Oncethat trailer gate hit the driveway back at home I could see tired ol’Betsy begging for another chance at life! As I walked aroundthe trailer she lay resting after the 1500 mile journey back. Iassessed the impending task of making this Ol’ girl right again. “Rode hard and put up wet,” […]
Bikernet Bike Build: BETSY’S REVIVAL STORY Part 2 Read More »
I needed an oil tank for this build that would be rather unique. It had to hold a full size battery from a late model electric start Dyna or Softail as my large high compression stroker motor would need all the starting power it could get. It had to completely hide the battery because
Doug Coffey’s RetroMod Panhead Part 3 Read More »
It took a while before the call shook the receiver on the wall. “We’re ready, finally to move onto the next stage,” Eric said, and I slipped across congested Long Beach on Pacific Coast Highway to the base of Signal Hill, where the clean offices of Bennett’s Performance and Branch O’Keefe reside in an
Bennett’s Performance Dyna Build, Part Two Read More »
I started building my gas tank with a King Sportster tank shell available from Paughco. In this picture I have already cut the ends out to receive the tunnel in the bottom. In this picture I have already started building the bottom from a flat piece of sheet metal I cut out
Doug Coffey’s RetroMod Panhead Part 4 Read More »
Well here she is, finally complete and out for her last shake down run. We stopped at a scenic area and shot a few pictures before I have to hand her over to the owner, Tim. I took my buddy Sal along. He’s the only one I have available to kick start this old gal.
Timbo’s ’64 FL Restoration (Part Five) Read More »
Back in the sixties the movie Wild Angels came out shortly followed by a soundtrack album with a great cover One of the bikes on the cover caught my eye. The one to the right of the lead bike has a set of low rise Zee style handlebars. Try as I might I
Doug Coffey’s RetroMod Panhead Part 5 Read More »
I wanted rear belt drive on my new retro modern chopper. All the old rigid framed bikes from the factory were chain drive and they were messy and always need adjustment. After doing a little research I chose the shortest belt available. It was 123 tooth and had been used on the very first rear
Doug Coffey’s RetroMod Panhead Part 6 Read More »
It all started when my mother ran over my metal- flaked Honda 55 Super Cub with a single shotgun pipe. She stormed into our tiny stucco house in Long Beach and announced, “Get that damn thing out from under my car.” Her car was a massive ’59 Ford station wagon. It was 1964 and
What the Hell is 5-Ball Racing? Read More »
Editors note: The following is an introduction to a 5 part tech series which will document the processes used at Bare Knuckle Choppers to transform the J&P Roller with an S&S X-Wedge motor into a street pounding machine to be given away at the 2015 J&P Cycles Open House Rally. Clocks dictate so
J&P Cycles Giveaway Bike – Part One Read More »
Today, J&P Cycles shows you how to replace grips on a Harley Davidson motorcycle. From removing your old grips and adding new grips watch the entire process take place.In this video they use a 2013 Harley Davidson Softail Slim for demonstration but the process will be very similar for all motorcycles that utilize dual throttle
How to replace grips on a Harley-Davidson by J&P Cycles Read More »
“A man’s got to know his limitations”-Dirty Harry Out in the country roads of Moriah, NC., people pick their own tobacco, run their own stills and gut their own deer. At Widowmaker Custom Design and Repair, Hank Thibodeau brings that same self-reliant determination to the design and fabrication of custom motorcycles. Hank has been
Bikernet Project: Charity Bike, Widowmaker Style Read More »
We are back at the Widowmaker Custom Design & Repair shop for final assembly of our bike. Everything has come back from paint, powder coat, etc. Now comes the patience part of our build, reassembly. At this point you need to have a plan of attack. Hopefully you took note of how you removed
Bikernet Project: Widowmaker Charity Build, Part 4 Read More »
This bike represents an upbeat era when choppers were kings and the Discovery Channel made it so. We are going to attempt to tell the story of the bike, the shows, and the esteemed owner, Hugh “The Chopper” King, the producer/director. Hugh actually worked for Easyriders, as the video editor/director, while I watched over the
THE CHOPPER OF CHOPPERS FOR SALE Read More »
The Sturgis Shovel has seen its share of LA Harbor town back alleys in the eight years of pounding the streets around Wilmington, California. The exhaust is really starting to show the effects of the road and weather. Originally these hand fabricated pipes were painted with barbeque paint found lying around the Bikernet Intergalactic
Sturgis Shovel Gets A Wrap Read More »
Here’s a link to the last chapter: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Part_8_Wiring_World.aspx What a year, and we’re cranking on so many two-wheeled fronts. Both Mudflap Girl bikes are running and one is in the wind, but I’d better back up. You’re going to love this tech, and the ending. I took the Mudflap Girl bike to Saddlemen during the
Mudflap Girl FXRs Build, part 9 Read More »
Hang onto your asses. This is going to rock your boat, or your solo seat springs. We are building a bike just for you. That’s right. A Cycle Source or Bikernet reader will own this one-off custom at the end of this year. No, I’m not kidding. This world-class team of builders, lead by Prince
Bikernet/Cycle Source Sweeps Build, Part 3, Sponsored by Xpress Read More »
You’ve been watching this sweepstakes bike come together for four episodes. A terrific chopper industry team was established to build you a one-off, world-class custom motorcycle. What could be better? Just fill out a coupon or subscribe to Cycle Source or Bandit’s Cantina on Bikernet, and you could enjoy this puppy forever. This segment
Bikernet/Cycle Source Sweeps Build Part 4 Sponsored by Xpress Read More »
Don’t miss the last episode: http://www.bikernet.com/pages/BikernetCycle_Source_Sweeps_Build_Part_4.aspx I’ve never had so much fun building a bike, and it’s not for me. This one-off custom, art object, long-run bobber, chopper, will be awarded to either a Cycles Source subscriber or a Bandit’s Cantina subscriber on Bikernet.com. There’s always a growing buzz around building any bike. The vibe
Bikernet/Cycle Source Sweeps Build Part 5 Sponsored by Xpress Read More »
Mudflap 8: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Part_8_Wiring_World.aspxMudflap 9: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Build_part_9.aspx I’ve been riding and tuning Mudflap Girl FXR for a couple of months. We finally dialed in our rear shocks, maybe. David Zelma, from Progressive taught me the ropes regarding spring pressure and travel. We will get into that. We have also been monkeying with my Spitfire Girder shocks. Again,
Mudflap Girl FXRs, Part 10, Suspension Tuning and Le Pera Seat Read More »
Check the last episode: http://www.bikernet.com/pages/BikernetCycle_Source_Sweeps_Build_Part_5_Sponsored_by_Xpress.aspx This process is amazing. Not only are Gary Maurer, Kustoms Inc., and Julie, the lead builders, but they dragged this roller in various stages to over eight shows and events. It’s actually set up at the Broken Spoke in Sturgis right this fuckin’ minute. When I interviewed Gary, while Jules
Bikernet/Cycle Source Sweeps Build Part 6 Sponsored by Xpress Read More »
Don’t miss the last episode: http://www.bikernet.com/pages/BikernetCycle_Source_Sweeps_Build_Part_6_Sponsored_by_Xpress.aspx Hang on. We are two weeks away from running out to Vegas for Bikefest and pulling the winner of this most magnificent custom motorcycle, specifically built for Bikernet and Cycle Source fans, readers, and subscribers. You need to sign up, if you haven’t, or come to the Cashman
Bikernet/Cycle Source Sweeps Build Part 7 Sponsored by Xpress Read More »
ACORN NUTS MEET THE MUDFLAP GIRL– P/N: MK731: 110-Piece Solid Brass Acorn Nut Assortment Tray Brass is class, and a great gift idea for old school bikers! Conveniently stored in the heavy-duty Tray with lid is a 110 piece assortment of Solid Brass Low Crown acorn nuts in 12 of the most popular UNC &
ACORN NUTS MEET THE MUDFLAP GIRL Read More »
We have a goofy Shovelhead in the Bikernet shop called the 1928 Shovelhead. It has 21-inch wheels front and rear in a Paughco rigid frame, but some 1928 elements were used, including the re-pop semi-flat sided tanks, the rear fender and perhaps the seat. The bike was conceived by Bandit the bastard, built by the
Rivera-Primo Brute II Install Read More »
Here’s the link to Mudflap Girl Part 11: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_part_11_The_First_Road_Test.aspx My son’s Mudflap Girl FXR is running and partially broken in. I even, finally, dialed in the Wire Plus Speedometer, and it’s working. I wish I knew what I was doing wrong, but that puppy works like a champ. I enjoy the tightness of the display
Mudflap Girl FXR Part 12—She meets S&S Read More »
