“Anti-reversion (exhaust) technology has been used in internal combustion motors for many years. Many land-speed, and other motorcycle competition records have been established by motorcycles and other vehicles equipped with anti-reversion devices,” says Samson. Here is how Samson Torque Cones function: When the exhaust valve opens, and the piston is on the exhaust stroke, the exhaust gases are expelled in a donut shaped sine-wave gas-pulse into the exhaust pipe, away from the exhaust port. When this sine-wave gas-pulse exits the end of the exhaust pipe, it bounces. This creates a reverted gas-pulse that travels back up the pipe towards the exhaust port. If the exhaust valve is open, as with some cam profiles, these spent gases can then enter the combustion chamber and prevent a clean and complete intake charge. This also disrupts exhaust flow. Motor efficiency is therefore reduced, which in turn reduces both horsepower and torque.
With Samson Torque Cone installed, the reversion exhaust gases are blocked from entering the combustion chamber. At the same time, a profound extraction effect is created, allowing any motor to breathe at its maximum potential. ‘Installing Samson Torque Cones gives an instant, perceptible improvement in throttle response, horsepower, and torque”, says Samson. To get your very own Samson Torque Cones for arm stretch torque, see your local Samson Dealer, or contact Samson direct at 605-720-7676. click on the banner below for more information.
