Hey,
We are living in strange times. Take a look at history and the weird shit impacting humanity, like wars. We are right there again and most folks go about their days, ho hum. Some brave souls are sounding the alarm, like Bob Kay with the IMA, Chris Callen of Cycle Source, Marc Morano at Cfact and Climate Depot and Greg Wrightstone of the CO2 Coalition. There are more and the numbers are growing.
It’s a war, but mostly of words and incarceration. If you don’t agree, you get arrested. The actions of the folks who want the war and destruction include open borders to control elections, killing our kids with fentanyl, ruining cities with crime and homelessness and punishing you because of your SUVs or motorcycles. The best recent historic example of this was right after WWII when the threat of communism caused a guy named Senator McCarthy to attempt to destroy free speech and jail anyone who muttered the word communism. Google it, look it up on Wikipedia.
Let’s see what’s in the news.
The Bikernet Weekly News is sponsored in part by companies who also dig Freedom including: Cycle Source Magazine, the MRF, Iron Trader News, ChopperTown, BorntoRide.com and the Sturgis Motorcycle Museum.
BREAKING NEWS–SEMA Advocacy Leads to EPA Delaying Most Aggressive Tailpipe Emissions Benchmarks.
After advocacy from the automotive community, the U.S. Environmental Protection Agency (EPA) is delaying its most aggressive tailpipe emissions reduction requirements from model year 2027 to model year 2030. The EPA’s final rule also slightly increased the average tailpipe emissions for light-duty vehicles, increasing the standard to 85 grams/mile from 82 grams/mile for model year 2032.
While the agency’s final rulemaking provides automakers with additional time to ramp up production of zero-emissions vehicles (ZEVs), currently, only electric vehicles (EVs) and five plug-in hybrid electric vehicles (PHEV) meet the easier 85 grams/mile standard. It is estimated that 67% of new vehicles sold would have to be EVs by 2032 to meet this standard. Automakers could also comply with the final rule if EVs account for 56% of new vehicle sales and PHEVs comprise 13% of model year 2032 sales. The Specialty Equipment Market Association (SEMA) opposes the EPA’s final standards for model year 2027 to 2032 light and medium-duty vehicles, which ultimately still forces automakers to sell EVs and PHEVs to comply with this rulemaking and further limits internal combustion engine technology options.
–SEMA
EASTER SPECIAL SURPRISE FROM THE EMPIRE OF THE BUFFALO CHIP–Pay attention and be ready to scramble to the Sturgis Rally.
These specials will end soon.
TODAY’S EASTER SPECIAL
Additional VIP released for Kid Rock!
Thursday, Aug. 8, 2024
(No code needed)
Additional VIP released for Jelly Roll
Tuesday, Aug. 6, 2024
(No code needed)
You won’t find more for less anywhere else.
That’s one low price for concerts, entertainment and camping.
Concerts are Free with Campground Admission
The 2024 Sturgis Rally Is Gonna Rock ‘n Roll
THE QUOTE OF THE WEEK–
“If you can’t explain it simply, you don’t understand it well enough.” ~ Albert Einstein
Epoch Times
A RUSH OF 100-WORD FICTION SUBMISSIONS–QUIG
I took the first Piedmont exit off I-90, rolling the Chieftain onto the parking lot of Matt’s Place, the front tire of the classic facing the interstate. The t-shirts stapled to the wall said Matt wasn’t there, he was fishing.
Silently, I tipped my champagne of beers to the Blackhills and whispered to my friend that I missed him. It’s been four years now since he left, yet I still hear his voice, his laugh and wish I could cast a fly like he could.
Time goes by, the days slip away fast, the best leave us first. Enjoy Miller time.
–JJ Spain
HELP WANTED AT STROKERS DALLAS—
Mechanic who can work on Harleys & Classic Cars. This is a great opportunity for a Hardworking person who wants a good job and they Love to come to work every day!
Shoot me an email rick@strokersdallas.com or call me 214.357.0707.
Thanks!
–RF Rick Fairless Strokers Dallas
Strokers Ice House
Punch Wally
POWERSPORTS BUSINESSES SPEAK OUT–Powersports Businesses Large and Small Asked to Speak Out in Washington
“On behalf of the MIC Board, I want to encourage everyone to join us at the Capitol Hill Fly-In, April 29-30, to help make our voices heard in Washington,” said MIC Chair Derek Brooks, Motorcycle Product Line Manager of Yamaha Motor Corporation, U.S.A. “We will be speaking with lawmakers about key policy issues facing powersports including protecting and expanding OHV access, taking a reasonable approach to PFAS legislation, and pushing for an end to tariffs on crucial powersports parts and products from China.”
The Fly-In is not just for senior OEM executives. Dealers, distributors, retailers, insurance companies, and allied services attend. Meetings and receptions provide valuable opportunities to network and discuss powersports priorities, and for industry peers to get to know each other better.
–MIC
STURGIS MOTORCYCLE MUSEUM UPDATE— Honor the ride, build the legacy.
A pilgrimage to Sturgis isn’t complete without a visit to the iconic Sturgis Motorcycle Museum & Hall of Fame.
The tight, small museum staff with a ton of projects on hand are also working hard to produce an annual magazine in conjunction with the city of Sturgis.
They’re not cranking out any ordinary mag, but a resource guide to help any traveller who comes to the Black Hills. The response has been fantastic and we have expanded the size of the magazine twice and it could receive an additional 16 pages. Hang on.
Scott Jacobs turned in his magnificent tribute to Hillclimb motorcycles art piece for the cover yesterday. This weekend, I will write the story behind the inception of this piece with the help of Dale Walksler R.I.P. and the Wheels Through Time Museum.
We are reworking the Museum Website with several additions including fund raising forms and news columns. Each bike and display image will contain a description and include fresh new photography.
Here’s our second museum expansion concept drawing from Daniel James. Very cool, but we have one more to go before we meet with the city of Sturgis and discuss our options.
Speaking of the City, members of the Museum board will soon attend a meeting with the city leaders.
The town of Sturgis is voting on the AFT race series to take place the last weekend of the Rally April 9th. There’s a lot of buzz going around about it.
We will be selling individual copies of the magazine through the web site and every business in Sturgis, Spearfish, Deadwood and Whitewood will received a copy and the opportunity to buy more.
It’s never dull around the Sturgis Motorcycle Museum.
Whether you’re a seasoned rider, a history enthusiast, or simply curious, a visit to Sturgis Motorcycle Museum at 999 Main Street, Sturgis, SD 57785, promises an enriching experience.
–Bandit
BAKER DRIVELINE DEALER OF THE MONTH–Get Lowered Cycles
BAKER Dealer Since 2020
Michelle had an insightful conversation with Mike from Get Lowered Cycles, exploring the diverse offerings of their shop based in Warminster, Pennsylvania. Specializing in customized Harley-Davidsons, they excel in performance enhancements, ranging from meticulous dyno tunes to expert motor upgrades. Since its establishment in 2009, the shop has evolved into an e-commerce business, in addition to its brick-and-mortar store. While they primarily work on newer models, they still service older Harley-Davidson bikes and undertake several custom projects every year.
With a team of three on the service side and a total of eight across various roles, Get Lowered Cycles prides itself on efficiency and prioritizes American-made products whenever possible, reflecting a commitment to quality and customer satisfaction.
PIRELLI NAMED– Series Partner for 2024 FIM Mini Cup USA Series
Pirelli’s DIABLO Superbike Range and the FIM Mini Cup USA Series Will Serve as the Pathway to the FIM MiniGP World Series
Pirelli, the global leader in high-performance tire manufacturing, is thrilled to announce its partnership with the 2024 FIM Mini Cup USA series, underscoring its commitment to supporting grassroots motorsports and nurturing the next generation of racing talent.
The FIM Mini Cup USA series will feature thrilling competition in the Ohvale 160 and Ohvale 190 classes. These classes will serve as qualifiers for aspiring riders aiming to secure a coveted spot in the prestigious FIM MiniGP World Series, which will take place later this year in Valencia, Spain.
As part of its partnership, Pirelli will supply its renowned 10- and 12-inch DIABLO Superbike slick range as the spec tire for both classes, ensuring all competitors have access to world-class tire technology that prepares them for the challenges of the international racing stage.
The FIM Mini Cup USA series consists of five rounds, with three rounds running in conjunction with the ASRAChampionship rounds:
1. Summit Point: May 25-26
2. Virginia International Raceway: June 22-23
3. Carolina Motorsports Park: July 20-21
4. Pittsburgh International Race Complex: August 17-18
5. Virginia International Raceway: September 7-8
“Pirelli is honored to partner with the 2024 FIM Mini Cup USA series, further reinforcing our commitment to fostering racing talent at every level,” said Oscar Solis, senior racing manager, Pirelli. “We believe in providing racers with the best tools and technology to succeed, and our involvement in this series underscores our dedication to supporting the growth and development of motorsports.”
In addition to its partnership with the FIM Mini Cup USA series, Pirelli recently became the exclusive tire supplier for the Moto2 and Moto3 World Championship classes in 2024. The partnership has already yielded remarkable results, with riders setting lap records in both pre-season testing and the opening rounds of the 2024 season.
The FIM Mini Cup USA series serves as an essential stepping stone for American riders aspiring to compete in the Moto2 and Moto3 World Championships, offering invaluable experience and exposure on the path to international success.
’69 SHOVELHEAD GIVEAWAY–We know giveaways are pretty played out BUT how’s one more for a laugh?!?
Located in the UK is this ultra-sweet 1969 Generator Shovelhead chopper owned by our very own Scott Horsey Walker for the last 4 years. It’s a big bore stroker that absolutely rips! It’s just had a visit to the master Toshi for a tune up so it’s as strong as a bast!
OG 4 speed gearbox that was fully rebuilt 500 miles ago, new Butts Seat, Dayten derby cover and flamingo shifter, Juniors Hand Made jockey shift, recently rebuilt OG front brake, OG hummer dished tank etc etc.
There are 300 spaces available and we will draw as soon as all are gone or at the 101 Show in July.
We will assist with Global shipping.
NEWS FROM THE MASTER OF LIGHT–Artist David Uhl
David recently completed a new piece for Harley-Davidson. Prints were used as the awards for the Motor Company’s Bar and Shield awards for top performing dealerships.
We are pleased to announce that David will be offering 6 (that’s correct, only 6!) special hand-embellished versions. Definitely a first come-first served scenario on this one!
“Bobber Blasphemy”
In David’s words, “I was contacted by the Motor Company a while back to produce a work of art to be used as an award for exemplary Dealers. The program is called the “Bar & Shield award”. The winning dealers would receive a framed canvas print. My initial thought was to speak to the extensive history of the Dealer Network.
Since I love the Knuck/Panhead era most I decided to feature that era of bike. This oil painting depicts an early American Harley dealer reacting after seeing a trio of motorcycles he had sold, only returning with a whole lotta missing parts!”
David will take the canvas color proofs and paint over them, creating 6 unique pieces. With these, he includes a special letter to the recipient (in his really cool calligraphy handwriting).
Please let me know ASAP if you’d like to reserve one of the six. You can respond to this email or call me at 303-913-4840.
Thanks,
–Greg Rhodes
International Sales Director
David Uhl Fine Art
Uhl Studios
303-913-4840
MORE ON THE CO2 COALITION–
But the hidden power of the CO2 Coalition resides in our large number of active members who publish, present, and speak to advance our message.
This year, our membership has increased to more than 150 distinguished colleagues. We have added 33 new members so far in 2023, including these notable individuals:
•Dr. John Clauser, Ph.D., was recently added to the CO2 Coalition’s Board of Directors. He is the recipient of the 2022 Nobel Prize in Physics. In a recent lecture to a Korean conference on Quantum Mechanics he stated that “the IPCC is one of the worst sources of dangerous misinformation … I believe that climate change is not a crisis.”
•Lt. Gen. Thomas P. Stafford – Gen. Stafford is best recognized for his efforts in space, having piloted numerous missions, including Gemini 6A and 9A. He was commander of Apollo 10 and Apollo-Soyuz Test Project. His proudest achievement is initiating and leading the American stealth program that culminated in development of the Advanced Tactical Fighter and the F-22A Stealth Fighter.
These and our other distinguished members provide scientific input and have proved invaluable in helping to create our commentaries, educational initiatives and publications.
Our members are like a small army of unpaid staff working tirelessly to advance our message. They are a force multiplier allowing us to punch well above our weight class.
When we receive an op-ed, we run it through our editorial process and then find a top-rated site to publish it.
These online sites have included Real Clear Energy, Washington Times, American Thinker, Washington Examiner and many more. After publication, our commentaries are shared widely on websites and newsletters of our allies in the cause.
The commentaries, interviews, publications, and op-eds have put our message before more than an estimated 20 million people this past year. And with your continued support, I believe this number will grow in 2024.
STURGIS MUSEUM EXPERIENCE–
Keith Ball’s Assalt Weapon, Sturgis, South Dakota
While exploring the Sturgis Motorcycle Museum, Hall of Fame & Gift Shop, I got to meet Keith “Bandit” Ball whose motorcycle, Assalt Weapon, set a record of 160 miles per hour at the Bonneville Salt Flats races in 2007.
Keith’s bike, on loan to the museum, was being transported to Alabama to be worked on in preparation for this year’s Bonneville race and the process of moving this one-of-a-kind motorcycle was quite something to watch.
“Keith Ball grew up in Long Beach, CA, and has since travelled the world with the Navy and has worked as an editor and publisher for various big-time motorcycle magazines and publications. Keith has also written various novels, been featured in movies, TV shows, and has received many awards for his talents. In 2006 he was inducted into the Sturgis Motorcycle Museum Hall of Fame, and shortly after set two motorcycle land speed records.”
Learn more about Keith Ball on his website, BikerNet.com and on Instagram @banditsbikernet.
–Christina
BRAND New Bikernet Reader Comment!–
THE MOVIES BIKERNET WEEKLY NEWS for March 21, 2024—click here to read it
Nice flames just as good as the old journeyman painters. Mine was done by Fats and my bro back in the ‘70s was done by the Candyman. I love ghost flames myself. Y’all keep up the great work. Your articles always amaze me.
— Gearhead
Torrance, CA
CALL TO ACTION–U.S. Senate Bill S. 3094
Wednesday, the U.S. Environmental Protection Agency (EPA) released its final rule on tailpipe emissions. The plan calls for greenhouse gas emissions limits for the 2027 through 2032 model years for passenger vehicles. The original plan would have required 67% of new light-duty car and truck sales to be electric by 2032. After pushback from numerous groups, hybrids became included in the calculations and targets were slightly lowered. Nevertheless, over 50% of cars for sale in less than a decade, will need to be electric.
Last year the U.S. House of Representatives passed the Choice in Automobile Retail Sales (CARS) Act with bipartisan support. The vote was 221-197. The bill prevents the EPA from enacting these rules, thereby protecting the Internal Combustion Engine (ICE).
Unfortunately, the Senate refuses to act. Only 37 U.S Senators are currently supporting the companion bill, S. 3094. If you care about preserving the Internal Combustion Engine, now is the time to act.
Tell your Senators to push back against the mandate for electric vehicles. Click the Call To Action button below! Add your voice to those that want to defend our lifestyle.
There is speculation that new bills will be introduced to protect the Internal Combustion Engine but we must keep up the pressure!
If bikers do not stand up now, will they hear us later?
–MRF
ANOTHER New Bikernet Reader Comment!–New Rev Tech 100-Inch Engine
https://www.bikernet.com/pages/New_Rev_Tech_100Inch_Engine.aspx
Looks like a great place to study the engine.
–Steve Rochester
Kemah, TX
“Rev Tech engines by Custom Chrome had a tremendous reputation for reliability and performance. Don’t know if they are still around.” –Bandit
The 100 Words Survives into 2024
Yup, we are still pushing your creative endeavors into high gear with our monthly 100 word limit fiction contest. Read the 2024 entries at:
https://www.bikernet.com/pages/Bikernet_100_Word_Fiction_Contest_2024.aspx
Prolific author J J Spain aka Jeffrey has shared some valuable gems that fit the motorcyclists’ mold and evoke emotions we are all very well familiar with.
For his work “Little Lady on the Road” for January 2024, we pick him as the winner yet again. He might seem to be the first and last man riding with his creative spirit and adventurous mood.
Many congratulations to JJ Spain. You win one more bag of swag from 5-Ball Racing shop.
Meanwhile, all you fellow journeymen need to grease up your custom building imagination-engine and hand-bang a new story within 100 words limit. As they say, it’s easy–just get a piece of paper and bleed.
Okay, just kidding– send us joyous adventures, emotional adventures, naughty adventures, aimless adventures, destructive adventures, misadventures, stories of the old or the young, and even genre based futuristic, paranormal, crime infested, fantastical or funny fiction. Your mind’s eye is the limit.
–Wayfarer
Chairman
100-Word Contest Awards Committee
Bikernet.com
[page break]
AHEAD OF MOTORCYCLE SAFETY AWARENESS PERIOD—
- MassDOT Reminds All Motorists Roadway Safety Is a Shared Responsibility
- Operators urged to wear visible clothing, obey speed limits
- Vehicle drivers reminded to “look twice” when changing lanes and turning
- Statistics show 58 motorcycle operator deaths in Massachusetts in 2023
As the spring approaches, Governor Maura Healey has signed a Proclamation, designating the period of March 23 through April 1, 2024 as Motorcycle Safety Awareness Period. In addition, the Massachusetts Registry of Motor Vehicles’ (RMV) is raising awareness for motorcyclist safety, reminding all travelers that roadway safety is a shared responsibility, that vehicle drivers should look twice for motorcycles when pulling out onto roads and changing lanes, and motorcycle operators should be visible and obey the rules of the road.
“Safety must be a priority for everyone, but especially for vulnerable road users like motorcyclists,” said Transportation Secretary and CEO Monica Tibbits-Nutt. “We know with the warmer weather ahead, more motorcyclists will be on the roads and the operators and other drivers around them have a duty to stay alert and be mindful of all traffic laws designed to keep everyone safe.”
“As part of Motorcycle Safety Awareness Period, the RMV reminds all motorists that safety demands an effort from vehicle operators and motorcyclists alike,”said Registrar of Motor Vehicles Colleen Ogilvie. “All motorcyclists need to be properly educated and licensed, regardless of how experienced they are in operating other vehicle types. Wearing protective gear and bright, visible clothing is also very important and should be used at all times, regardless of the duration of your trip and the roadway conditions.”
Data on MassDOT’s crash data portal,IMPACT, shows there were 58 motorcycle operator fatalities across Massachusetts in the year 2023. Additionally, there were three motorcycle passenger fatalities. Motorists and other members of the public are encouraged to access the interactive data portal, to see where different types of crash incidents have taken place and how the data compares from year to year.
Motorcyclists face an increased risk of severe injury and death when crashes occur. The two most common roadway fatality crashes are single-vehicle crashes that involve a motorcycle driver failing to negotiate a curve in the road, and crashes involving a left-turning vehicle striking a motorcycle.
Motorcyclists are encouraged to be prepared and participate in educational training courses that are offered through the state-sponsored Massachusetts Rider Education Program (MREP). The program seeks to increase rider skills and safety on the road by providing quality rider education and training to both novice and experienced motorcycle riders. The program is specifically designed to assist riders of all levels and to promote the safe operation of motorcycles.
Waiver courses include Basic Rider Course, Basic Rider Course 2, Returning Rider – Basic Rider Course, and 3 Wheel – Basic Rider Course. MREP also offers additional non-licensing courses for motorcyclists that already have their motorcycle license.
NEWS FROM CFACT AND CLIMATE DEPOT–Climate Agenda Imploding
· JP Morgan Chase, Vanguard and BlackRock pull out of the UN “climate alliance” that was set up to finance Green energy ESG ventures by woke companies.
· Farmers all across Europe stage a series of massive protests against Green plans to make their continent “carbon neutral” or “Net Zero” by 2050.
· Attorneys general from 25 states successfully push back against New York Stock Exchange effort to create “Natural Asset Companies” that would give Biden the means to accomplish his radical “30×30” land grab.
· The companies Equinor, BP, and Orsted withdraw their efforts to construct massive wind projects off the coasts of New York and New Jersey.
WOW, ANOTHER WIDOWS SONS New Bikernet Reader Comment!
The Story Behind the Notorious Widows Sons
https://www.bikernet.com/pages/The_Story_Behind_the_Notorious_Widows_Sons.aspx
Hi !! As a state secretary of the Grand Chapter of Puerto Rico of Widows Sons, I feel really happy reading articles like this because they show who we really are and what we do !!
Joining the WSMRA Has been one of my best decisions and experiences of my life. It has been a way to expand my Masonic knowledge and principles beyond the lodge.
Also, the WS have given me the opportunity to meet people from around the US and the world and learn from them. Keep up the great work and thanks, in the name of all my brothers, to show the Widows Sons as we really are.
WSFFWS
–Felix A Ruiz
Ponce, PR
5-BALL TATTOO ART EXTRODINAIRE –
Frank Ball Jr. is rapidly becoming a master. His new stylish shop is in Venice, California if you want an appointment.
HISTORY LESSON FROM COMPETITION DISTRIBUTING–Maldwyn Jones & his Merkel Jefferson racer.
Jones was a phenomenal racer and engineer who started working for the Merkel company at a young age. He stood out front of the factory asking Joe Merkel for a racer position. Merkel told him no but gave him a job in the repair department.
Maldwyn loved racing and would work on his own racers crafted with leftover “junk” in the basement of the factory. He stated Joe Merkel knew what he was doing but never came to inspect. He would ask Joe to race for the moco but he would not support Maldwyn.
Jones finally quit the company with the lack of support and went on to race 100 miler in Dayton Ohio on a Thor of his friends. Joe Merkel kid with other employees he would not finish let alone compete. Well, Joe ended up leaving after Maldwyn won three of the 4 races that weekend.
They hired Maldwyn back that next week and it took Mr. Merkel some time to swallow his pride before he would speak to Maldwyn again. The bike in the picture above was crafted by Maldwyn using a Jefferson overhead valve head and a cutoff Merkel cylinder.
He did not have to work in the basement again…
–CD
HARLEY-DAVIDSON LiveWire launches first electric cruiser motorcycle– S2 Mulholland
LiveWire, the all-electric motorcycle company spun out of Harley-Davidson’s electric motorcycle division, has just unveiled its latest electric motorcycle. The new LiveWire S2 Mulholland is the brand’s first cruiser electric motorcycle, and in fact the first cruiser of any major electric motorcycle maker.
It might not look quite like a typical H-D cruiser. Gone are the chrome pipes and leather bar tassels. Instead, LiveWire is calling the S2 Mulholland a “performance cruiser”, and it’s got the specs to back that up.
A 3.3 second 0-60 mph time adds sportiness to the laidback cruiser geometry with taller bars and a more relaxed-looking ride. The use of a 19-inch front wheel and 17-inch rear also gives the bike a squatter rear end.
There’s no cruiser frame, but that’s because there’s not really a frame at all. Instead, the S2 Mulholland uses the Arrow platform seen on the S2 Del Mar, which is centered around a structural battery that allows for multiple bikes to be built around a similar architecture.
–Micah Toll
See the whole tamale on Electrek.com
New FICTION Bikernet Reader Comment!–Bikernet 100 Word Fiction Contest 2024
https://www.bikernet.com/pages/Bikernet_100_Word_Fiction_Contest_2024.aspx
Damn, these are heart-felt passages, a sense of poetry without the rhyme …
–Anson Alexander
Long Creek, SC
BIKERNET DOCUMENTARY REVIEW OF THE WEEK—Climate the Movie
Climate The Movie: The Cold Truth is now available to view at no cost! Director Martin Durkin and Producer Tom Nelson want to share this far and wide. Please view here — then share the link with everyone!
The film includes interviews with a number of very prominent scientists associated with the CO2 Coalition, including Coalition Chairman Dr. William Happer along with Board members Dr. Patrick Moore (co-founder of Greenpeace) and Dr. John Clauser (2022 Nobel Laureate in Physics). Also included are Coalition members Roy Spencer and Tony Heller.
From CO2 Coalition Member and Producer Tom Nelson’s Substack:
This film exposes the climate alarm as an invented scare without any basis in science. It shows that mainstream studies and official data do not support the claim that we are witnessing an increase in extreme weather events – hurricanes, droughts, heatwaves, wildfires and all the rest. It emphatically counters the claim that current temperatures and levels of atmospheric CO2 are unusually and worryingly high.
On the contrary, it is very clearly the case, as can be seen in all mainstream studies, that, compared to the last half billion years of earth’s history, both current temperatures and CO2 levels are extremely and unusually low. We are currently in an ice age. It also shows that there is no evidence that changing levels of CO2 (it has changed many times) has ever ‘driven’ climate change in the past.
–CO2 Coalition
New Bikernet Reader Comment! —OUTRUSH R MODULAR BLUETOOTH HELMET
https://www.bikernet.com/pages/OUTRUSH_R_MODULAR_BLUETOOTH_HELMET.aspx
As usual, I enjoyed this article by Rogue.
–Sam
TX
LATEST FROM PAUGHCO–DirtyBiker 2-1 Evo Sportster Exhaust 1986-2003
DirtyBiker X Paughco Exhaust
(PRE-ORDER-ships in 4-8 weeks more details coming soon.)
This is a two piece 2-1 exhaust designed by Josh “DirtyBiker” Sheehan and produced by Paughco. The goal with this version was to create another signature “DirtyBiker” exhaust for the H-D Sportster’s from 1986-2003 in rigid and swingarm frames.
Fits 1986-2003 engines in rigid frames and swingarm frames. With a tip of the hat to Dick Allen and the Alphabet co. It was time for that classic exhaust style to make a comeback. Ironhead’s rule, so does this exhaust. I hope you dig it too.
Here’s what it will fit:
•1986-2003
Here’s what it won’t fit:
•TBD
For rigid applications:
*slider channel on the back side of the front exhaust pipe just below the exhaust collector. Attach to the lower frame rail in front of the axle plate. You can do this one of two ways.
Either weld a mounting tab to the lower frame rail, or use the mounting kit offered by Paughco (possible option coming soon). You might need to modify a tab to fit, but you’re a chopper dude/dudette. I have faith in you!
100% made in house at Paughco. 100% American made. 1000% DirtyBiker shit.
T-bolts are included to use with slider channels welded on exhaust system.
BANDIT’S CANTINA BAD JOKE LIBRARY IS WIDE OPEN–LEMON PICKERS NEEDED IN FLORIDA – ONLY US CITIZENS OR LEGAL IMMIGRANTS NEED APPLY.
“Lemon Pickers Needed” read the ad in the newspaper.
Ms. Sally Mulligan of Coral Springs , Florida, read it, and decided to apply for one of the jobs that most Americans are not willing to do.
She submitted her application for a job in a Florida lemon grove but seemed far too qualified for the job.
She has a liberal arts degree from the University of Michigan, and a master’s degree from Michigan State University.
For a number of years, she had worked as a social worker, and also as a school teacher.
The foreman studied her application, frowned and said, “I see that you are well educated, and have an impressive resume. However, I have to ask you, have you had any actual experience in picking lemons?”
“Well, as a matter of fact, I have,” she said… “I’ve been divorced three times, owned two Chryslers, and voted for Biden.”
She started work yesterday…
–El Waggs
INDIAN MOTORCYCLE RACING AND REIGHNING CHAMPION JARED MEES SECURE FIRST VICTORY OF 2024 SEASON AT SENOIA SHORT TRACK
Mees Edges Out the Competition Aboard Indian FTR750, Moving into Third in Overall Standings
Fellow Indian FTR750 Rider Brandon Robinson Rounds out the Podium in Third
Indian Motorcycle Racing had a stellar showing at round three of the 2024 American Flat Track series in Senoia, Georgia, for the Senoia Short Track. It was nine-time champion Jared Mees scoring his first victory of the year aboard his Indian FTR750, moving him into third in the championship. Fellow Indian Motorcycle-supported racer Brandon Robinson rounded out the top three aboard his Indian FTR750 privateer ride.
After a slow start to the season, Mees, the reigning champion, made a strong statement in Senoia that he’s still at the top of his game and the rider to beat. Despite an unwanted starting position, he used it as motivation to rocket his FTR750 off the line when the green flag waved to take over the lead quickly.
Mees was overtaken a short time later but maintained his speed and stayed within striking distance to regain the lead a few laps later. Once out front, Mees didn’t look back throughout the remainder of the 36-lap race, taking the checkered flag and winning by 1.6 seconds.
“This was a solid showing for Jared and the Indian Motorcycle team, securing the win and keeping him within striking distance in the chase for his 10th-career championship,” said Gary Gray, Vice President of Racing & Service for Indian Motorcycle. “Although the weekend didn’t go completely how he’d like, it was important for him to get this win under his belt. There is still a lot of racing left this season, and this victory provide him and his team momentum going next month’s race in Texas.”
“It was a challenging start to the season so to come away with the win tonight is incredible,” said Mees. “I struggled throughout the day and during qualifying so was a little worried but after making some changes to the bike it performed phenomenally in the Main event. Everything I had been wanting it to do all day, finally came to me and it paid off. I can’t thank the Indian team enough for the support.
After three rounds, Mees sits third in the championship chase with 54 points, a mere 10 points off the lead. Currently tied with Scottie Parker with the most career championships, Mees is looking to secure his spot in the history books as the all-time greatest flat track racer with a 2024 championship, earning him 10-career titles. Of his nine-career championships, Mees has five while piloting the Indian FTR750, coming in 2017, 2018, 2021, 2022, and 2023.
The 2024 American Flat Track season continues on April 27 for the Texas Half-Mile in Fort Worth, TX.
For more information on Indian Motorcycle Racing, visit IndianMotorcycle.com and follow along on Facebook, X and Instagram.
TWO MAJOR CALIFA H-D DEALERSHIPS TO CLOSE—
San Francisco Harley closed permanently and Laidlaws is for sale. If it doesn’t sell, it also may close…
–Bandit
STUMP’S LATEST UPDATE–
SB24-079 (Lane Filtering) passed both chambers and sent to the Governor for his signature. Passed 3rd reading in House by vote of 36 to 27 with 2 absent. Only one cosponsor (Rep. Ortiz) beside 2 original House cosponsors. Questioned Senator Hinrichsen about timeline – goes into effect Aug. 7th 2024 / repealed (sunset) Sept. 1, 2027 / but data report by CDOT by Jan. 1, 2027! Depending on how long it takes to analyze data, they’d have 27 months of data max. – 12 months of “prime” riding months!
SB24-036 (Vulnerable Road User) heard in Senate Finance Committee on Tuesday, 3/19. Sponsor ordered the bill PI because it couldn’t be funded the way it was written. Another bill will be introduced written a way that it can be funded by the “Faster Fund”. Explain FASTER Fund.
A third bill, SB24-065 (Use of Mobile Electronic Devices While Driving) has passed the Senate and assigned to the House committee Transportation, Housing & Local Government. It is scheduled for a hearing April 3.
The Colorado legislature’s regular session meets for 120 days. They are now in day 72.
–Deb Craig
MRF Corporate Secretary
NEWS FROM GREASY KULTURE—Issues 81 and 66 – gone!
Our back issue bundles are selling like hot cakes – which means our magazine stock is disappearing. We sold out of all remaining copies of issues 66 and 81 in just the past few days!
Good news for us, but not so good if you’re still missing some older issues. So grab those digest-sized or premium back issues to fill the gaps in your collection and do it before they’re gone. Because they’re going fast!
In other news, new issue 98 is just around the corner… and you won’t want to miss it! We found a bike that was in The Wild One movie…
THE LATEST FROM THE TEMPLE OF INSPIRATION–Decide!
More than anything else, I believe it’s our decisions, not the conditions of our lives that determine our destiny.
“Your life changes the moment you make a new, congruent, and committed decision.”–Tony Robbins
Life is a canvas upon which we paint our attention. As Napoleon Hill wisely stated, “What the Mind can conceive and believe, the Mind will achieve.” Each day presents us with choices, amidst the backdrop of our inner struggles, fears, and challenges. However, the manner in which we navigate these challenges is ultimately our decision.
We possess an innate Power that transcends any obstacle, supported by the Universal Law of cause and effect. Henry Ford succinctly captured this essence: “If you think you can or you think you can’t, you’re right.” Similarly, Buddha emphasized the profound influence of our thoughts on our reality: “What we think, we become.”
It is crucial to monitor our internal dialogue—are our thoughts and conversations uplifting or limiting? Do we dwell on problems or seek out solutions?
“You hold the power to shape your reality,” as Ford suggested.
AND SO IT IS .
Namaste.
–Yale
Doctor of faith
Remember the words of Wayne Dyer: “Be miserable or motivate yourself. Whatever has to be done, it’s always your choice.”
THE LATEST FROM BABES RIDE OUT–RIDERS WITH THE HARLEY-DAVIDSON APP & PART OF THE BABES RIDE OUT COMMUNITY GROUP WILL HAVE BABES IN DEADWOOD EARLY ACCESS TO TICKETS!
Want first access to the Babes in Deadwood event July 11-14th? No problem! Download the Harley-Davidson app and join the Babes Ride Out Community Group. Ticket link with password will be “leaked” there Thursday (3/28) am! Here is how to get the app and find the group 🙂
STEP 1: DOWNLOAD THE HARLEY-DAVIDSON APP & CREATE A PROFILE
The Harley-Davidson App for iOS can be downloaded here.
The Harley-Davidson App for Android can be downloaded here.
Not on your phone right now? Click on the “Download App” button below to get a QR code to scan with your phone.
STAFF 100-WORD FICTION SUBMISSION–Fuzzy
I swayed left and right, twisting the throttle, pushing and pulling at the handlebars. Tense, I sweat through a hot early morning in June. If only I could ride another 200 miles, I know I would be at peace.
This time yesterday, I kickstarted my journey to the heartland. There were no goodbyes at work, maybe no welcomes at my destination, my home. As I evaded the bustling traffic on the interstate, the many commuters dissolved, my mind picturing her smile, her yellow gown, her rare recipes and most of all, her patience with me.
The oil rig fellas pitched in to do my share, as I took off to a final resting place. Mom’s fading fast. Will she remember me in her condition? I gotta stay awake to fulfill her dreams. I promised to be by her side.
–Wayfarer
Author, Editor, Digital Artist
NEVER GIVE UP—I shoot the shit with friends who don’t want to have anything to do with politics, but it’s our country. I know guys who are afraid to get involved. It’s concerning. People are being arrested for stepping up and voicing their opinions, but we can’t give in, ever. I know motorcycle rights groups who don’t want to upset folks who are deliberately trying to destroy the country. Tough call.
Think about it. I’m trying to build a couple of new project bikes when they plan to ban all ICE engines behind lies.
I’m working with companies like Paughco. They have a chrome shop. Europe currently is trying to ban all chrome shops.
I received this Paughco tin primary for an alternator motor. I sliced and diced it to make a primary chain guard. Plans changed and then came together.
Zack in Long Beach got himself a new French Bulldog but some guys in the government want to ban pets. Remember they breathe CO2, shit and piss.
If you order Black bike star hub wheels with newer Timken bearings, Paughco now makes the axle. It’s just slightly different from stock, but different enough to create a serious problem.
Kent Weeks from Lucky Devil Metalworks in Houston is a talented guy and we discussed petcocks and gas caps. If you have this type of gas cap and it’s flush mounted, you can’t fill your dinky tank. It will leak.
Then we kicked around inline petcocks for our dreaded Fossil Fuels. I bought fittings with a 5/16 ID for better flow to the 93-inch S&S engine. I discovered to my dismay many petcocks have less than a 1/4-inch hole through the valve.
I dug around and found this little sleek petcock with a solid ¼-inch hole. Carl Olsen told me it doesn’t matter because of the float bowl capacity. But, but…
But hang on. I have pals who don’t vote. What the fuck? No wonder the government is crumbling.
I’m riding free forever or die trying, goddammit.
–Bandit
