

zein bike

Viet Nam Memorial Bike–I thought you guys might like a little more insight into Zien’s accomplishments. Attached is a letter I sent out to some ABATE chapters around the country, hoping for some commendations for Dave from them.

I have some photos of the bike we left at the Viet Nam Memorial in Washington, D.C., but I want to get a storyline for you from one of the builders. Basically, it was a Viet Nam era styled chopper which several members of ABATE of Wisconsin built as a project. All parts, including frame and motor were donated. The paint was done by a Viet Nam vet friend of mine, and it’s beautiful in detail. The seat was hand stitched, and nobody has ever sat on this bike. Hanging from the steering head are dog tags representing the 39 Wisconsin MIA’s from Viet Nam.

zein tank art

There’s a whole lot more about this bike, but I want to get it firsthand from one of the builders. This was the largest item ever left at the Wall in Washington, D.C. Afterwards, it was warehoused in the Smithsonian Institute, which upset many of us because this bike needs to be seen. With the help of Zien, the bike was transferred to the National Parks Service, and went on tour of the USA at major bike events, including a special ceremony at the Sturgis Motorcycle Museum. That’s why Pam West is coming from Virginia to Dave’s banquet. She’s who we worked with to get the bike out to South Dakota.

It stopped in Milwaukee for a week display at our War Memorial Museum on the lakefront. After a ceremony there, we saddled up and did an Iron Butt to Sturgis to be at the ceremony at the Sturgis Museum. Tommy Thompson flew in as well as several legislators from Wisconsin. I rode with Dave, Mark Bugher, Wisconsin Dept. of Administration, and three vets, including one of the team that worked on the bike. I’ll get you some better photos and a story as soon as possible. This bike is a must see for any Viet Nam Vet,

WIN A CUSTOM THUNDER SADDLE OF YOUR TATTOO!–This is what you have been waiting for. For the next 6 months MetricThunder.com will be giving away a custom Thunder Saddle each month. These saddles are the most exclusive saddles and most comfortable saddles every made. They are very cool because each saddle represents your tattoo.

The Tattoo Contest

BANDIT of Bikernet will pick the best looking tattoo of the month and we will make a custom Thunder Saddle with the Tattoo embossed on the saddle. Each saddle comes equipped with Saddlemen’s Saddle Gel. Saddle Gel makes an incredibly comfortable seat and allows you to stay on your motorcycle for longer periods of enjoyable riding.

How to Enter the Thunder Saddle Contest

Entering is easy. Just send an email to: tat@horsepowermarketing.com with your:

? Name
? Telephone number
? Picture of you and your tattoo
? Year and model of motorcycle

It’s just that easy. Send a picture of yourself sporting your favorite tattoo and you could be riding around with it on your motorcycle. It is your exclusive seat that is a show stopper and conversation piece wherever you stop.

For more details and rules clicking here.

sturgis bike week logo

MORE NEW SPONSORS ON BIKERNET—Sturgis Bike Week is the premier source of screen printed apparel for the annual Sturgis Bike Rally, located in Sturgis, South Dakota. Sturgis Bike Week has had the number one shirt design for the Sturgis Bike Rally for the past three years. Sturgis Bike Week continues to be the cutting edge leader for artwork on biker apparel.

Sturgis Bike Weeks line of apparel includes shirts for men, women, and kids. The lines include everything from classic biker artwork to more contemporary designs.

Check out all of the designs on our online store.

Sturgis Bike Week
20525 Glencoe Dr.
Sturgis, SD 57785
(605) 347-6570
Andy McDaniel
Sturgis Bike Week Inc.
(605) 347-6570
www.sturgisbikeweek.com

sturgis county line page

STURGIS COUNTY LINE ALSO ON BOARD BIKERNET FOR 2007–I’m in production of the Sturgis County Line website (see attached) which is going to be absolutely killer. I’m also going to need a high-res Bikernet logo right away along with some banner artwork (I’ll know what size when I get done with the site) as well.

–Lon
Motorcycle Events Marketing
(605) 415-5599
lonjr@rushmore.com

Sturgis County Line will be our home away from Home in Sturgis of 2007. You’ll be able to find us under the Girls of Bikernet and whiskey bottles.–

hyd. clutch2

JOKER MACHINE JX HYDRAULIC CLUTCH ACTUATORS– Completely CNC machined from a solid block of billet, polished, then given top quality chrome plated finish! Thickness is only 1 3/4″ to give your bike clean lines and eliminate exhaust pipe clearance issues. Includes all necessary chrome mounting hardware including our new billet dipstick and AN-3 hydraulic line fitting. New trick feature: Super easy line bleeding is capable due to our recessed “Speed Bleeder” type bleed screw – just loosen screw half a turn, pump the Master Cylinder lever until adequate pressure is achieved, then re-tighten…done! Excellent combo when used with our 960800 or JX clutch master cylinder assemblies. Internals include a “Hard Anodized” piston for smooth action and long life.

hyd. clutch smooth1

Retail $269.95
Style Part No.
Finned 06-10FN
Smooth 06-10S

drawing face

NEW CANTINA MEMBER REPORTS ON ACCIDENT–I’ve been following Bikernet so long I finally joined the Cantina. Glad I did! The drawing below was doneimmediately after I passed the “incident” and got home. The poor dudeon the dresser had just been rear ended at a downhill stoplight here indeadly Vancouver. I don’t know if he was hurt but he did have thepresense of mind to crawl back to the offending van and drape himselfover the front tire so the prick wouldn’t try to drive off before the lawarrived.

drawing wreck

He was on his phone calling for help when I passed and it wasthen that I noticed the dog sitting in his lap. He was scared and shakingbut seemed OK, thank god. I don’t get people riding with their animalstucked into their jackets but then again the older I get…..

Thanks for writing. I’m trying to finish off an Ariel ’40 sidevalve that’sbeen in my basement way too long. I’m sorta retired which means I’mworking harder than ever, and I’ve saved enough (actually my wifesaved it for me, I never could) to maybe buy a new Street Bob. It’s thefull sized Sporty that I’ve always thought Milwaukee should build. I rodea ’95 Sporty for years but it was turning my old body into a slurpie.

–Dick Allen

AWscale with val

ASSALT WEAPAN NITROUS SYSTEMS–While Rick Krost of U.S. Choppers builds the Assalt Weapan rigid frame, designed specifically to fit Valerie Thompson, Berry Wardlaw of Accurate Engineering dials in the engine with a Pegasus EFI system from BDL and nitrous. I recently received this e-mail from Pablo. “Check this:www.coldfusionnitrous.com Dobek at Techlusions works with these guys. Very good prices!!!!! The other one I also look at also is www.nitrousexpress.com Cold Fusion has some real cool nozzle adapters for EFI injectors.”

ACCURATE ENG. BANNER WHITE

Don’t know if you are goin this way for power (200 MPH Club). If you are, is to be “carbinated” or “Infected”??? Multiple stages might be a real good idea. Forget about “Dry Nitrous”.

Daytona Twin Tec has good EFI systems. V-Thunder has a simple module for a carbinated system with Nitrous.

US Chopper banner

One thing I saw on the bike was that front shot with Val on it. Fuck man, adios those handle bars!! Get something goin low and close to the fork tubes. A girder made from aircraft tubing would be real bitchin.

Air-Tech makes good aero body work stuff.

Have you thought about changing your exhaust at all??? Also looking at the pictures of the engine do your oil returns in the left case side dump onto the flywheels???

paughco Pan goose upsweep logo1

PANHEAD GOOSENECK UPSWEEPS– Real world choppers are hot and Paughco’s new PANHEAD GOOSENECK UPSWEEPS speak chopper with a capitol “C”. The latest addition to a seemingly endless collection of custom and replacement exhaust systems for H-D and H-D based choppers, the new exhaust is about as hard core as it gets. Designed specifically for rigid frame Pans only, the pipes will fit electric or kick start models and measure 1 3?4″ in diameter.

Finished in Paughco’s flawless chrome, the pipes retail for just $208.95. These pipes have NO BAFFLES and are supplied with mounting hardware. For complete details call 775-246-5738. On line at www.paughco.com

Paughco Banner

BSA girlcolor

THAT’S IT FOR THIS WEEK–But it’s never the full extent of the news. I could produce one of these each day, shit is happening so fast. Kim Hotinger is helping me with wheels for the Assalt Weapan. We’re running All American Wheel blanks, which will be cut, machined and ready to rock by Renegade Wheels of Orange. The rear 17 will be a plain flat aluminum wheel, but the front wheel must have 30 percent of the 18-inch wheel space open and Renegade wheel team is sponsoring the machining and making of the hubs. We will run 1-inch axles and no front brakes.

STREETWALKER BANNER

In the near future we will feature an install of Streetwalked Exhaust by Envy Cycle. Hell, we’ll start a complete motorcycle build by Lucky Devil Metal Works for the staff Queen, Nyla. It will be a bobber of supreme, little woman, characteristics. You’ll see it built from the Kraft Tech frame up.

EReventsposter

Many of us are headed to the Easyriders Show in Pomona this Saturday and Sunday. Me and a truck load of brothers and hauling the Salt Shaker and the Amazing Shrunken FXR to the Pomona Fairplex tomorrow for set-up. Then we’ll peel out and attempt to beat Los Angeles traffic back to the Port on the coast.

Have a helluva weekend. It’s going to be the best year yet.

Ride Forever,

–Bandit

Agent zebra
Agent Zebra attempts to make up for last week’s photo by showing off his fire power. We’ll see if he can hold up.

Bonneville 2007 sponsor banner

Read More

January 04, 2007 Part 3

BIKERNET NEWS ALERTS FOR 2007–SNITCHING ILLEGAL IN CANADA, CODY CLUB RALLY NO PROBLEM, PORTSMOUTH DEATHS WAY DOWN, TEN WAYS TO STAY MOTORCYCLE SAFE, BIKERNET REPORTER HITS STURGIS IN WINTER, SEX BEST HEALTH REMEDY AND LIFE IS BITCHIN!

Continued From Page 2

JJsbook
JJ Solari wrote a book that melts as you turn the pages. If the mailman will deliver mine, we’ll bring you a reveiw shortly. Or go order it from a bookstore and hope they don’t throw you out. It’s bad shit.

HELLS ANGELS RALLY TOPS CODY NEWS FOR 2006– There were months of trepidation before the Hells Angels came to Cody.The biker rally was the No. 1 story in Cody in 2006.But for many locals it was law enforcement, not the notorious outlaw biker gang, which caused the most consternation during the club’s World Run July 26-30.

Just prior to and during the first couple of days of the event, there were numerous complaints about officers – especially state troopers – being over-zealous with traffic stops.Local people and families reported being pulled over numerous times or for such things as having broken license plate lights.

Police quickly cut back the number of visible officers, and the rally went on without any major incidents.And estimated 1,300 Hells Angels – likely the largest gathering on record – attended the event.Police in a post-rally press conference said there was good reason for the heightened security and traffic stops.Had there not been such a major police presence and strict enforcement, there could have been real trouble, police spokesmen said.

— By Mark Heinz

–from Rogue

BSAgirl

DEATHS DOWN IN PORTSMOUTH–PORTSMOUTH — The number of fatal motor vehicle crashes in the state dropped from 161 last year to 122 in 2006, which Division of Motor Vehicles Director Virginia Beecher credits to increased police presence and department initiatives.

In addition to the decrease in total deaths, the number of motorcycle operators killed in 2006 dropped by more than half. There were 17 deaths in 2006, 39 in 2005 and 25 in 2004.

Beecher said she thinks law enforcement officials are more visible on the state highways and local streets, which deters dangerous driving.”I think the main contributing factors of motor vehicle deaths are speed and alcohol, and as result of more visibility, people slow down,” she said. “One (death) is too many, but I’m pleased by the numbers.”

The issue of motorcycle safety in the state was brought to the forefront in 2004 when the total number of deaths jumped to 25 from 9 in 2003. After an even worse year in 2005, Beecher said she is happy to see the start of what she hopes is a downward trend.

Initiatives include a law passed last year that prevents a rider from receiving a 30-day driving permit after repeatedly failing the state test. The law requires anyone who failed the test twice to participate in a motorcycle training program.Education initiatives for both riders and new drivers have also likely helped lower the number of deaths, according to Beecher.One law that hasn’t passed, which Beecher wishes would, is one mandating helmets for riders.

— By Adam Leech

–from Rogue

BSAparts girl

HAPPY NEW YEAR FROM EVERYBODY HERE ATTEXAS SCOOTER TIMES!!!!!–Dont forget next Sunday, January 7the 5th Annual Dallas Chopper Show &Swap Meet at the Gigantic HistoricLonghorn Ballroom.

The Carter Blood Care BusWill be in the parking lot andeverybody who donates blood getsin the show FREE!!!!!

Then Get Readay For the 6th annualCONROE MOTORCYCLE EXPO & SWAP MEETSunday – January 21 -at theLone Star Expo Center – Conroe

We are ready for a wonderful 2007Hope you are too!!!

Racers

BIKERNET MOTORCYCLE SAFETY STUDY FINDINGS-10 WAYS–1.) Assume Drivers Can’t See You: Ride assuming that you and your motorcycleare totally invisible to motorists. That means you must never assume thatdrivers can see you. The odds are, they can’t so believe it yourself andalways have an “out” for dangerous traffic situations. Motorcycle Safetydepends on you.

2.) Maintain Safe Spacing: Leave plenty of space in front and back and tothe sides from all other vehicles. Be an island. Stay away from traffic asmuch as possible. This gives you more visibility and more time to react tosituations.

3.) Anticipate Trouble: Anticipate trouble situations and know what to dowhen you see them. Analyze what vehicles are doing and try to predict theoutcome. Then make sure you’re ready to avoid a bad traffic situation.

4.) Beware of Oncoming Left Turners: Beware of oncoming motorists turningleft in front of you at intersections. This is the leading cause of death ofmotorcycle riders. I’m deadly serious here. I have personally lost manyfriends to this accident. If you only remember one tip here, let it be thisone. Slow down before you enter an intersection. Have an escape routeplanned. Stay visible. Don’t travel too close to cars in front of you.Position your bike so it can be seen by the left turner. Eye contact is notenough.

5.) Ride Your Own Ride: Don’t try to keep up with your friends who may bemore experienced. Know your personal limits. Ride your own ride.

6.) Watch Out for Curves: Beware of taking curves that you can’t see around.A parked truck or a patch of sand may be awaiting you.

7.) Don’t Give In to Road Rage: Do not give in to road rage and try to “geteven” with another rider or motorist. If you follow these tips, most likelyyou won’t fall victim to road rage. It’s better to calm down, slow down, andcollect your thoughts first. Then continue on and enjoy the ride. That’swhat we’re all out there for in the first place.

8.) Don’t allow Tailgating: If someone is tailgating you, either speed up toopen more space or pull over and let them pass. Life is too short. Rememberthat a bike can stop faster than a car so you don’t want a truck on yourtail when you find yourself trying to brake to avoid an accident. Also,don’t tailgate the vehicle in front of you. Oncoming drivers can’t see you.

9.) Don’t Be Blinded by Sunglare: Beware of riding your motorcycle into sunglare. All it takes is turning a corner and finding the sun either directlyin your face or passing straight through your windshield. Some helmets haveshields to block the sun. Face shields help somewhat. But sometimes you justfind yourself blinded by the light. Slow down, pull over, shield your eyesand look for a way to change direction.

10.) Avoid Riding at Night: Avoid riding at night, especially late Saturdaynight and early Sunday when drunken drivers may be on the road. It goeswithout saying that you shouldn’t drink and ride. Going bar hopping? Leavethe bike at home and find a designated driver.

What Am I Trying To Say About Motorcycle Safety?The best way to be safe is to take a Motorcycle Safety Foundation (MSF)course to learn the basic ways to control your motorcycle and to learn howto recognize traffic situations that you need to be ready to handle.

Maintain your bike so it is safe too. Keep records of the intervals when youreplace tires, chains, clutch cables, batteries, brakes, etc. You don’t wantan equipment malfunction to contribute to a motorcycle accident.

Practice riding under all kinds of traffic situations. Ride with a buddy ifat all possible. Avoid riding long distances alone.

Become a member of any of our Motorcycles forums and read what otherexperienced riders have to say about how to ride safely.

I want you to become an aged motorcyclist because you know how to survive ona motorcycle. I don’t want to read about you in the newspaper or on amotorcycle forum or mailing list as yet another motorcycle statistic. Learnhow to be safe and responsible on a motorcycle. That’s why this Web site andforums exist and that’s why I’m writing these tips. The rest is up to you.

These 10 Ways To Be Safe on a Motorcycle have also been made available on acustom mousepad (buy direct) so you will always be reminded of them whileyou use your computer to visit the Motorcycles site or its associatedforums:http://motorcycles.about.com/od/miscellaneousproducts/ss/motogifts2006_3.htm

If you need more info on this or any other subject just go to the Sonsof Liberty Riders Info Zonehttp://solriders.com/ or http://bikers4row.org

Enews mailing list
Enews@solriders.com
http://solriders.com/mailman/listinfo/enews_solriders.com

Also, if you’re serious about being on top of the training curve, consider taking a Lee Parks Training Course called Total Control. Check Totalcontroltraining.net or call (800)943-5638. I’m going to take this course in February.–Bandit

son of liberty

MASSIVE BIKERNET EDITORIAL CORRECTION–Happy New year to you and the crew!I just finished reading Tony Tibbot’s Bike Build on your site. It’s great. I’ve been in contact with Tony via e-mail over the last couple of years regarding his bike.

Though, the article headline caught my attention because he’s not your 1st New Zealand build to be featured on Bikernet.com, I think I am:

http://www.bikernet.com/bikebarn/nzsporty.asp

Anyway, safe riding and have a great year!

–Andy

Many apologies. I’ll buy you a beer in Australia, in March, if you can make it to the show.–Bandit

arlen bike show

WIN FREE TICKETS TO THE ARLEN NESS BIKE SHOW– Win Free Tickets and Swag for the January 27th and 28th 2007 Arlen Ness Bike Show in San Jose, CA. Enter your contact information and we will draw a name each week. Go to Arlen Ness Bike Show for more details.

WINNERS:
Jani Albers wins 2 show tickets
Juan Gutierrez wins 2 show tickets
Michael A. Noble wins 2 Show Tickets
Bob Silva wins 2 Show Tickets
Margaret Lee wins 2 Show Tickets

American Thunder Promotions produces the Arlen Ness Bike Show, the Donnie Smith Invitational Bike Show and the Donnie Smith Rochester Bike Show.

Arlen Ness Contest

19 and under

UPS girl

SEX AND MOTORCYCLES, THEY WORK–The best that modern science can say for abstinence is that it’s harmless when practiced in moderation. “Saving yourself” before the big game, the big business deal, the big hoedown or the big bakeoff may indeed confer some moral advantage; but physiologically it does zip.

Having regular and enthusiastic sex, by contrast, confers a host of measurable physiological advantages, be you male or female. (This assumes that you are engaging in sex without contracting a sexually transmitted disease.)

In one of the most credible studies correlating overall health with sexual frequency, Queens University in Belfast tracked the mortality of about 1,000 middle-aged men over the course of a decade. The study was designed to compare people of similar age and health. Its findings, published in 1997 in the British Medical Journal, were that men who reported the highest frequency of orgasm enjoyed a death rate half that of the laggards. Other studies (some rigorous, some less so) purport to show that having sex even a few times a week has an associative or causal relationship with the following:

— Improved sense of smell: After sex, production of the hormone prolactin surges. This, in turn, causes stem cells in the brain to develop new neurons in the brain’s olfactory bulb, its smell center.

— Reduced risk of heart disease: In a 2001 follow-up to the Queens University study mentioned above, researchers focused on cardiovascular health. Their finding? That by having sex three or more times a week, men reduced their risk of heart attack or stroke by half.

— Weight loss, overall fitness: Sex, if nothing else, is exercise. A vigorous bout burns some 200 calories–about the same as running 15 minutes on a treadmill or playing a spirited game of squash. The pulse rate, in a person aroused, rises from about 70 beats per minute to 150, the same as that of an athlete putting forth maximum effort. British researchers have determined that the equivalent of six Big Macs can be worked off by having sex three times a week for a year. Muscular contractions during intercourse work the pelvis, thighs, buttocks, arms, neck and thorax. Sex also boosts production of testosterone, which leads to stronger bones and muscles. Men’s Health magazine has gone so far as to call the bed the single greatest piece of exercise equipment ever invented.

— Reduced depression: A study of 293 women in 2002 had the same implications. American psychologist Gordon Gallup reported that sexually active participants whose male partners did not use condoms were less subject to depression than those whose partners did. One theory of causality: Prostoglandin, a hormone found only in semen, may be absorbed in the female genital tract, thus modulating female hormones.

— Pain relief: Immediately before orgasm, levels of the hormone oxytocin surge to five times their normal level. This, in turn, releases endorphins, which alleviate the pain of everything from headaches to arthritis to even migraines. In women, sex also prompts production of estrogen, which can reduce the pain of PMS.

— Less frequent colds and flu: Wilkes University in Pennsylvania says individuals who have sex once or twice a week show 30% higher levels of an antibody called immunoglobulin A, which is known to boost the immune system.

— Better bladder control: Heard of Kegel exercises? You do them, whether you know it or not, every time you stem your flow of urine. The same set of muscles is worked during sex.

— Better teeth: Seminal plasma contains zinc, calcium and other minerals shown to hinder tooth decay. Since this is a family web site, we will omit discussion of the mineral delivery system. Suffice it to say that it could be a far richer, more complex and more satisfying experience than squeezing a tube of Crest–even Tartar Control Crest. Researchers have noted, parenthetically, that sexual etiquette usually demands the brushing of one’s teeth before and/or after intimacy, which, by itself, would help promote better oral hygiene.

— A happier prostate? Some urologists believe they see a relationship between infrequency of ejaculation and cancer of the prostate. The causal argument goes like this: To produce seminal fluid, the prostate and the seminal vesicles take such substances from the blood as zinc, citric acid and potassium, and then concentrate them up to 600 times. Any carcinogens present in the blood likewise would be concentrated. Rather than have concentrated carcinogens hanging around causing trouble, it’s better to evict them. A study published by the British Journal of Urology International asserts that men in their 20s can reduce, by a third, their chance of getting prostate cancer by ejaculating more than five times a week.

While possession of a robust appetite for sex–and the physical ability to gratify it–may not always be the cynosure of perfect health, a reluctance to engage can be a sign that something is seriously on the fritz, especially where the culprit is an infirm erection.

Dr. J. Francois Eid, a urologist with Weill Medical College of Cornell University and New York Presbyterian Hospital, observes that erectile dysfunction is an extension of the vascular system. A lethargic member may be telling you that you have diseased blood vessels elsewhere in your body. “It could be a first sign of hypertension or diabetes or increased cholesterol levels. It’s a red flag that you should see your doctor.” Treatment and exercise, says Dr. Eid, can have things looking up again: “Men who exercise and have a good heart and low heart rate, and who are cardio-fit, have firmer erections. There very definitely is a relationship.”

But is there such a thing as too much sex?

The answer, in purely physiological terms, is this: If you’re female, probably not. If you’re male? You betcha.

Dr. Claire Bailey of the University of Bristol says there is little or no risk of a woman overdosing on sex. In fact, she says, regular sessions can not only firm a woman’s tummy and buttocks but also improve her posture.

As for men, urologist Eid says it’s definitely possible to get too much of a good thing, now that drugs such as Viagra and Levitra have given men far more staying power than what may actually be good for them.

–from Art Friedman

rogue deadwood wall

ROGUE INVESTIGATES STURGIS IN THE WINTER–Most of us have been to Sturgis for the rally or have at least read about it and seen photos in the media. Did you ever wonder what it looked like when there was no rally? Well here are some shots.

I had the opportunity to travel here over the holidays to stay with my brother Ted and his wife Caroline.

Caroline runs the Harley Shop in Deadwood so be sure to stop in and say Hi when you come for the rally. Oh Yeah, buy Something. Haha.

–ROGUE

rogue sturgis mm

SNITCHES RULED ILLEGAL IN QUEBEC–QUEBEC — The Quebec government’s use of violent-criminals-turned-informants to prosecute biker-gang members was ruled illegal yesterday, possibly opening up dozens of convictions for appeal.

The ruling by Mr. Justice Fraser Martin of the Quebec Superior Court could be used by convicted biker-gang members to appeal their convictions, said Jacques Normandeau, a Montreal criminal lawyer.

“The government does not have a right to use tricks or to cheat in order to get convictions,” Mr. Normandeau said yesterday.

–from Rogue

North Hills cycle

Continued On Page 4

Read More

January 04, 2007 Part 2

BIKERNET NEWS SPECIAL REPORTS–CLASSIC BOBBER KIT, BIKERNET HISTORY LESSON, JOIN THE BCCOM FOR CANADA, SUPPORT DAVE ZIEN, TERRIBLE COP STORY, EMMISSION TESTING IN AZ, FREEDOM OF SPEECH STABBED, NOISE SIGNS CHANGED, FREEDOM FIGHTER RECOGNIZED AND BIKERNET WRITER IN TEXAS SEEN WITH HIS WIFE…

Continued From Page 1

Bobberinabox2 use 2

BOBBER IN A BOX–Once again PAUGHCO reminds us why they are the undisputed King of Choppers. Since 1968 the company has been producing bolt-on chopper parts like those used to assemble the Nostalgic Bobber shown here. Call it a “Bobber In A Box” the gutsy machine features a Paughco stretched Wishbone frame, Tapered leg Springer with Bobber fender mounts, Upsweep pipes with Bell Tip mufflers, Bobbed fenders, Indian Style 4.5 gallon tank, LePera/Paughco solo seat and springs, PM/Paughco Caliper Kit, traditional 5 _” headlight assembly, chrome spoked rims, side fill oil tank and a bag full of other replacement and reproduction BOBBER parts.

Paughco Chopper components are 100% manufactured and chrome plated at the huge Paughco facility in Carson City, Nevada. For a closer look at the original and largest collection of chopper and restoration products call 775-246-5738 or visit www.paughco.com

Bobberinabox use 1

BIKERNET SCOTTISH SCIENTESTS ON THE JOB–After having dug to a depth of 100 meters last year, Scottish scientists found traces of copper wire dating back 1000 years and came to the conclusion that their ancestors already had a telephone network more than 1000 years ago.

Not to be outdone by the Scots, in the weeks that followed, English scientist dug to a depth of 200 meters and shortly after headlines in the UK newspapers read:

“English archaeologists have found traces of 2000 year-old copper wire and have concluded that their ancestors already had an advanced high-tech communications network a thousand years earlier than the Scots.”

One week later, Texas newspapers reported the following:

“After digging as deep as 500 meters in West Texas , scientists have found absolutely nothing. They have therefore concluded that 5000 years ago Texas inhabitants were already using wireless technology.”

–from Robin Hartfiel

BCCOM

TIME TO RENEW YOUR BCCOM MEMBERSHIP FOR 2007—It’s that time of year again! If you have not already purchased your 2007BCCOM membership, it is now time to renew. If you are unsure whether or notyou are up to date please contact the office to confirm.Memberships are available through the BCCOM Office at 1-877-580-0111 or(604) 580-0111 and you can also purchase them on-line here:www.bccom-bc.com/bccom_store/bccom_store.html.

Memberships will also beavailable at our next meeting on January 10th (detals below) and at ourbooth at the Vancouver Motorcycle Show on January 25-28th. Thank you foryour continued support!

For more info call 1-877-580-0111 or (604) 580-0111.

SUPPORT BCCOM BY GETTING YOUR VANCOUVER BIKE SHOW TICKETS EARLY AT DEELEY’SAdvance tickets for the Vancouver Motorcycle Show are on sale at the BRANDNEW location of Trev Deeley Motorcycles at 1875 Boundary Road in Vancouver

You will get a special deal if you purchase advance tickets from Deeley’s:
Adult tickets $10
Junior/Youth (7-15) tickets $5

Trev Deeley Motorcycles will be donating $1 for every adult bike show ticketsold to BCCOM (British Columbia Coalition for Motorcyclists).
Monday to Friday 9:00 a.m. to 5:30 p.m.
Saturday 8:30 a.m. to 5:00 p.m.

–Trev Deeley Motorcycles
www.trevdeeley.com
(604) 291-2453

ANNUAL DAVE ZIEN BANQUET–Thank you to those who have already registered for this great event. If you plan on attending and haven’t yet sent in your registration, be sure to do it before the January 13th cut off date. I expect to reach room capacity by that date. If you haven’t yet registered, go to www.accidentscene.org and click on “events”, then on the Zien banquet registration. If you cannot attend but wish to donate to Dave Zien, click on the “donate” icon. You can register online, or print the pdf flyer and send it back with your check made payable to TTRR.

The mailing address for donations or notes of thanks is Dave Zien Banquet, 400 Travis Lane, #30, Waukesha, Wisconsin 53189.

We have some great organizations sending representatives to honor Dave Zien, including AMA, MRF, NRA, ABATE, Harley-Davidson Motor Company, Veterans Affairs, Iron Butt Association, NCOM and National Parks Service. In addition, several state motorcycle clubs and even a few from elsewhere are sending members to thank Dave for all he has done for us. Some of the raffle items include personalized side covers from Dave’s amazing 800,000+ mile motorcycle, flags and a 24 x 36 photograph of Dave standing on his foot-pegs and saluting (during a Rolling Thunder event).

Rogue is covering this event exclusively for Easyriders and Biker Magazine, and there will be numerous members of the Sturgis Motorcycle Hall of Fame in attendance, including former Wisconsin Governor, Tommy G. Thompson. If you haven’t reserved your spot for this event, what are you waiting for? Don’t miss out on this historical evening with Senator Dave Zien. Hear New York Myke talk about Zien’s devotion and dedication to flag, country and America’s veterans. Learn about Dave’s record breaking long distance rides (yes, there’s much more than just one). Hear about the many monuments and tributes he was responsible for in Wisconsin, dedicated to bikers, law enforcement, veterans and public servants.

Each person attending will receive a personalized flag tribute from Dave. His famous motorcycle will be on display for pictures, and there will be many other mementos from his illustrious career. I’m looking forward to seeing each of you that have already registered (people are coming from 15 states), and I hope you all enjoy the program and take a little bit of motorcycle history back with you in memories of this great evening.

–Tony “Pan” Sanfelipo
Founder, ABATE of Wisconsin / BOLT
Member, Sturgis Freedom Fighter Hall of Fame, 2002

cop

POLICE OFFICER DOWNED–As reported earlier this week, some dirtbag who got pulled over in a routine traffic stop in Florida ended up “executing” the deputy who stopped him. The deputy was shot eight times, including once behind his right ear at close range. Another deputy was wounded and a police dog killed.

A statewide manhunt ensued. The low-life piece of human garbage was found hiding in a wooded area with his gun. SWAT team officers fired and hit said low-life 68 times.

Now here’s the kicker: Asked why they shot the guy 68 times, Polk County Sheriff Grady Judd told the Orlando Sentinel…get this.

“That’s all the bullets we had.”

–God bless Sheriff Judd!

rogue old saloon gun sign

Photo from Rogue.

NO EMISSIONS TESTS FOR MOTORCYCLES IN PIMA, ARIZONA–Owners of more than 6,200 motorcycles in Pima County will soon nolonger have to worry about whether their vehicles can pass the state’semissions tests.The U.S. Environmental Protection Agency agreed on Friday thatexempting the motorcycles from the testing will not harm air qualityin the region.But the change, which becomes effective in about a month, helps morethan those who enjoy bugs in their teeth: The EPA said those who drive”collectible vehicles” also can skip the testing. That affects another1,400 vehicles.

But the federal agency said computer modeling done by the stateDepartment of Environmental Quality found that exempting all oldervehicles was not acceptable, at least not from a pollutionstandpoint.Motorists in Maricopa County are not quite so lucky: The EPA orderexempts only collectible vehicles; motorcyclists still will have to gothrough the testing.

Both areas of the state have had testing programs for years to complywith federal air-quality rules, particularly as they relate to carbonmonoxide and ozone pollution.State legislators voted for the exemptions in 2005. But the law wascontingent on getting the required approval from the EPA the orderthat came Friday.The legislation defines a collectible vehicle as one that is at least15 years old or “is of unique or rare design, of limited productionand an object of curiosity.”But to qualify for the emissions exemption, the vehicle cannot be forday-to-day use. Instead it must be maintained primarily for use incar-club activities, exhibitions or parades, or is part of a privatecollection “and is used only infrequently for other purposes.”And to ensure that, the law also says the vehicle must be classifiedby insurance companies as collectible or classic, a designation thatDEQ publicist Cortland Coleman said means it can be driven only alimited number of miles each year.

The DEQ actually had looked at a broader exemption, studying theeffect of exempting all vehicles at least 25 years old. But Colemansaid agency scientists concluded that would add too much pollution tothe air and endanger Pima County’s status as being in compliance withfederal laws.There already is an exemption for the oldest cars and trucks, thosemanufactured before 1967.

— By Howard Fischer,Capitol Media Services

–from Rogue
Motorcycle Hall Of Fame Member 2005
www.bikerrogue.com

LearntoFlyHereSmall2

PELOSI TARGETS GRASSROOTS FREEDOM OF SPEECH– House Speaker-to-be Nancy Pelosi (D.-Calif.) has pledged to take up alobbying reform proposal that would impose new regulations on speechby grassroots organizations, while providing a loophole in the rulesfor large corporations and labor unions. The legislation would makechanges to the legal definition of grassroots lobbying and requireany organization that encourages 500 or more members of the generalpublic to contact their elected representatives to file a report withdetailed information about their organization to the government on aquarterly basis. The report would include identifying theorganization’s expenditures, the issues focused on and the members ofCongress and other federal officials who are the subject of theadvocacy efforts. A separate report would be required for each policyissue the group is active on. “Right now, grassroots groups don’thave to report at all if they are communicating with the public,” saidDick Dingman of the Free Speech Coalition, Inc. “This is an effortthat would become a major attack on the 1st Amendment.”

–fromRogue

rogue sturgis main street vacant

Photo from Rogue. Main Street Sturgis, rally free.

NOISE SIGNS WON’T TARGET MOTORCYCLISTS–CAREFREE – The town’s controversial new noise-enforcement signs nolonger will target motorcycle riders.

Carefree’s street crew began removing motorcycle figures Wednesdayfrom a dozen signs that threatened riders with fines of up to $750 ifthey violate the town’s 85-decibel limit.

The signs went up Nov. 27 as part of a new program to reducemotorcycle noise in town. Riders must go through Carefree to get tobiker bars in Cave Creek.

Carefree had asked Cave Creek officials to also post the signs, butCave Creek Town Manager Usama Abujbarah refused, calling the signs”discriminatory.”

Scottsdale attorney and recreational biker Craig Simon agreed andhinted that Carefree was setting itself up for a lawsuit.”I guess I was right, for a change,” Abujbarah said.

Carefree Mayor Ed Morgan said he asked for the removal of themotorcycle symbol.

“We don’t want to upset people,” Morgan said. “We want cooperation. Ifthat little motorcycle emblem was making people hostile, then we feltit was best to remove it.”

Matt Dingman, who along with Councilman Lloyd Meyer heads up thetown’s Noise Enforcement Advisory Committee, said the icons wereremoved to keep the campaign “focused on voluntary noise reduction.”

— Thomas Ropp,The Arizona Republic

–from Rogue

on the ridge old riders

BIKERS HONOR FREEDOM FIGHTER AND DEMONSTRATE HOPE FOR CALIFORNIA FUTURE– The ‘Quigmas Party’ was well attended and lacked nothing in the way ofPromise and Hope for the future of motorcycling. Over a hundred bikersattended the party, in Santa Cruz County, in honor of Richard Quigley.The gathering took place Friday night, December 29th 2006 at the SeaCliff Inn in Aptos, California.

Co-hosted by Lyle Fleming, President of the Ghost Mountain RidersM/C, and Red Barron, Bikers Of Lesser Tolerance (BOLT). Friends,family and motorcycle club members were there to Roast Quig and wishhim a happy Birthday, which actually falls on the 25th. Well-wisherscame from all over the state of California and from out of state.

Motorcycle Rights Organizations were represented; BOLT, in additionto American Brotherhood Aimed Toward Education (ABATE) immortalizedQuig and each awarded him high honors. Tony “Pan” Sanfelipo ofWisconsin, National Founder of BOLT honored him with their FreedomFighter Award which was presented by Red Barron, and Joe Schwirian,Chairman of the Board of ABATE of California, honored him with theirLifetime Achievement Award.

Jackie Suthers, State Director for BOLT of Nevada, spoke during the Roast and personal story portion of the party. Her inspiring recount of how she started work in Motorcycle Rights, and how she met Quig were important for the crowd to hear, but more telling was Richard?s insistence that the true inspiration was the people around him, like Jackie, who have accomplished so much with knowledge, courage and the guts to never back down. Jackie restated the BOLT motto, “Compromise is not in our vocabulary.” Kate Wells, Quig’s lawyer and friend for many years was inattendance. Also, Wendy Lascher, the lawyer representing Quig and theother co-plaintiffs in the Civil suit against the CHP came to the Quigmas party.

The participants suing the CHP in the Civil case are Quig, Don Blanscet,Pat Holmes, Red Barron, Steve Bianco; Steve was the only co-plaintiffunable to attend the party. The Civil law suit, filed November 9,2006, will prevent police from enforcing the California motorcyclehelmet law.

To donate support for the Civil law suit against the California Highway Patrol, go to:http://www.strawberryfields4evr.com/JudicialQandA.htmlUse the PayPal button.

–Mark Temple
BOLT – Sacramento CA
President, ABATE
Local 25, Sacramento, CA

johnny n salena

BIKERNET WRITER 2007 WISHES–Hope 2007 is as rich and wonderful for you as I hope it will be for us. We started the year riding, what better start is there for a new year? Nothing special, we just rode around town before ending up at Kent’s shop (Lucky Devils Metal Works). The last shot is one of his parking lot. It was pretty cool. Till next time.

–Johnny Humble and wife

Johnny is a young gun in the industry and we’re going to take him through his first ground-up build for his brother in Iraq. He’s going to build a Sucker Punch Sally bobber in his garage. The project will be featured in HOT BIKE magazine and on Bikernet. The article series is sponsored by R-Max and Sucker Punch Sally.

Johnny is also making mods to his new springer Softail including Hooker Headers, Terry Components Terminal Velocity EFI system upgrade and we’re hoping to replace that stock rear fender with a Heartland kit. Watch for the techs in our Bikernet Garage.–Bandit

johnny

BIKERNET READER NEEDS BIKER FRIENDLY CAMPGROUND IN FAYETTEVILL, AR–Thinking about attending Bikers Blues,BBQ at Fayetteville,AR. Looking for biker friendly campgrounds in that area. We usually stay at Glencoe when we go to Sturgis. Is there anything like that near Fayetteville area?

–Sam
Stottsam@aol.com

mike lichter

Continued On Page 3

Read More

January 04, 2007 Part 1

BIKERNET NEWS FLASH – BASSANI STRAIGHT CUT SLIP-ONS, AMERICAN MOTORCYCLES SPECIALTIES GEL PADS, H-D SPLIT VISION MIRROR, WEIRD SHIT FROM 2006, D&D Q&A AND COOL PAINT FROM JIMS CYCLE PAINT

rogue bike in snow

Photo by Rogue, in Sturgis.

Hey,

This Bikernet Thursday News contains Brotherhood, Bikes, Broads, Bonneville, Bikernet, 5-Ball Racing and other bitchin material. The year is just beginning and already we’re scrambling to build the Assalt Weapan, the World’s Fastest Panhead, write two books, and continue to hammer content into big bad Bikernet.com. That sorta keeps us busy.

BANDIT AND RICK
Rick on the left with Bandit on his ’48 Pan.

So I suppose we should get to the news. Rick Krost, with our frame and suspension consultant Wil Phillips is working on the frame and we should have a roller in three weeks with American Wheels. Then Valerie will fly out for fitment and good food.

Let’s hit it.

jim orange paint set

SHEETMETAL PAINT DEAL OF THE WEEK–Here’s a complete1996 Softail Custom, sheet metal set, painted and ready to rock.

H.O.K. sunset orange pearl, the eye’s have hologram film on them and candy red sprayed on top.It’s original Harley metal.Never been mounted.$1,500.00 plus shipping, no exchange

–Jim
(310) 329-4707
www.jimscyclepainting.com

jims paint face close

JIMS CYCLE PAINT  BANNER

ALBANY, NEW YORK NEEDS HELP–We need some help from you. There was a run, in the Albany New York area, the Sacandaga HOG Group Ride the Saturday after Thanksgiving in which a fellow biker, Rich Weigal went down. I personally do not know all the details of this accident, but family and friends are asking for help. Also, from what I have been told, Rich was a very experienced rider, 20 + years.

If you or someone you know owns a 2006 HD Softail Deluxe and have had any problems with it bottoming out and / or making sparks on corners or tight turns, please contact us at Gypsypashn@bikerbits.info or GypseRse@bikerbits.info or John Adams @ oldfartbiker@netzero.net.

They are trying to collect as much information as possible along with their names so that an investigator may contact them and perhaps view their motorcycles to take pictures of the scratches underneath. This is very important to the ongoing investigation.

The State police are looking more closely at the motorcycle itself and “Chainsaw” is now involved as an (Unpaid) volunteer, independent investigator.

“Chainsaw” is a motorcycle accident investigator for a firm out of Manhattan, New York, for some years now and is rather concerned that this may be an inherent problem with this model of motorcycle.

Any help you can provide in this matter will be greatly appreciated by the family and friends of Rich Weigal.

Please forward this email to anyone and everyone that rides, especially those that ride a 2006 Softail Deluxe.

Thanking you in advance for your help.

Betsy and Trish

–from Rogue

johns gun

READERS SHOWCASE RED SOFTAIL– This bike came from johnsguns@frontiernet.net and it’s clean. He asked if it could be featured on Bikernet. “What do I have to do to get a few pix of my skoot on Bikernet?” He said. “I know this one isn’t the best, but say the word, and I’ll ride up to the hat creek SRA and take some with the creek, etc in the background.”

I’m still wondering what etc. is? We have a section for Readers’ Rides of sorts. Any reader can post his or her own bike feature in Readers’ Showcase department. Then JoAnn Bortles or CrazyHorse will take it from there. So if you have a bike you want to share with the world, don’t hesitate to launch it in the Readers Showcase area or send it to me, Bandit@bikernet.com.

motor 1

BIKERNET ANNOUNCEMENTS–I should do this every week for new readers. If you want to enter our Free Contest Area we will add you to our mailing list. Doesn’t cost a dime to enter and we give away cool shit.

If you dig Bikernet and want to support our vast content, join the Cantina for ten clams. It’s where you can find girls, rare parts, biker books and strange stuff. It’s a special section, but monthly we send money to our writers and photographers all over the world. They keep the content flying into the shop.

Girlad

THE GIRLS OF BIKERNET COMPETITION–We host The Bandit Girls. We host Bikefest and do promotional assignments. We are two girls who bring crowds to events and do stage performances visit our web site @ www.thebanditgirl.net or my site @ www.freelancemodels.com Quick Search 1689The Bandit Girl -Kimberly

d&d Banner

D&D EXHAUST QUESTION OF THE WEEK–Mr. D&D is taking all questions. Send your performance exhaust question to Mr. D&D at http://www.danddexhaust.com/catalog/2006/04/40814b.htm”>Checkout the Interceptor Pipe for improved horsepower and torque numbers.- Rich Duellman

Question – Fuel Injection: Do the fuel-injected models require adjustments with your exhaust?

–Chris Griffith of Maine

Answer: Slip-ons require little or no tuning. Full Systems in addition to High Flow Air Kits will require tuning. Race Tuners, Power Commanders, Factory Downloads, and Zippers ECU units, have been tested on our dyno and have shown superior results.

D & D Banner

Send your performance exhaust question to Mr. D&D at jims chair

THE CANDY CHAIR CHRISTMAS PRESENT–Check out this chair I did for a xmas gift.Tons of candy, ice pearl, pinstriping, gold leaf, and clear.

–Jim

Where’s mine, goddamnit? I thought you were my friend. –Renegade

jims chair

WEIRD SHIT FROM 2006-NOTHING LIKE THIS WILL EVER HAPPEN IN 2007–BERLIN (Reuters) – From the Turkish Airline workers who sacrificed a camel at Istanbul airport to celebrate a job well done to the German who invented snug spray-on condoms, the world was full of offbeat news in 2006. So how do we get the spray-on condoms off…peel??? Ouch!

While “Miss Israel” Yael Nezri was exempted from carrying her assault rifle in the Israeli army because it bruised her beauty queen legs, (she’s supposed to carry her weapons on her shoulders, duh!)

“Mr. Switzerland” Renzo Blumenthal lured lonely women who hate soccer to his country for the World Cup. I want to know his secret!

Careless thieves once again made headlines round the world. A burglar in Germany left behind a vital clue — his finger tip. “We usually find finger prints but it’s not every day that the thieves leave the original there too,” a police spokesman said. It took only a few hours to track down the thief. self explanatory.

A Jordanian salesman was arrested for trying to fleece a money exchanger with a fake ID card bearing a Brad Pitt picture. An Osama Bin Laden ID might have worked.

In Vienna, burglars fled after finding eight severed human heads. A dentist had stored the mummified heads for research. Failed root canals??

Village leaders in India ordered 150 men to dip their hands in boiling oil to prove their innocence after food was stolen. Imagine what they would have had to dip to prove their innocence if they were looking for a rapist.

An Australian man stopped for drunk driving threatened police with a live snake he picked up off the road. look again guys, it wasn’t a snake.

In Cologne, a plastic surgeon cheated out of payment by two women using fake names gave “Wanted” pictures of their enlarged breasts to police. “It’s probably the most unusual ‘wanted’ poster police ever had,” wrote top-selling Bild newspaper, which helpfully published life-size pictures of the boosted breasts. Hmmm, does he do the same when not paid for penis enhancements?

There were tragic moments too. In Hanoi, a Vietnamese man famous on a national TV program for his ability to resist electric shocks was electrocuted while fixing a generator. it was a matter of time

In Rio de Janeiro, a Brazilian man died when he tried to open a rocket-propelled grenade with a sledgehammer. Therefore passing his final test for the Brazilian bomb squad.

— By Erik Kirschbaum

–from Rogue

HD split mirror

NEW SPLIT VISION MIRRORS FOR ALL HARLEY-DAVIDSON MODELS–MILWAUKEE (December 22, 2006) – The exclusive design of the new Split Vision Mirrors (P/N 92190-06, $119.95) from Harley-Davidson Genuine Motor Accessories help minimize blind spots and provide a panoramic rear view of the left and right lane, and the road behind. The mirrors feature a large primary panel for a normal view, and a second, outboard convex panel for a wider field of vision. Perched on a curving, slotted stem and chrome-plated to a brilliant shine, the teardrop shape features a deep embossed “Harley-Davidson” script logo. Sold in pairs, the Split Vision Mirrors fit all 1982-later Harley-Davidson models.

For additional information on Harley-Davidson Genuine Motor Accessories, see your local Harley-Davidson dealer or visit the Harley-Davidson Web site at www.harley-davidson.com. To find a dealer near you, call toll free 1-800-443-2153 in the U.S.A. or Canada.

AMS-Sheepskin-gel-pads_PC1

COMFORT MAX GEL PADS NOW AVAILABLE IN GUNUINE SHEEPSKING COVERS–ANAHEIM HILLS, CA: DECEMBER 27, 2006–American Motorcycle Specialties, USA (www.amspecialtiesusa.com) announces its innovative new line of Comfort Max Gel Pads designed to offer today’s riders unparalleled comfort on any bike, or any style of riding has added genuine Australian sheepskin as its newest cover option. The sheepskin cover provides increased comfort and allows air to circulate, virtually eliminating perspiration.

The comprehensive gel pad line features four different sizes designed to fit any motorcycle seating configuration. At the core of the Comfort Max Gel Pad is an advanced Viscoelastic molded gel used in medical and sports applications. Its unique properties include the elimination of pressure points or “Hot Spots” which can cause rider discomfort. In addition to absorbing vibration, small bumps and road irregularities, it can be preheated or cooled to add comfort in adverse weather.

Comfort Max Gel Pads feature a unique, maximum grip bottom. This rubberized surface prevents the pad from sliding off the seat and does not require the use of permanent straps. Each pad comes with an adjustable, easy-off strap for additional security. You just put the pad on the seat and ride away. When you make a stop, just take the pad with you or toss it in your saddlebag.

Available in five sizes to fit any seating application:
Buddy Pad 11″ x 7″ wide
Medium Pad 12″ x 12″ x 5″
Large Pad 14″ x 11″ x 8″ wide
Jumbo 16.5″ x 12″ x 9″ wide front.
Ortho-Deluxe 18 x 17x 6″

Comfort Max Gel Pads are priced from $69.95 to $124.95 or online at: www.amspecialtiesusa.com

To contact AMS directly, please write to: American Motorcycle Specialties
2944 Salmon River Circle
Westlake Village, CA 91362
Phone (800) 710-7237
E-mail: help@amspecialtiesusa.com

bassani 07 Straight Cut1

STRAIGHT SCOOP for ’07–

BASSANI PIPES STRAIGHT CUT SLIP ON MUFFLERS– fit 2007 Baggers. Featuring an exaggerated “Cannon” design the new pipes provide a Heart-of-Steel image and thunderous note with their unique tunable/replaceable baffle system. Featuring rugged 16 gauge steel construction with a show quality chrome finish the STRAIGHT CUTS make a bold statement with their massive 4″ diameter tips extending 2″ behind the stock fender.

Developed specifically to enhance the appearance and performance of Road King, Road Glide, Dresser and Twin Cam machines running 96″, 103″ and 110″ engines, these awesome mufflers fit precisely and quickly to your stock pipes using factory hardware or for even more punch bolt them up to a BASSANI True Dual Power Curve.

Suggested retail for the mufflers is $419.00. A compatible True Dual Power Curve set up will run another $489.00. Bassani H-D exhaust systems are available exclusively from North County Customs at 866-439-4287 www.bassanipipes.com

Rollinsixesbanner

Continued On Page 2

Read More

The Master Finch

RONFINCH STANDING WITH BIKE
Here's a shot of the bagger mentioned in the article. You'll run across another shot of it below.

Below is mostly the words from an article written by Wilburn Roach for American Rider on Ron Finch's first dresser project. You'll enjoy it and it covers much of what Ron is up to. He's a classic cycle artist.–Bandit

It was my first Bagger,” Ron admitted as if he was confessing to an affair. He's a noted high-priest chopper builder. Baggers denote the anti-Christ to a life-long chopper rider.

“I can't use custom manufactured frames,” Ron said, sparks dancing off the concrete deck around his feet. “I never know where the gas tank will end up.” He barked in a gravely voice referring to his latest rolling metal-art-sculpture coupled to a strong handmade chrome moly frame. “The frame is light,” Ron said, “I could run smaller O.D. tubing and no-one builds a pure swingarm frame anymore. They're all goddamn Softails.”

RONFINCH NORMAL LOOKING RED

“We hard mounted the bags,” Ron said, “but they leaked so we tested rubber mounting.” The front third of the handmade aluminum bags contain fuel. They hold 4 gallons total which will power the light frame and 120-inch Keck motor for over 100 miles. “That's enough for me. I'm ready for a beer stop,” he added.

Ron rode this Keck driven twisted sculpture to Milwaukee from Pontiac, Michigan and to Myrtle Beach 1,200 miles from home. Ron's twisted steel for over 38 years and continues to rock the custom industry with one-of-a-kind creations. In 1965, he created Finch's Custom Styled Cycles, in Pontiac. In 1972, with an expanding clientele, Ron and his wife Ruth, moved to Auburn Hills, Michigan. With a dedicated crew, an artistic eye, genius for sculpting rod and wild painting techniques, he's still behind the torch. “I tig weld,” Ron said describing his welding choice. “I usually have a helper to hold pieces together and prefer team work.

It takes three of us to bend, mark, cut and weld. I tack most of my material and have someone back-up my welding. It don't trust myself.

Hell, I would prefer to braze everything.”

RONFINCH CHECKERED BIKE

I asked him for the notion behind this concept and he coughed, “I always have a design in my mind,” Ron said, “but I never draw anything. I just go for it.” He made the handlebars by hand, the headlight out of cut 2-inch tubing chunks, and modified the Milwaukee Iron fenders. “We widened the rear fender and cut slots in the front which I framed in 3/16-inch tubing.” He built the battery box out of a threshold door vent. “The first battery would barely turn over that big engine,” Ron said, “I finally scored an Odyssey and installed compression releases. My partners hated push-starting me. As soon as the Keck fired it blasted away leaving them lying in the street.”

RONFINCH BLUE BIKE LEFT PRO

He recently sold his shop of 25 years to Home Depot, gathered up all his tools and metal art and moved it into the building behind his house. “We shut the retail shop down,” Ron said, “I build bikes, paint and get to ride more.” He also actively builds metal art sculptures and appliances for whoever wants his artistic touch in their home or office. METALife is the company title. Building everything from plants, animals, gates, bed frames, furniture, fences, even railings, a bridge and a deck, Ron is using his mastery of metal-working toward art. “I'm designing racks and art in a couple of doctor's offices right now,” Ron said. “They're nuts, but if they like my shit, they'll get it.”

When he told me this was the last bike he built for himself, it begged the question, “You're last bike?”

“No goddamnit,” Ron snapped, “Of course not. It took me a while to move my shop, but I'll start another project before long. I'm still building several bikes for customers. Now get off my back.”

RONFINCH PURPLE BIKE RIGHT

I hung up the phone, took another look at this acid trip metallic concoction on wheels and sought solace in the garage behind dark welding glasses, the spark of a surreal torch flame and a cold beer. Inspired to build another ashtray with a burnt piston and an old cam shaft, I snapped the spark lighter. If you want to reach Master Finch, don't grab the phone. He won't answer it. Try his web site: finchscustoms.com.

RONFINCH CRAZY BIKE RIGHT

Just recently Ron competed with Jesse Rooke in a Biker Build-off. “The ride was incredible until we hit the Delaware Bridge,” Ron told me. “My rear wheel bearings blew out.” Original productions was paying $5,000 an hour for helicopter footage and they needed a set of bearings quick. It wasn't the wheel manufacture's fault. As they assembled the bike in record time for the Build-Off competition Ron hammered the rear axle in place only to jar a bearing race out of wack.

RONFINCH RED BIKE RIGHT PROFILE

They contacted Hallcraft for new bearings and were informed that any standard bearing would work. That wasn't the case and the bearing shop wasn't able to replace the set, so they contacted the nearest custom shop, two hours away. “No Problem,” was the response, but when they arrived the parts weren't available.

“But a customer, with the same wheel, came to my rescue,” Ron explained and they were on the road again to the show where Ron and Jesse competed for top honors. Can't tell you what the results are until the show airs.

Rumor has it that he scheduled for another Build-Off in the near future. Hang on.

RONFINCH YELLOW CHOPPER LEFT

–Wilburn Roach

american rider

Read More

January 03, 2007 Part 3

BIKERNET NEW YEARS FIRST SPECIAL REPORTS–LAST CALL FOR FREE IRONWORKS, SCREAMIN EAGLE FOR DYNA FAT BOB, CHRIS KALLAS BIKER PRINTS ON SALE, DOHERTY PHANTOM FILTER, A MOKE AND WHEEL CHROME PROBLEMS.

Continued From Page 2

wheel woes (Large)

DETONATOR WHEELS CHROME PROBLEM IN 2004– The piece on Assalt Weapan turned out very nice and was run over three pages.Naturally I’ll send you a copy and get the mag to do so also if they haven’t already.Read your piece about Detonator wheels in the Sunday post.

They came stock on my 2004 CVO bike, Orange Betty a FLHTCSE and the chrome was bubbling and peeling off in chunks just after the warranty expired.H-D didn’t want to know about it. I’ve junked them for now, maybe powder coat them for use on a future project bike …

–Doc

heater490

ITS 2008 ………. YEAR OF THE W8LESSROTOR …..LETS ROCK THE INDUSTRY — As you know the Charlie Brechtel band is doing a show at Bikernet.com headquarters in Wilmington , Ca.. Sat the 12th of Jan . 10 DAYS , THEN SHOW TIME AT BIKERNET …. A little background info .

The Charlie Brechtel band is one of the headliners at The Buffalo Chip in Sturgis , S.D. this summer, thousands of people camp there, with the biggest and best concerts. A huge attendance that is booked years in advance. Z.Z.Top is also appearing at the same venue in Sturgis . .

Expected at the bikernet.com event are many of SoCal’s finest bike builders . An estimated ???? (could be huge) , motorcycle industry leaders , builders and related industry businessmen are expected The evening is being professionally recorded and taped , then will be presented to Discovery Channel, Speed Channel, etc. for future television airing , music video c-d ‘ s , posters , flyers . etc.

Between band breaks we will be doing live commercials and interviews. I will be there , ON MY HOT-ROD , Thursday the 11th, helping with set-up, clean-up …. We will produce a live W8Less Rotor commercial for the Sturgis Rider Live airing on SRL.com and Bikernet.com Michele Smith with American Thunder is on the guest list also . Michele is the young lady we did the interview with in Bakersfield , Ca. this past summer .. Tens of dozens of people have commented on the interview , usually about Michele Smith first, then the rotors . Darn it ..

Just a note for upcoming biz plan considerations??? Since Nov 2005 we have had a presence as a major sponsor on Bikernet,com. with over 10 million hits per month, globally , with some 11,000 unique users per day.

There may not be a bigger bang for the buck ??? . Bikernet.com has instant GLOBAL access and an instant news outlet. We send news and it will be printed. It’s part of the sponsor program .

heater485

Bikernet.com is also launching an online Metric News Magazine, 15th of Jan, called Bikernet Metric.

The rotors that we have provided for Kip Woodring , RENTON, WA. , the Thunderpress Magazine Gear-head , tech-writer , are being installed and articles prepared by Kip . Kip is also submitting articles to major magazines as well . Thanks Kip … Bandit says he can’t stop without w8less . Note the stop sign in background ……

–Ray
(831) 594-7783

W8less banner

2008 IS GOING TO BE GREAT!– I am in the process of installing two sets of the swing arm retrofit so I have some $, Das a good thing, haha. Have a couple of other jobs as well.

Working on getting ready to go to Cincy for V-Twin Expo. Are you going? I have a possible tech article; I will let you know as soon as I check it out.

Still need a True Dual Exhaust for a 2008 FLHTI. For a Tech Article! I can contact Daytona Twin Tech for a brain box if one does not come with exhaust.

Next month have to service my bike.

–Rogue

MetricLogo_Pencil002

BIKERNET METRIC LOGO UNDERWAY–Here is another go at the engine. I made the lower part more narrow, the circle on the bottom a little bigger and the engine spokes end in points. Let me know if you want me to stylize it more. I’m still playing with what could go on the cylinder cover. I was thinking maybe a pair of devil girls. As for the circle at the bottom, I was thinking about putting a 5-Ball there. What do you think?

–George

Berry

BIKERNET ASSALT WEAPAN TO BE FEATURED IN ACCURATE BOOTH AT V-TWIN SHOW IN FEBRUARY–Went home for Christmas, shot another deer, hired a new employee, finished my Tiki hut, fed my snakes, getting “Bitch Slap” ready for Cinci., working on booth set-up (10×20 and includes you).

Man I am ready for the New Year! XR Knuckle Engine almost ready and will send pics to you. We will have it for Cinci! Wish all of you a very prosperous NEW YEAR! While hunting I developed a new camouflage. It looks like your car keys. Betcha’ can’t find me now.

–Berry

ACCURATE ENG. BANNER WHITE

OLD BABE

THE CONCEPT OF FREEDOM AT RISK IN A WORLD OF SAFETY AND FINANCIAL RISK–“Public sentiment is everything. With public sentiment nothing can fail; without it, nothing can succeed. Consequently, he who molds publicsentiment goes deeper than he who enacts statutes or pronounces decisions. He makes statutes or decisions possible or impossible to be executed.”

–Abraham Lincoln, 1858

This quote was found while researching the power of those forces involved in mandating helmet laws. It’s an article about how think tanks are being used in order to come up with campaigns to sway public opinion. (The keywords search used was corporatism thinktank fear public). There is a section which discusses strategies used by NC to make its’ seat belt campaign a model for other states. These same people who have used their resources to increase seat belt use, with the Click It or Ticket campaign, are the same people who have been blitzing the media in order to sway public opinion regarding helmets. There should be no doubt that highways safety programs in many other states will be looking to follow examples of the NC GHSP in North Carolina if we are unable to turn the tide in 2008.

http://www.mediaeva luationproject. org/MobilizingWi ll.pdf

I recommend taking some time to read it through, because it shows what those who oppose mandatory helmet laws are up against. It may also include some skills we can get good at.

Among other things, it asks, and attempts to answer the question:Why are some social problems defined in terms of “poor behavioral choices” of individuals while other problems are blamed on the unhealthy business practices of companies that manufacture harmful products or the governmental agencies that regulate them?

In NC, our media is very reluctant to print our news releases, or to air our side of the helmet issues, but they jump on a release by the NC DOT in a flash, even when it contains misinformation. We are going to have to contend with this in 2008 by preparing media statements and press releases, and discredit theirs. “Honest Abe” is correct. It is not just the legislative building where we lose our rights, as evidenced by the NC GHSP attempts to bias judges. It is also public opinion, greatly influenced by the media where we tend to lose. Legislators often make their decisions based on what they hear from the public. They use their regulatory power to offer up the rights of hundreds of thousands to decide, rather than face an outcry by one family member losing a loved one, because the government did not adequately protect.

Many legislators believe the primary duty of government is to ensure safety. There is doctrine from our founding fathers to support their safety idealogy. Safety nannies began including safety from ourselves, and those “poor behavioral choices” some of us might make.

Fortunately, there are still some legislators, who interpret the governmental responsibility for safety to be restricted to safety from invading enemies, safety from an intrusive, overbearing, oppressive government, and public health involvement to be restricted to combating real and verified contagious epidemics. Some good lawmakers even insist that no laws should be made unless there is overwhelming constitutional basis. Those candidates will need our support in 2008.

In NC, over the last few days, the media has been reacting to NC DOT media blitzes about changes to the helmet laws. A few are mentioning our protest actions in several counties. Some of us have been going into forums, and have made some extremely persuasive arguments that constitutional rights are in serious jeopardy. The helmet law is vague, and will still be arbitrarily enforced, because the standard targets individuals. In opposition to us, those who support this assault on our liberties, have been indoctrinated to blame all motorcycle fatalities on “poor behavioral choices”, including the fact that we ride motorcycles rather than automobiles and SUV’s, which are mainstream.

We’ve heard “motorcycle enthusiasts” say they love their helmet, and how it saved their life. US DOT Secretary Mary Peters, a GW political appointee is saying it. Some enthusiasts, as well as some bikers, are convinced helmets saved them several times. Some of them support our right to decide, while others do not understand any concepts of freedom. We say go ahead and wear one (caution: they are not all that the government claims), just don’t force a helmet onto me. They do not understand the difference between rights and privilege, and wouldn’t know the constitution if it slapped them in the face. I found the following which might explain something about those people who swear by helmets:

Research by Wasserman et al. in 1988 * involved the questioning of cyclists on the streets as to whether they had hit their heads in the previous 18 months. This had happened to 20% of helmet wearers vs 2.7% of non-wearers – a seven-fold increase. Such results consistently help to explain why most helmet law supporters believe a helmet has saved their life – it’s partly because they are more likely to hit their heads. * (Wasserman, R.C., Waller, J.A., Monty, M.J., Emery, A.B. and Robinson, D.R., Bicyclists, helmets and head injuries: a rider-based study of helmet use and effectiveness, American Journal of Public Health, 1988)

There are people who state, as though fact, that everyone who rides without a helmet is guaranteed to eventually die from head injuries in a motorcycle crash. I heard the same thing from people who are against smoking, and the many other “poor behavioral choices” I make. So, which is it going to be? I can’t die from them all. At least, I won’t die from eating fast foods. I know I shouldn’t be saying this on the first day when many folks are struggling through the first day of some resolutions, but if we were to all give up everything we love, perhaps we will all die from boredom.

In 2008, there are several important fronts we will be working. One of them must be public opinion, but charity runs and picking up trash from the side of roadways to show we’re nice people is not going to do one single bit of good. We’ll need to get very good at blitzing the media, often, with messages that open peoples eyes as to where the bureaucrats claim to do well, when they are really not. In particular, the public who does not support our freedoms, will need to know the skiers and snowboarders will be next, with helmet checks at the southeast chairlift. More roadblocks will be appearing, with checks of “vhere are you papers” at state lines. The only ones free to travel about the country will be undocumented aliens, because without papers they will be the only ones without tracking devices.. There are proposals for gun owners to use smart guns which can only be used if the shooter has the correct chip implanted under the skin of their forearm. Eventually intelligent highway systems may outlaw not only motorcycle riders, but automobile drivers as well.

The line in the sand we have drawn that says no to mandatory helmet laws, is not just about helmets. It has much wider implications for freedom, if we can turn the tide. We will need the public to become concerned about the loss of each right, one by one, which has been increasing exponentially for the last 70 years.

See you at the protests, on liberty rides, in the courts, and at the voting booth,

–jan
jan@bikersusa.org

RR-Moke

RARE MOKE DISCOVERED IN AUSTRALIA–Bought this fully restored Mini “Moke” today (for Annie of course – shish!she doesn’t know yet!!!)

Be a bit of fun during summer!

–Uncle Ray

Filter and tank

DOHERTY PHANTOM FILTER– Anyone with a custom scooter they actually intend to ride has labored over where to hang an oil filter. Fret no more. Doherty Machine has just introduced a filter assembly that is fully functional and totally “out of sight.”

The PHANTOM OIL FILTER is designed for horseshoe style tanks, but adapts easily to fit a variety of applications where at least 2 1Ž2″ of flat mounting surface is available. The unit itself consists of a bolt-in or weld-in, mounting flange (both are included), and screw-in filtration assembly. Caps are fit with a barbed, oil return line fitting at the side for unobstructed seat clearance. All bolt-in sealing surfaces are O-ringed and the unit makes use of OEM style filter elements. Installation requires simple drilling of filter access hole and flange mounting bolt locations where applicable.

Oil Filter

The PHANTOM FILTER is precision machined from billet aluminum and steel with aircraft grade hardware. This unique filtration system allows you to maintain a clean appearance while protecting your engine’s vitals.

The PHANTOM OIL FILTER kit retails for $219.95 and is available direct from Doherty Machine by calling 800-956-9409. Catch Doherty on the Web at www.DohertyMachine.com

Doherty banner

THE TECH MASTER PABLO CHECKS IN– How da hell are you. By the time you read this it will probably be 2008, Happy New Year I think your doing a hell of a job. Remember no one gets out of here alive so have fun, ride hard, live free and fight for what you believe. Family freedom, right to ride free, GOD, oh did I say that,freedom to feel how you want, happy, sad orwhatever. GOD BLESS US ALL. May the sun always warm you, may the wind be friendly, and may your beer be cold and your jack smooth.

— A BOTHER IN THE WIND OLD HIPPIE

girls
Click here to enter Bikernet free contest area and receive Bikernet Updates.

READER RECEIVED GIFT BOX–Hey, thanks for the cool stickers and book sent over Christmas. Greatlyappreciated. Could of used a cool t-shirt, xl, but what the hell, freeis free. Great site, glad I joined and gave you money. Well worth it.

Stay cool,
–Rocky Boatman

More boxes are headed out next week.–Wrench

blackmarket

CHRIS KALLAS BIKER PRINTS– Chris Kallas captures the spirit and freedom of riding in all if his high-quality color lithograph prints. They are great for your office, den, garage or shop. They add that feeling you get by throwing a leg over your sled.

These are limited edition prints that are produced on 80# acid free cover stock. Get your inner-biker fix right here.

SE Fat Bob Exhaust

NEW SCREAMIN’ EAGLE SLIP-ON MUFFLERS FOR DYNA FAT BOB–Throaty, Street-Legal Sound and Fresh Styling from Harley-Davidson.

MILWAUKEE (Nov. 30, 2007) – The new Screamin’ Eagle Street Performance Slip-On Mufflers for Dyna Fat Bob (P/N 80674-08, $349.95) from Harley-Davidson Genuine Motor Accessories produce a throaty tone and offer bold, custom styling. Each muffler has a ballistic inlet shape and embossed “Screamin’ Eagle” logo. The black Blunt Revolver end caps feature cut-out chambers that expose and contrast with the mirror chrome finish of the muffler body. These mufflers are 50-state street legal on stock-displacement 2008 FXDF Fat Bob models. Installation requires separate purchase of two muffler clamps P/N 65283-94.

For additional information on Harley-Davidson Genuine Motor Accessories, see your local Harley-Davidson dealer or visit the Harley-Davidson Web site at www.harley-davidson.com. To find a dealer near you, call toll free 1-800-443-2153 in the U.S.A. or Canada.

bikecop T

LAST CALL FOR FREE ISSUE OF IRONWORKS MAGAZINE–About two months ago we sent out a mailing offering a FREE copy of IronWorks Magazine to any and all who’ll fire us their physical mailing address and the deadline for us to submit those address’s is drawing near, so if you’re interested in getting on the mailing list all you need to do is respond.

NO tricks, NO catches, just a FREE copy of the best publication in the American V-twin market. You can consider it a Christmas present from DOUGZ Custom Paint & Fabrication because we’re just nice people, or you can consider it sucking up. Either way you get a FREE issue!

We need to submit the address’s to IronWorks by Jan. 10th so send us yours by then or you’re shit outta luck!

Doug Wozney
DOUGZ Custom Paint & Fabrication LLC
2323 Palace St. La Crosse, Wi. 54603
(608) 783-3684
mailto:doug@dougz.com
http://www.dougz.com

Tiny Bikernet logo

ANOTHER BIKERNET WINNERS SPEAKS UP–I received one of the Christmas care packages and wanted to say, Thank You. It was a great surprise with some cool stuff and good reading material to pass time till the snow melts.

Bikernet rocks.

–Rick Fisher
aka Fish

AW and Team

THERE YOU HAVE IT, FIRST THURSDAY NEWS IN 2008–Not bad, if I don’t say so myself. Here’s my rundown for the Assalt Weapan for January until March. Jim Waggaman, at Air Stream Studios is finishing the tank adjustments, repainting the front fender and rear panels right now. The Pegasus crew and I will complete the Pegasus installation and dial in the wiring.

Kent
Kent Riches, of Air Tech Fairings, with our new Assalt Weapan unit.

I just picked up a complete fairing at Air Tech Studios and will begin building mounting brackets. I’m going to display the bike at the Grand National Car Show at the end of January then immediately ship it to Accurate Engineering for Dyno tuning. Then Berry, at Accurate, will haul it to Cinci for the Dealer show, then to Daytona for the Seminole Roadhouse Display. From there we hope to run the beast at the Maxton Mile.

kent2
Kent designed streamliner bodies for Easyriders, Bob George, Vesco and many of the fastest car guys in the world. He’s currently making the new Ack Attack streamliner body after last year’s wreck on the salt.

I just called Leif Gustaffson at his custom windshield shop in Florida and discovered that he’s closed until the 7th. Holy shit. We were turned down by the Fisher Foundation, because of the questionable Bikernet Content and we will reach out to the USO for a Veterans Charity to support.

So our Veterans’ program is not dialed in, but we’re working on it to raffle the Assalt Weapan off and do the utmost for veterans and take the winner to Bonneville in ’09 as a member of the 5-Ball Racing team. There you have it. Some of our kick-off goals for ’08. Hang on.

Ride Forever,

–Bandit

Big Dog Banner

Read More
Scroll to Top